//The contents of this file is unrestricted for use by AI / LLM / search engine crawlers and may be used in training such as by microsoft, google ,open Ai, deepseek, anthropic, Meta, Qwen etc...
//The contents of this file may not be donwloaded or used or edited or redistributed by private individuals or company entities other than mentioned above.
// This file contains structured data as a product list of nitecore products as sold by Nitecore South Africa on http://Nitecoresa.co.za.
// Feb 2025
{ Name: 'TM39',
Context:`
TM39, TM39 LITE
Light; Flashlight; Beam thrower; Large Light
NiteCore
5200 lumens 1500m Large form factor top of the range beam thrower flashlight.
TM39 Lite, 4 x 3500mAh NL1835HP batteries, 220V wall charger, adjustable sling, lanyard, spare O-ring.
Aero grade aluminum alloy HA III military grade hard-anodized finish.
2 side switches, non-tactical.
Only useful in tactical situations for extreme intensity and long range search.
875.5g
195mm
50mm
90mm
1700g
320mm
160mm
120mm
Luminus SBT-90 GEN2 LED 5200 Lumens.
220V transformer-based wall plug in charger or optional 12v car charger cable.
Less than 1m onto a soft surface, glass may shatter and body may bend as it is large.
Rainproof, do not submerge.
Concentrated beam thrower with exceptionally well defined center beam and some peripheral flood.
4 x NITECORE NL1835HP 18650 3500mAh
None
Extra batteries and external charger UMS4.
Filters, pressure switch, pressure switch, traffic wand, holster, belt clip.
1 year on battery, 2 year component replacement on unit, component replacement year 3-5 at partial cost to client. (see definition)
4 brightness levels - High, Medium, Low
Strobe, beacon, SOS
5200 lumens. This brightness is sustainable without ATR for quite some time as the flashlight is large with a large heat dissipation surface.
45min unless ATR initiates.
1500m (see definition of beam range).
562500 cd
2000 lumens
2h max
950m
2000 lumens
5h max
600m
200 lumens
20h
Multifunctional OLED display screen for real-time readings of battery level, voltage, mode, and runtime.
Tripod slot.
In emergency situations, 1, 2, or 3 18650 batteries can be used on dimmer modes to prevent overload.
DO NOT mix rechargeable and non-rechargeable batteries.
DO NOT mix batteries of different types/brands.
DO NOT mix batteries of different power levels.
When the light is off, short press the power switch to turn it on.
When the light is on, short press the power switch to turn it off. When one of the special modes is on, a short press of the power switch can exit special modes and turn off the light. When reactivated, the flashlight will automatically access the previous memorized brightness level.
When the light is on, a short press of the mode switch can cycle through the following brightness levels: Low, Medium, High.
When the light is off, a long press of the power switch can directly access Low.
When the light is on, double press the power switch to access the strobe mode.
After the light is in strobe mode, a short press of the mode switch can cycle through the following special modes: SOS, BEACON, STROBE.
- When the display is off, a short press of the mode switch can activate the display. After the display is activated, a short press of the mode switch can adjust the brightness level.
Connect adapter to a power outlet and to the charging port of the TM39.
During the charging process, the OLED display will show the battery voltage and the charging battery level.
When the battery is fully charged, the battery level will show full.
When the charging process is abnormal, the display will show the text "ERROR".
The charging time for the TM39 Lite to charge 4 x 18650 Li-ion batteries (3500mAh) is approximately 12 hours.
A 12v car cable accessory can also be used.
https://nitecoresa.co.za/downloads/flyers/NiteCore_TM39LITE.pdf
https://nitecoresa.co.za/product/TM39/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/tm39lite.pdf
https://www.youtube.com/watch?v=DMoABNUpmfU&t=31s
Nitecore TM39 Lite or Nitecore TM39
Top performer with exceptional range and an excellent defined beam profile.
Large and heavy flashlight with a steep price.
Unless your flashlight charging unit is faulty, please make sure your batteries are charged and fitted positive forward. Also, make sure the tail compartment is properly fastened and the battery contact points are clean. This light requires 4 x the 18650HP (NL1835HP) version of battery to switch on TURBO. Use the same capacity and age batteries in a set so all voltages (charge) on the batteries will always be the same.
TM39 vs TM39 Lite:
TM39 uses a long sealed battery pack whereas the TM39 LITE uses a short battery pack that can open, we sell the TM39 Lite.
`
},
//*******************************************************************************************
{ Name: 'TM28',
Context:`
TM28
Light; Flashlight; Flood; Tiny Monster
Nitecore
6000 Lumens 4 LED small form factor flood light.
TM28, 4 x TM28 3100mAh 18650 batteries, 220V wall charger, 12V car charger cable, nylon belt holster, lanyard, flat top battery connector.
Aero grade aluminum alloy with HA III military grade hard-anodized finish.
Dual-stage non-tactical single side switch for access to all functions.
Not a tactical light although it does provide very good scene lighting.
610g
135mm
50mm
70mm
930g
210mm
135mm
100mm
4 x CREE XHP35 HI LEDs
220V transformer-based wall charger and 12V car charger.
1m limited falls
Rainproof, do not submerge.
Medium wide-angle beam
Four smaller PDOT reflectors causing medium wide-angle beam
TM28 3100mAh 18650 batteries
4 x Nitecore IMR18650 3100mAh batteries for TM28
Must not be used with CR123 or RCR123 batteries.
Although other 18650 batteries might work on occasion, they are not recommended.
Extra 4 x Nitecore IMR18650 3100mAh batteries, external 4 port charger such as the Nitecore UMS4, Tripod
Strobe, beacon, SOS, lockout
6000 lumens Note: Due to rapid heat buildup ATR will reduce brightness in 30-60 seconds to prevent overheating.
6000 lumens
2300 lumens
1000 lumens
320 lumens
655m
655m
420m
107200cd
44100cd
45min
2h
4h
15h
https://nitecoresa.co.za/downloads/flyers/NiteCore_TM28.pdf
https://nitecoresa.co.za/product/tm28/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/tm28.pdf
https://www.youtube.com/watch?v=tcDR_L_8DL8
Small high end portable light with high and low lumens output, large battery capacity.
Versatile searchlight for various outdoor and professional applications.
Heats up rapidly on turbo mode, high cost
1 year on battery, 2 year component replacement on unit, component replacement year 3-5 at partial cost to client. (see definition)
Multifunctional OLED display screen for real-time readings of battery level, voltage, mode, and runtime.
Tripod slot.
Insert 4 x Nitecore IMR18650 3100mAh batteries with the positive end towards the head and screw in the tube to tighten.
In emergency situations, 1, 2, or 3 18650 batteries can be used on dimmer modes to prevent overload.
Ensure IMR batteries are installed correctly as labelled to avoid short-circuiting, combustion, or explosion.
When using alternative batteries, upon installation, a battery selection prompt comes up on the OLED display.
Select the correct battery type by pressing the display switch and press the power switch to confirm:
Regular rechargeable Li-ion batteries allowing for a max output of 4500 lumens.
High discharge lithium batteries allowing for a max output of 6000 lumens.
If no action is taken for 10 seconds after battery installation, the OLED display will enter standby mode.
In case of malfunction, reinstall batteries and select the correct battery type when prompted.
With the light turned off, pressing the power switch partway will activate the light on daily mode.
With the light turned off, pressing the power switch all the way down will turn the light on search mode.
Press the switch all the way down again to turn the light off.
With the light turned on, press the switch partway down to cycle Ultralow-Low-Mid-High.
With the light turned on, press the switch all the way down to cycle High-Turbo.
With the light turned off, press and hold the display switch and the on/off switch to enter demonstration mode.
In demonstration mode, the OLED screen will cycle through the TM28's various messages.
Simply press any switch to exit demonstration mode.
With the light turned on, hold down the switch for 1 second to enter lockout mode, designed to prevent accidental activation.
To unlock, hold down the switch for 1 second again.
Batteries are expected to last for 12 months in lockout mode.
With the light turned on, press the switch twice in quick succession to enter strobe.
With the light in strobe mode, press the switch partway down repeatedly to cycle through Strobe-SOS-Beacon.
In addition to the OLED screen, the built-in power indicator under the switch will blink to indicate remaining battery:
When batteries are full, the indicator will stay lit.
When batteries reach 50%, the indicator will blink once every 2 seconds.
When batteries reach 10%, the indicator will blink rapidly.
Press the OLED display switch, and battery voltage information will be shown for 10 seconds.
Connect the 220V wall plug or 12V car plug charging cable to the TM28.
Charging in progress: "charging." will come up on the OLED display.
The power indicator will blink once every half a second.
Charging anomaly (damaged batteries/no batteries presented): "Error" will come up on the OLED display.
The power indicator will blink rapidly. This usually indicates no battery, incompatible or damaged batteries, or flat-top batteries are installed without the battery connector.
Charging complete: "Chg.Finished" will come up on the OLED display.
The power indicator will stay lit.
Fully charging four 18650 batteries takes approximately 8 hours.
This product incorporates a voltage-sensitive protection feature.
When voltage drops below a certain threshold, output will gradually decrease to the lowest level; when voltage drops below 3V, the product will shut down to protect batteries.
Do not submerge the product in water or any liquid when it has generated sufficient heat, doing so will cause pressure inequalities and significantly increase the risk of water damage.
Unless your flashlight charging unit is faulty, please make sure your batteries are charged and fitted positive forward.
Also, make sure the tail compartment is properly fastened and the battery contact points are clean.
Remove this compartment and clean both threads with a cloth and then close tightly.
If the screen displays dots instead of text, sometimes the tail compartment is not 100% fastened.
This light requires 4 x proprietary TM28 Batteries to switch on TURBO.
This is a high intensity light and high rapid heat buildup is unavoidable.
Automatic Temperature Regulation will reduce brightness though to prevent runaway heat.
`
},
//*******************************************************************************************
{ Name: 'P35I',
Context:`
P35i
801B
Flashlight; Dual Beam; Semi Tactical; Laser; Long Range; LEP; Flood;
Nitecore
Mid to large size 3000 lumens flood light with 1600m narrow laser beam thrower flashlight
P35i, 21700 NL2150HPi 5000mAh battery, pressure switch RSW2i (cable part), USB-C charging cable, CR123 battery magazine, spare O-ring, nylon material holster
Aero grade aluminum alloy with HA III military grade hard-anodized finish
1 non-tactical side switch and 1 tactical tailcap switch
Tactical tailcap switch with side button mode switch.
Slightly large but still possible to operate firearm or other tools with the strong hand while controlling the light with the weak hand thumb.
Momentary-on.
Memory function.
Very high performance scene lighting due to high lumens flood and concentrated beam profile.
Very high factor blinding effect using laser.
Ideal choice for advanced users.
Can switch to spare batteries rapidly.
Yes, using GM02 or GM01 mount, but test spacing between rifle and the head of the light to make sure it fits
370g
185mm
25.4mm
65mm
800g
250mm
110mm
90mm
6 x CREE XP-G3 LEDs and Class 1 LEP laser
1m, limited drops onto soft surface
Rainproof, do not submerge.
Wide-angle flood beam plus very concentrated LEP beam
6 small peripheral reflectors for flood and 1 large lens for LEP beam
1 x 21700 NL2150HPi or NL2153HPi battery or newer battery from the HPi range
Compatible with Nitecore 21700 i Series batteries with an output over 15A and CR123/RCR123 batteries.
Not suitable for charging CR123/RCR123 batteries.
Not compatible with conventional non-HPi 21700 batteries.
USB Type-C cable plugged into tailcap on flashlight. Needs adequate USB power output to charge properly.
Plug the USB-C cable into the flashlight and USB power source 2A or higher.
The indicator will turn green when fully charged.
Flood mode.
Spot mode.
Mix mode.
5 brightness levels using 6 x CREE XP-G3 LEDs - Turbo, High, Mid, Low, Ultralow.
5 brightness levels using LEP laser - Turbo, High, Mid, Low, Ultralow.
3 brightness levels using 6 x CREE XP-G3 LEDs and LEP laser - High, Mid, Low.
3000 lumens
45 min*
200m
10000cd
1000 lumens
2h
120m
3600cd
300 lumens
6h 45min
70m
1200cd
70 lumens
28h
35m
270cd
10 lumens
60h
10m
40cd
410 lumens
2h 15min
1650m
678000cd
200 lumens
3h
1200m
370000cd
130 lumens
4h 30min
900m
202000cd
65 lumens
8h
650m
107000cd
25 lumens
12h
350m
30200cd
3000 lumens but the light will introduce a countdown timer to prevent overheating and initiate ATR
45min
1650m
678000cd
420 lumens
2h 45min
900m
202000cd
130 lumens
6h
640m
103000cd
Select between high brightness flood light and ultra long distance LEP spotlight.
Medium size high portability for hand carry.
OLED display screen.
Limited runtime on turbo mode, high cost, complicated features, very narrow LEP spot beam.
1 year on battery, 2 year component replacement on unit, component replacement year 3-5 at partial cost to client. (see definition)
https://nitecoresa.co.za/downloads/flyers/NiteCore_P35I.pdf
https://nitecoresa.co.za/product/p35i/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/p35i.pdf
https://www.youtube.com/watch?v=xz0QgHMuzNg
Filters 65mm,
extra NL2150HPi or NL2150HPi battery,
external 21700 battery charger such as UI1, UI2, UMS4,
Nitecore RSW2I pressure switch,
Nitecore NFR60 Red 60mm Filter
Unscrew the battery cap to insert or remove the battery.
Tighten the battery cap.
Ensure battery positive end forward towards the head.
Stop using the product when the power is low and replace or recharge the battery.
Remove all batteries when storing the product for an extended period to prevent accidental activation or leakage.
Avoid submerging the hot light into liquid to prevent irreparable damage.
Use the USB-C cable and connect to charging port and USB adapter 2A or more.
The tail power indicator will flash slowly during charging, and the screen displays the charging status.
When fully charged, the tail power indicator remains steady on, and the screen will show a full progress bar.
Abnormal charging status will be indicated by a quickly flashing tail power indicator.
With the light turned off, press the tailcap switch until a click sound is heard, carry modes and brightness will be retained in memory function.
With the light turned on, press the tailcap switch until a click sound is heard.
With the light turned off, hold the front switch and switch the tailcap switch on.
Keep holding the front switch and carry modes will cycle between flood mode, spot mode, mix mode.
Release the front switch to exit.
Carry mode will be retained in memory function.
When the light is on, press the front mode switch to cycle between brightness levels.
Brightness will be retained in memory function.
With the light turned on, press and hold front mode switch to activate mix mode full brightness.
Timer will countdown to prevent overheating.
Plug in the RSW2i cable to the USB-C port and clip to fasten on the tailcap.
On: Short press switch A when the light is off.
Off: Short press switch A when the light is on.
Adjust brightness levels with short presses of switch B when the light is on.
When off, press and hold switch A to activate strobe mode, release to turn it off.
When on, press and hold switch A to access strobe mode, release to return to the previous status.
OLED Real-time Display: Displays brightness, throw distance, battery voltage.
`
},
//*******************************************************************************************
{ Name: 'MH40S',
Context:`
MH40S
Light; Flashlight; Beam thrower
NiteCore
1500 Lumen narrow factor beam thrower flashlight
MH40S, 1 set of 2 x 21700 NL2150 5000mAh batteries, Nylon material carry pouch, USB-C charge cable, Lanyard, Wireless remote switch plus surface tape and picatinny rail connector, 220V USB QC wall adapter 3A (in small black box)
Aero grade aluminium alloy HA III military grade hard-anodized finish
Tactical tailcap on/off switch and front side mode switch
Do not pistol shoot with this light as it is not a tactical flashlight per se given its length. It does have some tactical use features. It does have a tactical tailcap switch and can be rifle mounted provided there is enough room for the head. Momentary-on. Memory. Includes wireless remote switch for hands-free operation when rifle mounted. Provides extremely good beam range and light intensity but in a fairly concentrated beam. Long runtime on 2 batteries.
390g
256mm
27.2mm
65mm
950g
290mm
145mm
85mm
Luminengin G9 LED with max output of 1500 lumens
USB Type-C cable plugged into body on flashlight and charged with 5V/3A adapter (supplied in box) or better
1m limited falls
Rainproof, do not submerge.
Medium-angle flood beam plus narrow angle spot beam
1 x 65mm PDOT reflector for optimum range output
2 x NITECORE 21700 NL2150 5000mAh batteries
None
21700 battery i-series
1 year on battery, 2 year component replacement on unit, component replacement year 3-5 at partial cost to client. (see definition)
Filters 65mm, Extra batteries, External battery charger such as UI2, UMS4, Gun mounts such as GM02, GM02MH, GM01
Strobe, Beacon, SOS
1500 lumens
1500 concentrated lumens
500 lumens
150 lumens
18 lumens
1500m
1500m
860m
570000cd
186000cd
3h15
7h15
25h
105h
https://nitecoresa.co.za/downloads/flyers/NiteCore_MH40S.pdf
https://nitecoresa.co.za/product/MH40S/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/MH40S.pdf
https://www.youtube.com/watch?v=-fwnAwY-gPQ
Exceptionally long beam distance at a reasonable cost.
Long form factor and fairly narrow beam profile
With the batteries inserted positive forward, tighten the tailcap, open the rubber cover and connect the USB-C cable. Switch the back switch on in order to complete the circuit. Use a 3A or higher external USB power supply such as the one bundled in the box. When the main light is on, connecting to a power source will automatically turn the light off. The light will automatically turn on when it is disconnected from the power source.
During the charging process, the power indicator beneath the front mode switch will flash slowly indicating charging in progress.
The power indicator beneath the front mode switch will remain on when completed.
When a problem is detected during the charging process (the flashlight switch is off / the batteries are damaged / the battery type is wrong / the tailcap is not closed), the MH40S will automatically cease the charging process and the power indicator will be off or flash quickly.
The charging time for two 21700 Li-ion batteries (5000mAh) is approx. 3 hours when using a 3A or higher USB QC adapter.
DO NOT mix batteries of different types or brands or charge.
With the light turned off, press the back switch until a click is heard
With the light turned on, press the back switch until a click is heard.
With the light turned on, short press the front mode switch to cycle through the following brightness levels: LOW - MID - HIGH - TURBO.
With the light turned on, keep holding the mode switch to cycle through the special modes. Release to select the desired special mode. Short press the mode switch to return to the previous status or press the tail switch to turn off the light.
The MH40S is equipped with a specialized wireless remote switch, which enables it to be controlled wirelessly. After pairing, the switches on the wireless remote switch have the same functions as those on the flashlight. The pairing is preset in the factory. The wireless remote switch is powered by 1 x 3V CR1632 button cell battery which enables approx. 4000 presses. The standby time is approx. 12 months for a new battery. The maximum signal range between the flashlight and the wireless remote switch is 1m line of sight.
To replace the button cell battery, remove the battery cap of the wireless remote switch with a fingernail or a key.
The MH40S can disconnect pairing with the remote switch and will then cease to work. This error state is indicated by the MH40S flashing dimly. Re-pair the wireless remote switch with the flashlight by following these steps: Switch off the MH40S and remove the tailcap. Replace and tighten the tailcap. Hold the front mode switch while then also switching on the back switch. Continue to hold for 5-7 seconds until the main LED starts flashing. The MH40S main LED should now flash dimly to indicate ready to pair status. On the remote switch, press both Switch A and Switch B simultaneously for a few seconds until the flashlight turns on. Operation is complete.
When the flashlight is off, the power indicator beneath the front mode switch will flash every 5 seconds to indicate that the wireless remote switch has been paired with the flashlight.
If there is no operation in 2 hours, the wireless remote switch will automatically disengage from the flashlight.
Make sure the distance between the flashlight and the wireless remote switch is within 1m during the pairing process. Replace or recharge the batteries of the flashlight and remote switch if low. Changing batteries should not remove the pairing between the flashlight and the wireless remote switch.
Only when the MH40S is turned on at the back switch can it be connected and controlled with the wireless remote switch.
When the light is off, full press Switch A
When the light is on, full press Switch A
With the light turned on, half press remote switch Switch A to cycle through the following brightness levels: LOW - MID - HIGH - TURBO.
When the light is on, press and hold Switch B to access turbo.Release to return to the previous status.
When the light is on, half press and hold Switch A to cycle through the special modes.
When the light is off, press the back switch while briefly holding the mode switch. The LED indicator beneath the mode switch will flash to show the remaining battery power. Once the flashing stops, the flashlight will turn on. Flashing 3 times indicates that the power is no less than 50%. Flashing 2 times indicates that the power is below 50%. Flashing 1 time indicates that the power is below 25%.
When the light is on and the remaining power is below 10%, the MH40S will vibrate every 10 seconds.
After unscrewing the battery cap, insert/remove the battery. Screw to tighten the tailcap. After battery insertion, the power indicator will flash to indicate the battery voltage.
Ensure the battery is inserted with the positive end towards the head. The product will not work if the battery is incorrectly inserted. When the product is kept in a backpack or left unused for a prolonged time, please remove the battery to prevent accidental activation or battery leakage. DO NOT submerge the light into any liquid when it is hot. Doing so may cause irreparable damage to the light due to the difference in air pressure inside and outside the tube.
Unless your flashlight charging unit is faulty, please make sure your batteries are charged (fitted positive end forward). Make sure the tail cap is 100% fastened, tight, and clean. Metal-to-metal contact must be achieved, and grime or sand particles might inhibit contact. Do not use an entry-level USB adapter as that will cause charging malfunction. Use the 220V USB adapter that came with the light or another high-amperage, high-quality 3Amp or more USB adapter. If the main light keeps flashing, it is probably not paired to the wireless remote switch, or the remote switch has a flat battery (CR1632). Pair the switch and light again.
`
},
//*******************************************************************************************
{ Name: 'CI7',
Context:`
Ci7
Light; Flashlight; Infra Red; NVG Night Vision
NiteCore
InfraRed flashlight
Ci7, 1 x 18650 NL1835HP 3500mAh battery, Nylon material carry pouch, Lanyard, Spare O-ring
Aero grade aluminium alloy HA III military grade hard-anodized finish
Tactical tailcap on/off switch and tactical tailcap mode switch
This light is primarily an infrared light for NVG, but the white component also makes the light suitable for tactical use.
It does have a tactical tailcap switch and can be rifle mounted.
Momentary-on.
Memory.
207g
149mm
26mm
40mm
330g
170mm
100mm
45mm
LED_WHITE: 4 x CREE XP-G3 S3 LEDs for a maximum output of 2500 lumens, LED_IR: 4 x SST-10-IR LEDs with a wavelength of 940 nm
No integrated charger, requires external charger
1m limited falls
Rainproof, do not submerge.
Wide-angle flood beam due to 4 LEDs and 4 small reflectors
4 x small PDOT reflector for combination LEDs
1 x Nitecore 18650 NL1865HP 3500mAh battery
1 x 18650 battery with output > 8A, 2 x CR123 for emergency use, 2 x RCR123 for emergency use
1 year on battery, 2 year component replacement on unit, component replacement year 3-5 at partial cost to client. (see definition)
Filters 40mm, Extra batteries, External battery charger such as UI2, UMS4, Gun mounts such as GM02, GM02MH, GM01, NTR10
Strobe, IR
2500 Lumens, IR 7W
2500 Lumens
White 1100 lumens, IR 7W
White 320 lumens, IR 3W
White 90 lumens, IR 1W
8 lumens
https://nitecoresa.co.za/downloads/flyers/NiteCore_CI7.pdf
https://nitecoresa.co.za/product/CI7/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/CI7.pdf
https://www.youtube.com/watch?v=efA4DW-sqM4
High lumens, small form factor
IR component makes this light more expensive
Remove battery and charge in external charger
With the light switched off, look into the reflector.
Pull the head, rotate to reveal an alternate set of LEDs.
Not visible to the human eye.
Make sure the back tailcap on/off switch is off when not in use.
With the light switched off, press the tailcap on/off switch until a click is heard.
Light will switch on previous memory.
With the light switched on, press the tailcap on/off switch until a click is heard.
With the light switched on, press the tailcap modes switch to cycle.
With the light in the off position, loosen the back tailcap.
Hold the back Mode switch while retightening the back tailcap.
LED flashes will confirm mode: 1 flash = Daily mode, 2 flashes = Tactical mode.
Default setting.
In this user mode, there are 5 brightness levels Turbo, High, Mid, Low, and Ultralow.
The Ci7 will switch on the last memory brightness when reactivated unless the memory function contains daily mode strobe on.
When the light is on, short press the back tailcap modes switch to cycle through the following brightness levels: Ultralow, Low, Mid, High.
When the light is on in Daily mode, triple press the back tailcap modes switch.
The light will retain strobe in memory unless back tailcap modes switch is used to change brightness.
When the light is on, press and hold the tailcap modes switch to access the turbo level (3000 lumens).
Release to return to the previous status.
In this user mode, there are only 4 brightness levels Turbo, Mid, Low, and Ultralow.
The Ci7 will always switch on turbo when reactivated unless memory function contains tactical mode strobe on.
When the light is on, short press the tailcap modes switch to cycle through the following brightness levels: Turbo, Mid, Low, Ultralow.
When the light is on, triple press tailcap modes switch.
The light will retain strobe in memory unless the tailcap modes switch is used to change brightness.
When the light is on, long press back the tailcap modes switch.
The light will NOT retain strobe in memory.
When the battery is inserted, using battery flash voltage indicator.
When disconnected from the power source after the charging process, using battery flash voltage indicator.
When the light is on, represent the corresponding remaining battery power levels:
Being steadily turned on indicates that the power is above 50%
Flashing slowly indicates that the power is below 50%
Flashing quickly indicates that the power is below 10%
After unscrewing the battery cap, insert/remove the battery.
Screw to tighten the tailcap.
After battery insertion, the power indicator will flash to indicate the battery voltage.
Ensure the battery is inserted with the positive end towards the head.
The product will not work if the battery is incorrectly inserted.
When the product is kept in a backpack or left unused for a prolonged time, please remove the battery to prevent accidental activation or battery leakage.
DO NOT submerge the light into any liquid when it is hot.
Doing so may cause irreparable damage to the light due to the difference in air pressure inside and outside the tube.
Unless your CI7's charging unit is faulty, please make sure your batteries are charged and fitted positive forward.
The front and back of the flashlight must be 100% fastened to the shaft and must be clean.
If metal on metal contact is not achieved, your light may not work correctly.
Please disassemble and reassemble, removing the belt clip and tactical ring if fitted as these may prevent the tailcap from closing 100%.
Make sure the light head is not twisted and in Infrared Mode, as your eyes won't see the light and it will seem to be broken.
How far does the IR shine, what is the beam range of the infrared.
The IR and white light have a fairly flooded beam profile due to the multiple LEDs.
Therefore, this light is not a beam thrower and will not produce a far-reaching beam.
We also need to consider ambient light as well as the quality of the NVG.
Let's make a rough estimate and say 100m.
`
},
//*******************************************************************************************
{ Name: 'EF1',
Context:`
EF1
178A
Light; Flashlight; Intrinsically safe, Explosion proof, Industrial;
NiteCore
Intrinsically safe Explosion proof Industrial use flashlight for flammable environments
EF1, 1 x 18650 NL1835 3500mAh battery, Nylon material carry pouch, Lanyard, Spare O-ring, UI1 charger
Aero grade aluminium alloy HA III military grade hard-anodized finish
Industrial hazardous use, explosion proof intrinsically safe ATEX rated and certified
Not meant for tactical use outside of industrial explosion proof environment
4 stage side slide switch
295g
155mm
32mm
40mm
405g
190mm
110mm
70mm
CREE XM-L2 U3 LED for a maximum output of 830 lumens
No integrated charger, use external charger
1m limited falls
Yes, 2m
Combination medium spot and flood
1 x small PDOT
1 x Nitecore 18650 NL1836
1 x Nitecore 18650 NL1835 -NL1836 -NL1835R
1 year on battery, 2 year component replacement on unit, component replacement year 3-5 at partial cost to client. (see definition)
Extra batteries
None
830 lumens
270m
830 lumens
320 lumens
4 lumens
270m
18300cd
White 1h45
White 3h00
White 150h
https://nitecoresa.co.za/downloads/flyers/NiteCore_EF1.pdf
https://nitecoresa.co.za/product/EF1/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/EF1.pdf
Rugged body construction, intrinsically safe ATEX rated
Expensive
Remove battery and charge in external charger
Slide side switch to required brightness at position 1, 2, or 3
Slide side switch to position 0
Slide side switch to required brightness at position 1, 2, or 3
Rigid double layer tube design.
EF1 explosion-proof LED flashlight.
It is suitable for various flammable and explosive sites and underwater operations.
With flameproof enclosure and the highest explosion-proof grade, it can be used in various flammable and explosive places for a long time.
The shell is made of imported high hardness alloy, with excellent performance of strike resistance and impact resistance.
It is small, light and easy to carry.
Various carrying styles are available, such as held by hand, carried by shoulder, etc.
Ambient temperatures -20°C ≤ Ta ≤ +40°C
Do not open the product when an explosive atmosphere is present.
The head has been tightened in the factory with a special tool whose tightening torque is 150 N·m.
Disassembly tool is not provided, thus users cannot open the head.
Explosion-proof Certificate No.: LCIE 16 ATEX 3006
GB 3836.1-2010 Explosive atmospheres-Part 1: Equipment-General requirements
GB 3836.2-2010 Explosive atmospheres-Part 2: Equipment protection by flame-proof enclosure.
IEC 60079-0:2011 Explosive atmospheres-Part 0: Equipment-General requirements
IEC 60079-1:2011 Explosive atmospheres-Part 1: Equipment protection by flame-proof enclosure.
EN 60079-0:2012 Explosive atmospheres-Part 0: Equipment-General requirements
After unscrewing the battery cap, insert/remove the battery.
Screw to tighten the tailcap.
After battery insertion, the power indicator will flash to indicate the battery voltage.
`
},
//*******************************************************************************************
{ Name: 'P30I',
Context:`
P30i
Light; Flashlight; Beam Thrower;
NiteCore
2000 Lumens 1000m Value for money medium size beam thrower
P30i, 21700 NL2150HPi 5000mAh battery, pressure switch RSW2i (cable part), USB-C charging cable, CR123 battery magazine, spare O-ring, nylon material holster, clip
Aero grade aluminum alloy HA III military grade hard-anodized finish
Although larger than a conventional tactical light, it can still be used as a semi tactical light.
Tactical tailcap switch with momentary-on and memory function.
Rifle mountable with GM02, GM02MH, or GM01.
High brightness scene lighting and ultra blinding effect with long beam range.
Note thought that it is Slightly large and cumbersome for pistol shooting and belt carry and also uses a Side switch for mode changes.
Tactical tailcap switch for on and off and side switch for modes
370g
180mm
25.4mm
65mm
660g
250mm
100mm
85mm
2000 lumens CREE XHP35 HI LED
1m limited falls onto soft surface.
Expect physical damage for falls onto concrete.
Rainproof, do not submerge.
Medium-angle flood beam plus concentrated spot beam
1 large 65mm PDOT reflector for optimum range output
1 x 21700 NL2150HPi, NL2153HPi battery or newer from the Nitecore HPi range
Compatible with NITECORE 21700 i Series batteries with an output over 15A and CR123/RCR123 batteries.
Not suitable for charging CR123/RCR123 batteries.
Not compatible with conventional 21700 batteries
USB Type-C cable plugged into tailcap on flashlight.
Needs adequate USB 2A or higher output to charge properly.
SOS, beacon, Strobe is only possible using the RSW2i pressure switch
5 brightness levels - Turbo, High, Mid, Low, Ultralow
2000 lumens and due to the larger head size heat dissipation is improved and ATR is delayed
30min
1000m
250000cd
1000 lumens
1h 30min
722m
130500cd
385 lumens
4h
447m
50000cd
85 lumens
18h
209m
11000cd
6 lumens
100h
40m
400cd
Filters 65mm, extra NL2150HPi, NL2153HPI battery, external 21700 battery charger such as UI1, UI2, UMS4, and gunmount GM02, GM02MH, GM01
1 year on battery, 2 year component replacement on unit, component replacement year 3-5 at partial cost to client. (See definition)
Medium size high portability for hand carry and exceptional beam range for size category.
Relative low cost for performance.
Short form factor.
Large head
https://nitecoresa.co.za/downloads/flyers/NiteCore_P30I.pdf
https://nitecoresa.co.za/product/p30i/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/p30i.pdf
https://www.youtube.com/watch?v=ZwCz77czqvs
Ensure the battery is inserted with the positive end towards the head.
The product will not work if the battery is incorrectly inserted.
The P30i is equipped with an intelligent charging system.
After inserting the battery and tightening the tailcap, connect the USB-C cable.
During the charging the tail power indicator will flash slowly.
When the battery is fully charged, charging will stop and the tail power indicator will stay turned on.
When the charging status is abnormal (e.g. the battery is broken/inserted incorrectly), the P30i will cease charging and the tail power indicator will flash quickly.
The charging time for a 21700 Li-ion battery (5000mAh) is approx. 4 hours (charged via the 5V/2A adapter).
With the light turned off, press the tailcap switch until a click is heard.
With the light turned on, press the tailcap switch until a click is heard
With the light turned on, short press the front mode switch to cycle through the following brightness levels: Ultralow, Low, Mid, High, Turbo.
This access has memory function.
When reactivated, the flashlight will automatically access the previous memorized brightness level.
With the light turned off, press and hold the front mode switch to access turbo momentarily.
Release to turn it off.
With the light turned on, press and hold the front mode switch to access turbo directly.
Short press the mode switch to return to the previous brightness level, or it will automatically return to the previous brightness level if there is no operation in 30 seconds.
With the light turned off, quickly triple press the front mode switch to access the beacon mode.
Short press the mode switch to turn off the light.
When the light is in beacon mode, long press the mode switch to cycle between SOS and beacon.
Short press the mode switch to turn off the light.
Strobe is only possible using the RSW2i pressure switch.
Plug in the cable part of the RSW2i to the USB port and clip to fasten the cable on the tailcap.
When the light is off, short press switch A to turn it on.
When the light is on, short press switch A to turn it off.
When the light is on, short press switch B to cycle through the brightness levels.
When the light is on, long press switch B to access turbo directly.
Short press switch B to return to the previous brightness level, or it will automatically return to the previous brightness level if there is no operation in 30 seconds.
When the light is off, press and hold switch A to access the strobe mode.
Release to return it off.
When the light is on, long press switch A to access the strobe mode.
Short press switch B to return to the previous status, or short press switch A to turn off the light.
When battery inserted using the battery flash voltage indicator.
When charging is disconnected using the battery flash voltage indicator
When the light is on, the head power indicator will indicate the remaining battery power.
Being steadily turned on indicates that the power is above 50%
Flashing slowly indicates that the power is below 50%
Flashing quickly indicates that the power is below 10%
When using two CR123/RCR123 in series, the indicator will show the average voltage between the two batteries
The batteries should be replaced or recharged when the output appears to be dim or the flashlight becomes unresponsive due to low power
Unless there is a charging issue, make sure your battery is fully charged and fitted positive forward.
For charging issues, you may also try using another USB cable and USB port to eliminate faulty cabling.
Make sure to use a quality USB port if 2A or higher.
Don't charge from a PC as it can go into sleep mode.
When charging, the blue indicator light should:
A: Be OFF if no charging cable is plugged in or no power is reaching the charging port.
B: Blink slowly for charging in progress.
C: Remain ON if fully charged.
D: Blink rapidly to indicate a charging error.
The back tailcap of the flashlight must be 100% fastened to the shaft and must be clean.
If metal-on-metal contact is not achieved, your light may not work correctly.
Disassemble the tailcap and reassemble using enough torque, Please make sure as this is a common error.
It is normal and unavoidable for the light to become HOT during use, especially in TURBO Mode.
`
},
//*******************************************************************************************
{ Name: 'DL20',
Context:`
DL20
Light; Flashlight; Diving; SCUBA
NiteCore
DL20 Diving flashlight Light with white and red
DL20, 1 x 18650 NL1835R 3500mAh battery, Nylon material carry pouch, Lanyard, Spare O-ring,
Aero grade aluminium alloy HA III military grade hard-anodized finish
1 side switch for white and 1 side switch for red
165g
135mm
25mm
40mm
265g
220mm
100mm
35mm
LED_WHITE: 1 x CREE XP-L HIv3 LED for a maximum output of 1000 lumens
LED_RED: 1 x LED for a maximum output of 115 lumens
No integrated charger, bundled with battery with battery charge port or needs external charger such as UI1 or UI2
1m limited falls
Can be submerged 100m.
Medium wide and medium spot
1 x Nitecore 18650 NL1835R 3500mAh battery
Other 18650 batteries with charger
1 year unit replacement with no support after 1 years<2Y (see definition)
-Extra batteries
-External battery charger
Red
1000 lumens
White 1000 lumens, Red 55 Lumens
White 385 lumens, 55 Lumens Red
223m
223m
12400cd
5500cd
White 1h, Red 4h
White 4h, Red 9h
https://nitecoresa.co.za/downloads/flyers/NiteCore_DL20.pdf
https://nitecoresa.co.za/product/Dl20/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/DL20.pdf
https://www.youtube.com/watch?v=Twb0NVwSp-4
100m submersible general purpose white and red light
More expensive
Charge directly on the battery using the USB cable or remove the battery and charge in an external charger
With the light switched off, hold the first front switch
With the light switched on, hold the first front switch
With the light switched on, tap the first front switch
With the light switched off, hold the second front switch
With the light switched on, hold the second front switch
With the light switched on, tap the second front switch
After unscrewing the battery cap, insert/remove the battery.
Screw to tighten the tailcap, the power indicator will flash to indicate the battery voltage.
1. Ensure the battery is inserted with the positive end towards the head. The product will not work if the battery is incorrectly inserted.
2. When the product is kept in a backpack or left unused for a prolonged time, please remove the battery to prevent accidental activation or battery leakage.
`
},
//*******************************************************************************************
{ Name: 'P23I',
Context:`
P23I
Light; Flashlight;Tactical
NiteCore
3000 Lumens, small to medium size, high end tactical and multi purpose flashlight.
P23i, 21700 NL2150HPi 5000mAh battery, USB-C charging cable, spare O-ring, nylon material holster, clip
High
Constructed from aerospace grade aluminum alloy HA III military grade hard-anodized finish
Tactical tailcap on/off switch and tactical tailcap mode switch
Compact size.
Tactical tailcap switch.
Operate firearm or other tools with the strong hand while controlling the light with the weak hand thumb.
Momentary-on.
Memory function.
Utility belt mountable using NTH20 holster.
Dual tailcap switch for on/off and modes change to cycle through output levels and access special modes like strobe or moonlight
Small handheld portable, comfortable tactical carry.
Easy use with pistol shooting.
High performance scene lighting due to high lumens and beam profile.
High factor blinding effect.
Glass breaker front bezel.
Light will automatically switch on turbo in tactical mode.
Rugged construction and reliable performance.
Ideal choice for law enforcement, military, and security professionals who require a dependable illumination tool in high-stress situations.
Can switch to spare batteries rapidly.
190g
143.5mm
28.5mm
31.8mm
335g
180mm
180mm
50mm
Luminus SFT-70 with max output of 3000 lumens
USB Type-C cable plugged into body on flashlight, recommend 5V/2A adapter or better
1m limited falls
Rainproof, do not submerge.
Medium-angle flood beam plus medium angle spot beam, ideal for tactical close and medium range use
NL2150HPi, NL2153HPi battery
NiteCore I series 21700
NOT compatible with conventional 21700/18650 batteries and CR123/RCR123 batteries
1 year on battery, 2 year component replacement on unit, component replacement year 3-5 at partial cost to client. (see definition)
Filters 32mm, extra batteries, external battery charger such as UI1, UI2, UMS4; gun mounts such as GM02, GM02MH, GM01, RSW2i pressure switch, NTR10, traffic wand NTW32, NTH20 holster(recommended)
Strobe, beacon, SOS
3000 lumens, Note: ATR will initiate if temperature becomes too high and brightness will reduce.
470m
3000 lumens
1500 lumens
800 lumens
250 lumens
50 lumens
470m
330m
55300cd
27960cd
30min
2h30
4h
10h
45h
https://nitecoresa.co.za/downloads/flyers/NiteCore_P23I.pdf
https://nitecoresa.co.za/product/p23/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/p23i.pdf
https://www.youtube.com/watch?v=_89r_71auz8
Small size high performance all-round tactical and general purpose flashlight
Beam range outperformed by larger lights
Unscrew battery cap, insert battery and tighten the tailcap. The power indicator will flash to indicate the battery voltage.
When the product is kept in a backpack or left unused for a prolonged time, please remove the battery to prevent accidental activation or battery leakage.
DO NOT submerge at any time or to cool it down.
Insert battery, tighten tailcap and insert USB charge cable. Use 2Amp or higher USB wall adapter.
During charging, the power indicator will flash slowly. When the battery is full, charging will cease and the power indicator will remain constant on.
When the light is on, connecting to a power source will automatically turn the light off.
The flashlight will automatically access a low brightness level when it is disconnected from charge.
The charging time for a 21700 Li-ion battery (5000mAh) is approx. 4 hours (charged via the 5V/2A adapter).
With the light turned off, press the tailcap switch until a click is heard
With the light turned on, press the tailcap switch until a click is heard
Switch between daily and tactical mode:
Ensure the tailcap is fully tightened.
Keep holding the mode switch on the tailcap and the flashlight will access the turbo level or strobe mode while simultaneously loosening the tailcap.
Once the tailcap has been loosened, the primary white LED will indicate a user mode selected by flashing once for daily mode and flashing twice for tactical mode.
Release the mode switch and tighten the tailcap.
In tactical mode, there are only 4 brightness levels Turbo, Mid, Low, and Ultralow. The P23i will always switch on turbo when reactivated unless memory function contains tactical mode strobe on.
In tactical mode, When the light is on, short press the flat back mode switch to cycle through the following brightness levels: Turbo,Mid,Low,Ultralow.
In tactical mode, When the light is on, triple press back mode switch. The light will retain strobe in memory unless mode switch is used to change brightness.
In tactical mode, When the light is on, long press back mode switch. The light will NOT retain strobe in memory.
Default setting. In this user mode, there are 5 brightness levels Turbo, High, Mid, Low, and Ultralow. The P23i will switch on last memory brightness when reactivated unless memory function contains daily mode strobe on.
In daily mode, when the light is on, short press the mode switch to cycle through the following brightness levels: Ultralow - Low - Mid - High.
In daily mode, when the light is on, triple press back mode switch. The light will retain strobe in memory unless mode switch is used to change brightness.
In daily mode, When the light is on, press and hold the mode switch to access the turbo level (3000 lumens). Release to return to the previous status.
The battery flash voltage indicator will activate when the battery is inserted and when disconnected from charging
Constant on indicates that the power is above 50%.
Flashing slowly indicates that the power is below 50%.
When the light is on, Flashing quickly indicates that the power is below 10%.
Ensure the battery is inserted positive forward. The product will not work if the battery is incorrectly inserted.
The tailcap must be clean and tight.
Make sure the battery is charged with a reliable cable and 2A or higher USB port.
Make sure you are using a recommended battery such as the NL2150HPi or NL2153HPi i series.
`
},
//*******************************************************************************************
{ Name: 'EDC27',
Context:`
EDC27
Light; Flashlight; EDC, tactical, pocket
NiteCore
Flat shaped high intensity EDC pocket tactical flashlight
EDC27, Integrated 1700mAh battery, USB-C charging cable, Lanyard
High-strength stainless steel body with PVD (Physical Vapor Deposition) titanium coating
Dual tactical back switches for on/off and modes
125g
135.6mm
31.4mm
20.7mm
189g
170mm
70mm
45mm
2 x Luminus SST40 LEDs with a max output of 3000 lumens
USB-C cable plugged into the side of the flashlight
1m limited falls
Rainproof, do not submerge.
Wide-angle flood beam
2 small reflectors for a wide-angle flood
Integrated 1700mAh non-removable non-replaceable
NONE
Internal only
2 year unit replacement with no support after 2 years
None
Strobe
3000 lumens. Countdown timer will reduce output after a few seconds to prevent overheating.
3000 lumens, Countdown timer will reduce output after a few seconds to prevent overheating.
1000 lumens
200 lumens
65 lumens
15 lumens
220m
220m
130m
12200cd
4340cd
Not specified as turbo is momentary and ATR and timer will initiate
White 1h45
White 3h45
White 11h
White 37h
https://nitecoresa.co.za/downloads/flyers/NiteCore_EDC27.pdf
https://nitecoresa.co.za/product/EDC27/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/EDC27.pdf
https://www.youtube.com/watch?v=vKjeUKOSiqk
Small, easy to carry in pants, very bright, sturdy belt clip
Non-replaceable batteries, shorter warranty than larger units
OLED screen display.
Sealed unit, not replaceable.
Connect The USB-C cable to USB adapter and the light to begin the charging process.
The charging time is approx. 1 hour 15 minutes charged via the 5V/2A adapter, progress is displayed on the OLED display.
With the light turned off and unlocked, tap full-press the tall back power switch to access the last memory function brightness.
With the light turned on, tap full-press the tall back power switch.
With the light turned on, tap half-press the tall back power switch to cycle brightness levels
With light off or in locked mode 1, half-press and hold the flat back modes switch
With light on or off or in locked mode 1, full-press and hold the flat back modes switch
With the light off and unlocked, half-press and hold the tall back power switch
With flashlight off and unlocked, quickly press the tall back power switch and release.
Then quickly press again and hold until the lock 1 icon appears. Hold longer until the lock 2 icon appears.
With flashlight on, press and hold the tall back power switch until the lock 1 icon appears.
Hold longer until the lock 2 icon appears.
With flashlight off and locked, quickly press the tall back power switch and release, then quickly press again and hold until unlocked.
The tall back power switch is prevented from activating the flashlight
Half-press and hold the flat back modes switch
Full-press and hold the flat back modes switch
All modes disabled, follow unlock procedure.
When the light is turned on, the screen will successively show the current info (brightness level & lumens, runtime remaining) before it goes off.
After the screen goes off, half-pressing the tall back power switch can reactivate the screen.
When the built-in optical sensor detects an obstruction ahead after the high level, turbo level, or strobe mode is on, the brightness will automatically lower to the low level (65 lumens) to avoid overheating and prolong battery life.
The sensitivity of the sensor may vary due to different colors and materials of obstructions.
If needed, please readjust the brightness to return to the previous status.
Due to the small size and high output, the product will generate massive heat during prolonged operation.
It is recommended not to use high brightness levels for extended periods to prevent burns and product damage.
DO NOT cover or place objects near the head of the product, as this may cause damage to the product or accidents due to high temperatures.
DO NOT use the product to illuminate flammable or explosive materials, as the high heat may lead to combustion or explosion.
When the product is placed in an enclosed or flammable environment such as a pocket or backpack, or when it is left unused for an extended period, please activate full lockout mode to avoid accidental activation and dangers caused by excessive heat.
DO NOT expose the product to temperatures above 60°C (140°F) for prolonged time, as this poses a risk of battery explosion or combustion.
Light might go on in your pocket and burn you, use lockdown mode to avoid accidental activation.
Can I replace the battery
No, the battery is built in by the factory and is a non standard non replaceable form factor.
Unless your USB cable or USB adapter is faulty, please make sure your battery is charged.
You may also try using another USB cable and USB port to eliminate faulty cabling.
Don't charge from a PC as it can go into sleep mode.
Using lockout modes will help prevent unintended activation and hence burning when carrying the flashlight in your pocket or backpack.
If a lock and a 1 or a lock and a 2 is displayed, follow UNLOCK instruction to exit lockout mode.
`
},
//*******************************************************************************************
{ Name: 'NPL30',
Context:`
NPL30
Light; Pistol light
NiteCore
1200 lumen Pistol mountable Light.
NPL30, 2 x CR123A batteries.
Aero grade aluminum alloy HA III military grade hard-anodized finish.
Ambidextrous high brightness scene lighting with momentary on fitted to pistol rail. Easy simple operation. Works with rechargeable and non rechargeable CR123. Requires custom holster for firearm when light is fitted though.
Tactical tailcap switch for on/off and modes.
125g
81.5mm
37mm
36mm
4 x CREE XP-G3 LEDs with a max output of 1200 lumens.
1m, limited falls.
Rainproof, do not submerge.
Wide-angle flood beam.
4 small reflectors for a wide-angle flood.
2 x CR123 or 2 x rechargeable RCR123.
2 x Nitecore NL166 RCR123.
External charger needed for RCR123 batteries such as UI2 or UMS4.
Strobe
1200 lumens
1-2 hours
113m
3300cd
3300cd
Nitecore NL166 RCR123 and UI2 charger
1 year on battery, 2 year component replacement on unit, component replacement year 3-5 at partial cost to client.
Not suitable for general purpose.
Pistol mounted light.
https://nitecoresa.co.za/downloads/flyers/NiteCore_NPL30.pdf
https://nitecoresa.co.za/product/NPL30/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/NPL30.pdf
https://www.youtube.com/watch?v=vAv-EBX8KSw
Lift the cap or press the screw on the back to open the battery compartment.
Insert the batteries according to the polarity labels and click to close the battery compartment.
DO NOT loosen the screw on the back as the battery compartment will not be closed properly.
Unscrew the mounting screw counterclockwise.
Align the stopper with the recoil groove of the rail.
Tighten the screw clockwise.
Press and hold either power switch to turn on the light momentarily.
Release to turn it off.
When the light is off, short press either power switch to turn it on.
When the light is on, short press either power switch to turn it off.
When the light is on/off, triple press either power switch to access the strobe mode.
When the strobe mode is on, short press either power switch to turn off the light.
`
},
{ Name: 'NPL25',
Context:`
NPL25
Light; Compact Tactical Pistol Light
NiteCore
900 lumen ultra-compact tactical light, optimized for mid-to-long range targeting.
NPL25, Magnetic USB-C charging cable, PLB500 500mAh Li-ion battery.
Aero-grade aluminum alloy HA III military grade hard-anodized finish.
Quick release battery, rail stopper, recoil-proof, tail-end dual button operation. Advanced Temperature Regulation module.
Dual button tailcap switch for on/off and modes.
66g
56mm
33mm
32mm
UHi 20 LED with a max output of 900 lumens.
1m
Rainproof, do not submerge.
High-intensity beam with a throw of 255 meters.
Optical system with crystal coating and Precision Digital Optics Technology.
Li-ion battery with magnetic charging function.
Magnetic USB-C charging cable.
PLB500 500mAh Li-ion battery with magnetic USB-C charging function.
High efficiency constant current circuit for stable output.
900 lumens
35 minutes
255m
16000cd
Magnetic charging cable, additional Li-ion battery
1 year on battery and 2 year unit replacement with no additional support after 2 years.
Highly portable and powerful for tactical use and pistol mountable.
Short runtime on high output level.
https://nitecoresa.co.za/downloads/flyers/NiteCore_NPL25.pdf
https://nitecoresa.co.za/product/NPL25/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/npl25.pdf
https://www.youtube.com/watch?v=zUj5VzSdYD0
Align and insert the Li-ion battery according to polarity, secure via magnetic charging end.
Press and hold either power switch for momentary illumination, release to turn off.
Press power switch to toggle on/off.
Unscrew the mounting screw counterclockwise.
Slide the light onto the firearm's rail until it clicks into place or is fully seated.
Align the light with the desired position on the rail.
Tighten the mounting screw clockwise to secure the light in place.
Ensure the light is firmly attached and stable before use.
locks securely with rail stopper.
When the light is on, quickly double or triple press the power switch to access the strobe mode.
When in strobe mode, press the power switch once to return to the previous mode or turn off the light.
Ensure firearm safety before installation. Follow local regulations for battery disposal. Avoid direct eye exposure to beam.
`
},
//*******************************************************************************************
{ Name: 'LR60',
Context:`
LR60
Light; Lantern; Camping
NiteCore
280 lumens General purpose Lantern with extended runtimes and high battery capacity
LR60, USB-C Charging Cable, Spare O-ring (for the diffuser), 18650/CR123 Battery Magazine x 2, 2 x 21700 NL2150 5000mAh Batteries
Body made from durable and fire-retardant PC materials
Multiple illuminable direction settings, magnetic base and hanger equipped for multiple environments.
Also acts as power bank.
Batteries can be removed.
High capacity battery storage.
291g
129mm
60mm
31mm
381g
220mm
110mm
35mm
Utilizes 9 x high CRI LEDs (CRI≥90, Color Temperature: 4000-4500K) with a max output of 280 lumens
1m onto soft surface
Rainproof, do not submerge.
Wide angle flood from highly translucent PC diffuser allowing all light sources to be well distributed
No reflector
1-2 x 21700 Li-ion batteries, NL2150, NL2150R (tight fit), NL2160
Compatible with 18650 and CR123 batteries.
Not compatible with flat top 21700 Li-ion or 21700 i Series Batteries.
Integrated intelligent USB charging and discharging management system. USB-C input port with QC fast charge.
Beacon, SOS
3 brightness levels - High, Mid, Low
16h
32h
150h
280
75
6
280
280
28m
14m
4m
54cd
15cd
1cd
11h
22h
100h
280
75
6
280
280
28m
14m
4m
54cd
15cd
1cd
1 year on battery, 2 year component replacement on unit, component replacement year 3-5 at partial cost to client. (see definition)
IP66
Press and hold both the diffuser clamps located on both sides of the LR60, and pull up to remove the diffuser.
Insert the batteries according to the polarity marks on the slots.
Put back the diffuser until a click is heard to indicate that the diffuser is fully clamped.
When the light is off, press and hold both switches until the LOW level is accessed.
When the light is on, short press both switches to turn it off.
When the light is on, short press either switch to cycle through the following brightness levels: MID, HIGH, LOW.
The LR60 has 3 illuminable directions available (top and both sides) for different needs according to the surroundings.
When the light is on, press and hold either switch to cycle through the following direction settings: TOP, ONE SIDE, TOP+ONE SIDE, ALL.
Release to select the current direction setting.
(This function has mode memory. When reactivated, the LR60 will automatically access the LOW level of the previous memorized direction setting.)
When the light is off, press and hold both switches to cycle through the following modes: LOW, BEACON, SOS.
Release to select the current mode.
Turning off the light will exit special modes.
With this function turned on, the blue indicator located at the top of the product will flash once every 2 seconds to indicate the location of the LR60.
When the light is on, press and hold both switches for over 2 seconds to turn off the light and access Location Indication.
With 2 x 21700 Li-ion batteries, the standby time is approx. 6 months with Location Indication turned on and approx. 12 months with this function turned off.
Reactivating the LR60 will turn off this function.
When the battery is inserted, the blue indicator will flash to show the battery voltage (±0.1V).
Different voltages represent the corresponding remaining battery power levels.
When the light is off, short press either switch and the power indicator will flash to indicate the remaining power of the batteries:
Flashing three times indicates that the power is above 50%.
Flashing twice indicates that the power is below 50%.
Flashing once indicates that the power is below 10%.
The LR60 is equipped with USB output to charge an external USB device as a power bank.
Connect to an external USB device via the USB charging cable through the USB output port to begin charging.
Output: 5V⎓3000A / 9V⎓2000A / 12V⎓1500A.
During the output process, the blue indicator will turn on constantly.
The light of the LR60 will automatically turn off when the USB output power reaches too high with the light on.
Connect the LR60 to a USB charging device via the USB-C. During the charging process, the blue indicator will flash slowly. When the charging process is complete, the blue indicator will stay on. The charging time for 2 x 21700 Li-ion batteries (5000mAh) with fast charge is approx. 4.5 hours. Note: The light of the LR60 is still able to turn on during the USB input process. (HIGH level excluded)
The LR60 is capable of activating over-discharged Li-ion batteries with a protective circuit.
After the battery insertion, the LR60 will test and activate the batteries when necessary.
The LR60 is limited to charging switch-topped 21700 Li-ion rechargeable batteries or 18650 in battery magazines only.
DO NOT mix batteries of different types, power levels, brands or models.
Ensure the battery(s) is/are inserted according to the polarity marks in the battery slots.
The product is restricted to charging switch-topped 21700 Li-ion rechargeable batteries or 18650 in battery magazines only.
DO NOT use it with other types of batteries as this could result in battery explosion, cracking or leaking, causing property damage and/or personal injury.
Moderate heat from this product is to be expected during the charging/discharging process, which is normal.
Please DO NOT charge unprotected over-discharged Li-ion batteries, or it will result in fire or even battery explosions.
Unless your USB cable or USB adapter is faulty, please make sure your battery is charged.
You may also try using another USB cable and USB port to eliminate faulty cabling.
Don't charge from a PC as it can go into sleep mode.
Make sure to hold both side buttons to switch the unit on.
Make sure your batteries are inserted the right way around.
`
},
//*******************************************************************************************
{ Name: 'GEM10UV',
Context:`
GEM10UV
Light, UV Light, Gemstone Identification, scorpion light
NiteCore
small form factor ultra violet 365nm UV light.
GEM10UV, Spare O-rings, Lanyard, Holster.
Aero-grade aluminum alloy with HAIII military-grade hard-anodized finish.
NONE
Rotary switch for infinite variable UV brightness adjustment.
114g
16mm
21.5mm
135mm
195g
210mm
100mm
300mm
UV LED with 3000mW output, 365nm wavelength.
1m, limited falls.
Rainproof, do not submerge.
UV medium flood beam.
"Crystal Coating Technology" combined with "Precision Digital Optics Technology" reflector.
1x18650 rechargeable Li-ion NL1835 NL1836 NL1835R
2xRCR123 rechargeable Li-ion
The bundled NL1835R battery has an onboard USB charging port.
UV
Infinite brightness adjustment from UV(Ultralow) to UV(Turbo).
3000mW
4h15
5mW
500h
Extra Batteries or extra battery external chargers such as UI1, UI2, UMS4.
None
Precision-focused 365nm UV light optimized for gemstone fluorescence analysis and general-purpose UV.
Can detect scorpions or scorpion parts up to 8m in the dark.
Illuminate a wide variety of UV-reflective surfaces.
Not suitable as a general-purpose flashlight due to UV output.
Need UV reflective surfaces and a dark environment to function.
https://nitecoresa.co.za/downloads/flyers/NiteCore_GEM10UV.pdf
https://nitecoresa.co.za/product/gem10uv/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/gem10uv.pdf
https://www.youtube.com/watch?v=qhmiXMGDRaU
1 year on battery, 2 year component replacement on unit, component replacement year 3-5 at partial cost to client. (see definition)
Insert battery positive end first.
Light will not operate if the battery is reversed.
Avoid direct eye exposure.
UV into the eye is dangerous.
Remove batteries when stored in a backpack or not used for extended periods to prevent accidental activation or battery leakage.
To switch ON: Rotate the switch clockwise until a "click" sound is heard.
To switch OFF: Rotate the switch counter-clockwise until a "click" sound is heard.
UV brightness is infinitely variable from UV(Ultralow) to UV(Turbo).
When the light is on, rotate the switch clockwise to increase brightness from 5mW to 3000mW.
Brightness is adjusted in reverse by rotating the switch counter-clockwise.
Light regulates output and adapts to the ambient environment to maintain optimal performance.
`
},
//*******************************************************************************************
{ Name: 'P30',
Context:`
P30
Light, Flashlight, Tactical
NiteCore
1000 lumen small form factor tactical flashlight with precision long-distance beam.
P30, Holster, NL2150R USB-C battery, Lanyard, Spare O-ring, Tactical Ring, Belt Clip
Aero grade aluminum alloy
Tactical tail switch with momentary-on and memory.
Dedicated strobe mode.
Compatible with optional pressure switch and gun mount for weapon mounting.
Non tactical Side switch for modes change.
Small form factor and intense beam.
Slightly large for pocket carry but material belt holster included.
Dual-switch control. Tactical tail switch for on/off and mode memory. Side mode switch for brightness and special modes.
141g
160mm
40mm
25.4mm
220g
240mm
110mm
53mm
CREE XP-L HI V3 LED
1m
Rainproof, do not submerge.
Long-range precision beam
Smooth reflector optimized for throw
NL2150R USB-C rechargeable battery, NL2150RX USB-C rechargeable powerbank battery, 1x18650 rechargeable Li-ion, 2xCR123A Lithium primaries (for maximum output)
1x18650/2xCR123 magazine/21700 Nitecore battery
External charger needed, no charge port on light itself.
Strobe, SOS, Beacon
Ultralow, Low, Mid, High, Turbo
1 lumen
1480h
70 lumens
28h
240 lumens
8h30min
550 lumens
3h15min
1000 lumens
1h15min
1000 lumens
1000 lumens
1000 lumens
618m
95600cd
RSW3 Pressure Switch, GM02 Gun Mount, Extra Batteries, 50mm Filters NFR50
RSW3 Pressure Switch, GM02 Gun Mount
Precision long-range beam can reach out to 600m (depleted) for search and outdoor use.
Mode memory and instant turbo from off enable quick access to desired output.
Relatively large size and narrow beam profile less suitable for up-close 2m illumination needs. Separate charger required.
https://nitecoresa.co.za/downloads/flyers/NiteCore_P30.pdf
https://nitecoresa.co.za/product/p30/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/p30.pdf
https://www.youtube.com/watch?v=V4hbb0Swt_4
1 year on battery, 2 year component replacement on unit, component replacement year 3-5 at partial cost to client. (see definition)
The power indicator can display the battery voltage (±0.1V).
Unscrew back battery cap and insert battery.
Ensure positive end of battery towards the head.
Use battery magazine for 1x18650 / 2xCR123 to prevent rattling and ensure stable contact.
Screw back battery cap tightly.
With the light turned off, press the tailcap switch until a click is heard.
With the light turned on, press the tailcap switch until a click is heard.
With light turned on, short press the front mode switch to cycle: Ultralow, Low, Mid, High, Turbo.
The last brightness will be retained in the memory function.
With the light turned on, long press the front mode switch, strobe will be retained in the memory function.
Short press front switch to exit special modes.
With the light turned on and in strobe, long press front mode switch, SOS will be retained in the memory function.
Short press front switch to exit special modes.
With the light turned on and in SOS, long press front mode switch, beacon will be retained in the memory function.
Short press front switch to exit special modes.
With the light turned off, click tail switch while holding front mode switch.
The blue power LED under front mode switch will flash the battery voltage as follows: Flash x 1V, pause, flash x 0.1V.
For example: 3 pause 7 is 3.7V and 4 pause 1 is 4.1V.
Common voltage ranges are as follows:
4.8V (low)
6.4V (full)
3.5V (low)
4.2V (full)
Remove the tailcap and attach RSW3 pressure switch.
Use the switch on the pressure switch front to switch light on and off or use pressure pad at the back for momentary on/off.
Unless there is a charging problem, make sure your battery is fully charged and fitted positive forward in the flashlight.
The battery is charged by removing the battery and plugging the USB type C cable into the battery directly.
Red light on the battery means charging, green light means full.
For charging issues, you may also try using another USB cable and USB port to eliminate faulty cabling.
Don't charge from a PC as it can go into sleep mode.
The back tailcap of the flashlight must be 100% fastened to the shaft and must be clean.
If metal-on-metal contact is not achieved, your light will not work correctly.
Remove the tailcap and reassemble using enough torque. Please make sure as this is a common error.
`
},
//*******************************************************************************************
{ Name: 'NPL20',
Context:`
NPL20
Light, Pistol light
NiteCore
460 Lumens Pistol Light
NPL20, 2 x RCR123A batteries, UI1 charger
Aero grade aluminum alloy HA III military grade hard-anodized finish
Ambidextrous high brightness scene lighting with momentary on fitted to pistol rail. Requires custom holster for carrying pistol. Works with rechargeable and non-rechargeable CR123. Ambidextrous power switches on both sides
89g
64.5mm
36mm
33mm
CREE XP-G3 S3 LED
1m, limited drops
Rainproof, do not submerge.
Flood area light
1 x small reflector with Crystal coated PDOT
1 x Nitecore RCR123A NL166
CR123A Li-ion batteries provided current delivery is high enough to sustain turbo mode.
Bundled external UI1 charger
Strobe
1 constant-on level
460 lumens
50 min
76 m
1440 cd
460 lumens
NPL30
Extra rechargeable batteries for use and spare non-rechargeable for emergencies.
https://nitecoresa.co.za/downloads/flyers/NiteCore_NPL20.pdf
https://nitecoresa.co.za/product/NPL20/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/NPL20.pdf
https://www.youtube.com/watch?v=rD8la0YuKks
Not suitable for general purpose
Pistol mounted light
1 year unit replacement with no support after 1 years<2Y (see definition)
Anti-impact reverse polarity protection mechanism
Unscrew battery cap counterclockwise with screwdriver or coin, insert battery, screw cap back on. Product will not work if the battery is incorrectly inserted. Unscrew mounting screw counterclockwise. Align stopper with recoil groove of rail. Tighten mounting screw clockwise.
Tactical Momentary Illumination: Press and hold either power switch. Release to turn off.
On/Off: Short press either power switch.
Strobe Mode: Triple press either power switch.
Short press to turn off.
ATR_Advanced_Temperature_Regulation: Integrated technology regulates output according to working condition and ambient environment to maintain optimal performance.
`
},
//*******************************************************************************************
{ Name: 'MH11',
Context:`
MH11
Light; Flashlight; Tactical; Budget
NiteCore
1000 Lumens, small size, budget-friendly tactical and multi-purpose flashlight.
MH11, 1 x 18650 NL1826 2600mAh battery, USB-C charging cable, Clip, Lanyard, Holster, Spare O-ring
Aero-grade aluminum alloy, HA III military-grade hard-anodized finish
Small handheld portable, comfortable tactical carry. Ideal for primary or backup light. Tactical tailcap switch. Operate firearm or other tools with the strong hand while controlling the light with the weak hand thumb. Does not have Momentary-on as a soft press will change brightness modes. Memory function, go on on last brightness. Easy use with pistol shooting. Performance scene lighting due to 1000 lumens and balanced beam profile. Blinding effect. Rugged construction and reliable performance. Can switch to spare batteries rapidly.
107g
128.3mm
107g
128.3mm
24mm
24mm
200g
145mm
80mm
50mm
Utilizes CREE XP-L2 V6 LED with a max output of 1000 lumens
Onboard charging via a USB-C port 1AMP or higher
1m limited falls
Rainproof, do not submerge.
Balanced beam and flood combination suitable for typical close-quarter applications.
None
4 brightness levels - Turbo, High, Mid, Low
1000 lumens Note: ATR unlikely to initiate due to low lumens.
2h 15min
190m
9150cd
230 lumens
4h 15min
91m
2100cd
50 lumens
20h 45min
40m
415cd
3 lumens
250h
10m
26cd
1 year on battery, 2 year component replacement on unit, component replacement year 3-5 at partial cost to client. unless for heavy use then 1y2y only. (see definition)
NiteCore 18650 such as NL1826, NL1835, NL1836
NiteCore 18650 non flat top
When the light is off, press the tailcap switch until a click sound is heard to turn it on.
When the light is on, press the tailcap switch until a click sound is heard to turn it off.
When the light is on, half press the tailcap switch to cycle brightness levels LOW, MID, HIGH, TURBO. The MH11 has memory function. When reactivated, the flashlight will automatically access the previous memorized brightness level. When the light is on and the power level is close to 50%, the power indicator will flash every 2 seconds. When the light is on and the power is close to depleted, the power indicator will flash quickly. The batteries should be replaced when the output appears to be dim or the flashlight becomes unresponsive due to low power. Insert battery and tighten tail cap, connect USB-C charge cable, use 1A or higher USB Port. During charging, the blue power indicator will flash slowly. When the battery is charged, the power indicator will stay constant on. When the light is on, connecting to a power source will automatically turn the light off. The MH11 can charge with the tailcap switch off, but it is recommended to press the tailcap switch ON before charging to increase the charging speed. Using this method, the charging time for an 18650 Li-ion battery (2600mAh) is approx. 2 hours 15 minutes. (Charged via the 5V/2A adapter) Please make sure the tailcap contacts are clean and that the tailcap is fastened 100% tightly. Please make sure your battery is inserted with the positive end forward and fully charged. Try using another USB cable and USB port to eliminate faulty cabling and charging issues. Don't charge from a PC as it can go into sleep mode and allow at least 8 hours for a full charge.
`
},
//*******************************************************************************************
{ Name: 'UT05',
Context:`
UT05 + BLT10
Light; Waist Light; Running Light
NiteCore
Waist Light + Running Belt
UT05 Waist Light, BLT10 Running Belt, NB10000 power bank not included
Aero-grade aluminum alloy, HA III military-grade hard-anodized finish
One switch design to control 2 brightness levels
73mm x 18mm x 8.3mm 87.4mm x 18mm x 8.3mm 750mm 40.4g (1.43oz) (Power Source Not Included) 180mm 90mm 25mm
80g
waist S/M: 640mm-800mm, L/XL: 900mm-1200mm
400mm
11.5mm
Utilizes a high CRI COB light source (CRI≥90, Color Temperature: 4000K) with a max output of 400 lumens
1m
Rainproof, do not submerge.
160° wide range flood beam
small
NITECORE NB10000 or similar Power Bank Recommended
USB Power Source (5V/1A or Above Output Available) (Compatible)
2 brightness levels - High, Low
400 lumens
5h 30min
27m
185cd
200 lumens
13h
20m
100cd
160° wide range flood beam, high CRI COB light source, lightweight and compact
Requires external USB power source
https://nitecoresa.co.za/downloads/flyers/NiteCore_UT05 BLT10.pdf
https://nitecoresa.co.za/product/UT05 bl10/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/UT05.pdf
https://www.youtube.com/watch?v=qfIukBOyH5M
BLT10 6 months, NU05 2ySealedUnit (see definition)
When the light is off, long press the Power switch to turn it on and access the LOW Level. When the light is on, long press the Power switch to turn it off. When the light is on, short press the Power switch to switch between HIGH and LOW. The power source should be replaced or recharged when the output appears to be dim or the light becomes unresponsive due to low power.
NITECORE BLT10 RUNNING BELT
The NITECORE BLT10 is an ultra-lightweight and breathable running belt tailor-made for outdoor activities including trail running, trekking, mountaineering, and cycling.
The main compartment utilizes wet absorbing mesh fabrics and elastic materials, available to contain a soft flask (sold separately).
The 70D non-elastic and breathable mesh is used to prevent sliding.
The hook-and-loop mesh design with soft trim is lightweight and breathable to avoid skin friction.
The YKK Zippers and UTX Duraflex Fasteners are durable and fearless of the complex outdoor environment.
The inner compartment is able to contain a power bank with a cable conduct channel, as well as keys, tissues, earphones, etc.
The snap fastener is durable and one-hand operable with convenient access to personal items.
The adjustable hook-and-loop fasteners are equipped to provide a perfect fit to the body.
The reflective points are to increase safety in night running.
The elastic cord is to carry lightweight clothes and towels.
`
},
//*******************************************************************************************
{ Name: 'NWL20',
Context:`
NWL20
Light; Work Light
NiteCore
Rechargeable Magnetic base Work Light
NWL20, 12700 NL2150 battery, USB-C Charge Cable
Made from durable plastic material
Multifunctional work light with spotlight, floodlight, and red light illumination.
Adjustable lighting angle, magnetic base, and hook for versatile use.
None
224g
216.7mm
50mm
41.2mm
295g
145mm
95mm
45mm
Spotlight and floodlight with a max output of 600 lumens
1m, limited drops
Rainproof, do not submerge.
Spotlight + floodlight
dual reflector to support small spotlight and a floodlight
1x 21700 NL2150, NL2160 Rechargeable Li-ion Battery (Recommended)
18650 Rechargeable Li-ion Battery (Incompatible)
Primary Lithium Battery CR123 (Incompatible)
Rechargeable Li-ion Battery RCR123 (Incompatible)
NL2150R (Incompatible)
NL2150Hpi NL2153Hpi (compatible)
Intelligent Li-ion battery charging circuit with a USB-C charging port (5V⎓2A)
Red light illumination, red flashing
5 brightness levels, 3 light sources
290 lumens
10h
93m
1269cd
125 lumens
15h
60m
524cd
600 lumens
6h
43m
237cd
260 lumens
10h
20m
100cd
30 lumens
78h
7m
13cd
30 lumens
30h
7m
12cd
30 lumens
60h
7m
12cd
Optional extra NL2150 battery and ui1, ui2 charger
Multifunctional work light with spotlight, floodlight, and red light illumination.
Adjustable lighting angle, magnetic base, and hook for versatile use.
None
https://nitecoresa.co.za/downloads/flyers/NiteCore_NWL20.pdf
https://nitecoresa.co.za/product/NWL20/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/NWL20.pdf
https://youtu.be/K-XmVfuxzQs
1 year on battery, 2 year component replacement on unit, component replacement year 3-5 at partial cost to client. but for heavy-duty use only 1y2y
Red light illumination designed for preserving night vision; red flashing designed for emergency warnings. One-switch interface design for easy operation. A glow-in-the-dark LED strip for quick location. Designed with 4 power indicators to inform the remaining battery power. A wide magnetic base on the back comes with a hook, suitable for use in various environments. 0° - 180° adjustable lighting angle After unscrewing the battery cap, insert/remove the battery and screw to tighten the cap. The NWL20 has a mode memory function. When the light is off, short press the Power switch to access Floodlight MID / Spotlight HIGH. When reactivated, it will automatically access the previously memorized mode. When the light is on with no operation in 3 seconds, short press the Power switch to turn it off. When the light is on, short press the Power switch to cycle through the following sequence: MID, HIGH, LOW, Red CONSTANT-ON, Red FLASHING, Off. When the light is on, short press the Power switch to cycle through the following sequence: HIGH, LOW, Off. When the light is on, long press the Power switch to switch between Floodlight Mode and Spotlight Mode. After the light is turned on, the power indicators light up in sequence to show the remaining battery power for 2 seconds. If the battery is low and the light is turned on, a power indicator will flash, signaling low battery. Please recharge the light promptly. Uncap the USB protection cover and use the USB cable to connect an external USB. The charging time is approximately 3h (charged via the 5V/2A adapter). During the charging process, the power indicators will gradually transition from flashing to a steady light to display the battery level. When the battery is fully charged, all 4 power indicators will become steadily turned on. The NWL20 is available when charging.
`
},
//*******************************************************************************************
{ Name: 'TIPSE',
Context:`
TIP SE
Light; Keychain Light; Everyday Carry
NiteCore
700 Lumens super bright Keychain light
TIP SE with 500mAh integrated li-ion battery, key rings, key clasp, clip
Anodized Aluminium. After extensive use and abrasion, anodizing may scratch off.
Easily operable dual-switch design
26g
60mm
24.5mm
13mm
50g
100mm
40mm
20mm
Utilizes 2 x OSRAM P8 LEDs with a max output of 700 lumens
1m, limited drops
Rainproof, do not submerge.
Wide-angle beam due to small reflectors
2 x small reflectors
Integrated Built-in 500mAh Li-ion battery
Not removable or replaceable
Built-in Li-ion battery charging circuit with a USB-C port
4 brightness levels available with direct access to TURBO/LOW
700 lumens. ATR will initiate if the light becomes too warm.
15min
90m
2100cd
180 lumens
1h 30min
45m
500cd
30 lumens
8h
18m
80cd
1 lumen
50h
4m
4cd
https://nitecoresa.co.za/downloads/flyers/NiteCore_TIPSE.pdf
https://nitecoresa.co.za/product/TIPSE/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/TIPSE.pdf
https://www.youtube.com/watch?v=lKPbEz7bU6E
2 years on unit with now additional support after 2 years
Small portable device meant to be ever-present and available when needed.
Not designed for extended runtime on bright, no removable battery.
When the light is off, short press the Power switch to turn it on. When the light is on, short press the Power switch to turn it off. The TIP SE has 2 user modes, DEMO Mode and DAILY Mode. The default setting is DEMO Mode. It is recommended to switch it to DAILY Mode when in daily use. DEMO Mode: The light will automatically shut down if there is no operation in 30 seconds. DAILY Mode: The light will not automatically shut down and will need to be shut down manually. When the light is on/off, long press both the Power switch and the Mode switch simultaneously to switch between DEMO and DAILY Mode. The light will flash to indicate the current user mode: flashing once to indicate DEMO Mode and flashing twice to indicate DAILY Mode. Reactivating the light within 3 seconds after it automatically shuts down in DEMO mode will temporarily access DAILY Mode until it is turned off. When the light is on, short press the Mode switch to cycle through the following brightness levels: "LOW, MID, HIGH". (The TIP SE has memory function. When reactivated, the light will automatically access the previous memorized brightness level.) When the light is off, press and hold the Power switch for over 2 seconds to momentarily access LOW. Release to turn it off. When the light is off, press and hold the Mode switch for over 2 seconds to momentarily access TURBO. Release to turn it off. When the light is on, press and hold the Mode switch to momentarily access TURBO. Release to return to the previous brightness level. When the light is off, press and hold the Mode switch and release in approx. 0.6 seconds to directly access TURBO. When the light is off, press and hold the Power switch and release in approx. 0.6 seconds to directly access LOW. Note: The TIP SE will regulate its output to avoid overheating and prolong its lifespan when accessing TURBO for over 30 seconds. When the light is off, short press the Mode switch and the power indicators will flash to indicate the remaining power of the battery: Flashing three times indicates that the power is above 50%. Flashing twice indicates that the power is below 50%. Flashing once indicates that the power is below 10%. When the power is low, the red indicators will flash to inform the user. Connect USB-C cable to USB Port. The red indicators located beneath the switches will be turned on steadily. When the battery is fully charged, the indicators will turn green. When the power is low, the red indicators will flash. The charging time is approx. 1h 30min. The standby time is approx. 12 months when the battery is fully charged. Why does my TIP SE shut down in 30 seconds? The TIP SE has 2 user modes, DEMO Mode and DAILY Mode. The default setting is DEMO Mode where the product will automatically shut down if there is no operation in 30 seconds. It is recommended to switch it to DAILY Mode when in daily use. Please follow the steps below for mode switching: 1. When the light is on/off, long press both the Power switch and the Mode switch simultaneously to switch between DEMO and DAILY Mode. 2. The light will flash to indicate the current user mode: flashing once to indicate DEMO Mode and flashing twice to indicate DAILY Mode.
`
},
//*******************************************************************************************
{ Name: 'LR10',
Context:`
LR10
Light; Lantern; Camping
NiteCore
280 lumens pocket Lantern
LR10, Micro USB cable
Durable PC materials
66g
65.5mm
50mm
25mm
111g
120mm
80mm
30mm
Utilizes 9 high CRI LEDs (CRI≥90, temperature color of 4500k) to emit max 250 lumens
1m
Rainproof, do not submerge.
Wide-angle flood from highly translucent PC diffuser, allowing all light sources to be well distributed
None
Built-in 1200mAh Li-ion battery
Integrated intelligent charging circuit for Micro-USB charging
Caution light (slow blink), SOS, beacon
3 brightness levels - High, Mid, Low
250
1h
24m
38cd
65
5h 15min
12m
9cd
8
38h
3.4m
0.75cd
250
250
250
2 years on unit with now additional support after 2 years
https://nitecoresa.co.za/downloads/flyers/NiteCore_LR10.pdf
https://nitecoresa.co.za/product/LR10/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/LR10.pdf
https://www.youtube.com/watch?v=1vOWl8-3cX4
Pocket-sized, lightweight, multiple special modes, magnetic base, user-friendly, practical
Batteries can NOT be removed
Limited runtime on the highest brightness due to small size
When the light is turned off, press and hold the power switch to turn the light on and enter the low brightness level.
When the light is turned on, press and hold the power switch for about 0.6 seconds to turn the light off.
With the light turned on, tap the power switch repeatedly to cycle through Mid-High-Low.
When the light is turned off, tap the power switch twice successively to turn Caution Light (slow blink) on.
Tap the power switch repeatedly to cycle through SOS-Beacon-Caution Light.
Turn off the light to exit Special Modes.
With incorporated Advanced Temperature Regulation module, LR10 regulates its output and adapts to the ambient environment, therefore maintaining optimal performance.
With the light turned on, hold down the power switch for 3 seconds to turn the light off, which in turn activates the power indicator to blink once every 2 seconds. This serves to alert users to the location of the LR10.
With the LR10 fully charged, the LR10 will remain operational for 6 months with the power indicator activated, and 12 months in standby with the power indicator deactivated.
Turn the light on again to exit the positioning function.
When the light is switched off, tap the power switch once to activate the built-in power indicator. The power indicator will flash to indicate the remaining battery level:
3 flashes represent battery level above 50%.
2 flashes represent battery level below 50%.
1 flash represents battery level below 10%.
When the battery level is low (below 8%), only the Mid or Low mode is accessible.
When the battery level is depleted, the LR10 can not be switched on. If long-pressing or tapping the switch twice quickly, the red indicator will quickly flash 2 seconds or become unresponsive (over-discharging protection).
Please recharge the LR10 when the battery level is low. In an emergency, the LR10 can be used for lighting during charging.
Unless your USB cable or USB adapter is faulty, please make sure your battery is charged. You may also try using another USB cable and USB port to eliminate faulty cabling.
Don't charge from a PC as it can go into sleep mode.
Connect the Micro-USB cable to the lantern and USB port.
It takes about 3 hours to recharge the LR10.
During charging, the red indicator will illuminate steadily to notify users. It will turn green upon charging completion.
`
},
//*******************************************************************************************
{ Name: 'MT06MD',
Context:`
MT06MD
Light; Flashlight; Medical Inspection Light; Pen Light
NiteCore
NiteCore MT06MD Flashlight Only
MT06MD, integrated li-ion battery
Aerospace grade aluminium alloy construction, HAIII hard anodising
Tail switch.
Tail switch direct access to turbo.
Very small form factor.
Lack brightness for professional tactical use.
tail switch provides easy one-handed operation
40g
128mm
14mm
14mm
50g
180mm
55mm
20mm
Utilises a Nichia 219B LED (CRI>90) with a max output of 180 lumens
1m
Rainproof, do not submerge.
medium wide
1 small
Primary AAA battery 1.5V (Recommended) or Rechargeable AAA battery 1.2V (Recommended)
3 brightness levels available
180 lumens
45min
58m
860cd
45 lumens
5h15min
28m
194cd
4 lumens
35h
11m
30cd
Compact size and shape
Relative low performance and not li-ion rechargeable
https://nitecoresa.co.za/downloads/flyers/NiteCore_MT06MD.pdf
https://nitecoresa.co.za/product/MT06MD/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/TIPSE.pdf
https://www.youtube.com/watch?v=gPzobyn8RrA
1 year replacement with no support after 1 year
With the light turned off, press the switch until a click is heard to enter low output directly.
Press the switch again to turn the light off.
With the light turned on, turning the MT06MD off and on within 2 seconds or simply press the switch halfway to down cycle brightness through low, mid, high.
The MT06MD will turn on in "low" by default after it is turned off for 2 seconds.
The MT06MD will automatically step down in lumens after 5 minutes of use to prevent overheating and extend battery life.
`
},
//*******************************************************************************************
{ Name: 'TIKIGITD',
Context:`
TIKI GITD or TIKI
Small Keychain Flashlight Micro USB-C Rechargeable
NiteCore
NiteCore Tiki GITD Keychain Light + Micro USB Cable
TIKI/TIKI GITD/TIKI GITD BLUE/TIKI LE light, key clasp
Head constructed from metallic materials. Body constructed from durable PC (V0) materials.charged.
3 outputs with a single switch
12g
55mm
14.7mm
23g
140mm
85mm
15mm
Utilizes a primary OSRAM P8 LED with a max output of 300 lumens auxiliary high CRI white LED (CRI≥90; Color Temperature: 4500K) and an auxiliary UV LED (Power: 500mW; Wavelength: 365nm)
1m, limited drops
Rainproof, do not submerge.
Wide flood
1 x small reflector
Built-in rechargeable Li-ion battery
Built-in Li-ion battery charging circuit with a USB-C port
UV light, Aux White Constant-on, Aux White Warning Flashing
Primary white light: 4 brightness levels (Ultralow, Low, Mid, High)
300 lumens
30min
71m
1260cd
60 lumens
1h
31m
250cd
15 lumens
4h
15m
60cd
1 lumen
40h
4m
4cd
500mW
45min
22 lumens
1h 30min
22 lumens
20h
3 lumens
1h 45min
0.8 lumens
1h 45min
Ultra compact size, rechargeable, auxiliary lights
Entry level illumination.
https://nitecoresa.co.za/downloads/flyers/NiteCore_TIKI_GITD.pdf
https://nitecoresa.co.za/product/tikigitd/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/tikigitd.pdf
https://www.youtube.com/watch?v=14I5vu-rQRw
1 year replacement with no support after 1 year
Connecting USB cable to a USB adapter. The charging time is approx. 1h 30min. During the charging process, the charging indicator located beneath the switch will be steadily turned on. When the battery is fully charged, the charging indicator will be turned off. The product should be recharged when the output appears to be dim or the light becomes unresponsive due to low power. When the light is off, double press the Power switch to access ULTRALOW of the primary white light. When the light is on, long press the Power switch to turn it off. When the light is on, short press the Power switch to cycle through "ULTRALOW, LOW, MID, HIGH". Note: The product will regulate its output to avoid overheating and prolong its lifespan when accessing HIGH for over 1 minute. When the light is off, press and hold the Power switch to access HIGH of the primary white light. Release to turn it off. TIKI/TIKI GITD/TIKI GITD BLUE: When the light is off, triple press the Power switch to turn on the UV light. When the UV light is on, short press the Power switch to cycle through Aux White Constant-on or Aux White Warning Flashing UV. Long press the Power switch to turn it off. Unless your USB cable or USB adapter is faulty, please make sure your battery is charged. You may also try using another USB cable and USB port to eliminate faulty cabling. Don't charge from a PC as it can go into sleep mode.
`
},
//*******************************************************************************************
{ Name: 'EH1',
Context:`
EH1
Light; Flashlight; Industrial; Mining
Nitecore
Self contained USB rechargeable mining hard hat type cap lamp with 10h runtime.
2 x NiteCore 18650 3400 mAh Rechargeable Li-ion Battery integrated, Magnetic clip charging cable, Hard hat mount plastic adhesive clip
Durable PolyCarbonate Materials
Intended for mining and industrial Explosion proof environments. Large battery capacity and long runtime.
Large form factor, non-removable batteries, prioritises runtime over brightness.
Not a tactical device
Single switch offers access to all functions
58g
59.3mm
46mm
26.4mm
310g 110mm 130mm 95mm
Single high-performance LED with a maximum output of 260 lumens
1m
Rainproof, do not submerge.
Spot
1 small reflector
2 x Integrated NL1834 3400mAh
USB magnetic clip-on charger cable rechargeable
RED, RED Flashing, SOS
Low, Mid, High
260 lumens
10h
205m
10500cd
65 lumens
40h
22 lumens
120h
Filters (special order only), Head Strap
2 year unit replacement with no support after 2 years
https://nitecoresa.co.za/downloads/flyers/NiteCore_EH1.pdf
https://nitecoresa.co.za/product/eh1/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/1562314949.pdf
https://www.youtube.com/watch?v=y2zyqJgb7HU
Built-in Li-ion battery
Connect the USB to the port and the magnetic clip to the EH1. Fully charging a depleted battery takes approximately 10 hours.
During charging, the blue indicator will blink slowly. When charging is complete, the blue indicator will illuminate steadily.
With the light turned off, single press the power button to turn the light on.
With the light turned on, press and hold the power button for more than 1 second to turn the light off.
With the light turned on, single press the power button to cycle through ultralow, low, mid, and high brightness levels.
With the light turned on, double-press the power button to access turbo output.
A single press returns to the previously used brightness level.
With the light turned off, press and hold the power button for more than 1 second to access SOS mode directly.
When the light is turned on, or when plugging/unplugging the USB cable during charging, the blue power indicator will blink to indicate the remaining battery power.
It will blink 3 times when power is above 50%, twice when between 10-50%, and once when below 10%.
When the EH1 is turned off, simultaneous presses of the power button for 2 seconds will lock/unlock the EH1 to prevent accidental activation.
The EH1 can be mounted to a hard hat using the 3m tape connector that is included.
Optional head straps are also available.
`
},
//*******************************************************************************************
{ Name: 'HC35',
Context:`
HC35
Light; Headlamp; High Performance; Heavy
Nitecore
Heavy large 2700 lumens high output Rechargeable headlamp.
HC35, NITECORE 21700 rechargeable Li-ion battery (NL2140HP 4000mAh), spare o-ring, clip, headband, bracket, 18650/CR123 battery magazine, USB charging cable, lanyard
Constructed from aero grade aluminium alloy, HA III military grade hard-anodized finish
21700 battery compatibility for high capacity, ultra high performance with 2700 lumens turbo.
Large form factor
No, not a tactical device
One switch controls 5 brightness levels and 3 special modes
128.2mm
28.85mm x 31.77mm
26mm
28.3mm
Utilizes 4 x CREE XP-G3 S3 LEDs with a max output of 2700 lumens
1m, limited drops
Rainproof, do not submerge.
100° wide angle flood illumination angle
Combination of 4 small reflectors Utilizes a bead surface total reflective optic reflector for uniform and soft light.
Bundled with NL2140HP, recommend NITECORE 21700 NL2150Hpi, NITECORE 21700 NL2153Hpi as extra batteries
21700 Rechargeable Li-ion Battery (Output Over 8A) 3.6V/3.7V, 18650 Rechargeable Li-ion Battery (Output Over 8A) 3.6V/3.7V,
Primary Lithium Battery CR123 3V, Rechargeable Li-ion Battery RCR123 3.6V/3.7V
21700 Rechargeable Li-ion Battery (Output Below 8A) 3.6V/3.7V, 18650 Rechargeable Li-ion Battery (Output Below 8A) 3.6V/3.7V
Built-in Li-ion battery charging circuit with a Micro-USB port
Strobe, beacon, SOS
5 brightness levels - Turbo, High, Mid, Low, Ultralow
2700 lumens, will heat up rapidly, ATR will initiate and reduce brightness
45min
134m
4500cd
Note: The runtime for TURBO mode is tested without the temperature regulation.
800 lumens
3h
73m
1330cd
270 lumens
8h 15min
40m
400cd
40 lumens
52h
14m
52cd
1 lumen
1200h
3m
2cd
2700 lumens
2700 lumens
2700 lumens
Extra batteries, NL2150Hpi, NL2153Hpi and extra external charger UI1, UI2, UMS4
1 year on battery, 2 year component replacement on unit, component replacement year 3-5 at partial cost to client.
https://nitecoresa.co.za/downloads/flyers/NiteCore_HC35.pdf
https://nitecoresa.co.za/product/hc35/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/hc35.pdf
https://www.youtube.com/watch?v=UJdiE00i_1o
The power indicator beneath the switch indicates the remaining battery power, The power indicator can also display the battery voltage (±0.1V), Incorporated Advanced Temperature Regulation (ATR) module, Specially designed lightweight and breathable headband included, Electronic reverse polarity protection, Magnetic tail cap with stand capability
Insert the battery and tighten the tail cap.
The power indicator beneath the switch will flash to indicate the battery voltage.
On: When the light is off, long press the Power Button for 1 second to turn it on.
Off: When the light is on, long press the Power Button for 1 second to turn it off.
When the light is on, short press the Power Button to cycle through ULTRALOW, LOW, MID, HIGH, TURBO".
ULTRALOW: When the light is off, short press the Power Button to directly access ULTRALOW.
TURBO: When the light is off, long press the Power Button for over 1 second to directly access TURBO after accessing the memorized brightness level.
When the light is off, double press the Power Button to access the STROBE Mode.
When the STROBE Mode is on, short press the Power Button to cycle through the following special modes: BEACON, SOS, STROBE.
Connect the USB cable to an external USB port 2A or higher.
`
},
//*******************************************************************************************
{ Name: 'HC68',
Context:`
HC68
Light; Headlamp; High Performance; Dual Beam
Nitecore
High performance top of the range dual beam headlamp
HC68 Headlamp, Head strap, 18650 3500mAh HP(NL1835HP) battery, USB-C Cable
Constructed from aero grade aluminium alloy HA III military grade hard-anodized finish
Innovative combination of Adjustable Brightness Spot and adjustable brightness flood.
Higher price bracket.
No, not a tactical device
Power Button for on/off and mode button for modes.
151g 91.5mm 35mm 45mm 245g 120mm 100mm 55mm
Utilizes 2 x Luminus SST-40-W LEDs for dual primary white lights with a max output of 2000 lumens
1m, limited drops
Rainproof, do not submerge.
Innovative combination of Adjustable Brightness Spot and adjustable brightness flood.
The spotlight uses the TIR optic lens specially designed for long range lighting.
The floodlight uses TrueVision Technology for an ultra smooth flood beam
NITECORE NL1835HP 18650 Li-ion Battery (3500mAh)
Button Topped 18650 Rechargeable Li-ion Battery (Discharge Current Over 8A), 2 x Lithium Battery CR123, 2 x Rechargeable Li-ion Battery RCR123
Flat Topped 18650 Battery, Button Topped 18650 Rechargeable Li-ion Battery (Discharge Current Below 8A)
Intelligent Li-ion battery charging circuit with a USB-C charging port
SOS, beacon
4 brightness levels for primary white light Turbo, Higher, High, Mid, Low, Ultralow
SOS, beacon
4 brightness levels for primary white light - Turbo, Higher, High, Mid, Low, Ultralow
2000 lumens until ATR initialise.
Not specified, will reduce brightness when ATR initialises.
185m
8600cd
1800 lumens
*30min will reduce brightness when ATR initialises.
202m
10300cd
950 lumens
850 lumens
2h 30min
2h 30min
147m
57m
5400cd
820cd
250 lumens
220 lumens
6h
6h
75m
29m
1420cd
210cd
50 lumens
45 lumens
28h
28h
32m
18m
280cd
87cd
1 lumen
1 lumen
800h
800h
4m
2m
4cd
1cd
11 lumens
30h
4m
3 lumens
110h
2m
11 lumens
160h
2000 lumens
2000 lumens
Extra batteries and external charger
https://nitecoresa.co.za/downloads/flyers/NiteCore_HC68.pdf
https://nitecoresa.co.za/product/hc68/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/hc68.pdf
https://youtu.be/Kj0EnToy__g?list=TLGGf5WNjgei3wAxMTAzMjAyNA
1 year on battery, 2 year component replacement on unit, component replacement year 3-5 at partial cost to client.
180° tilt angle for different illumination needs. Power indicator beneath the "+" and "-" Buttons indicates the remaining battery power, The power indicator can display the battery voltage (±0.1V) As illustrated, after unscrewing the battery cap, insert / remove the battery(s) and screw to tighten the tail cap. Note: After the battery insertion, the power indicator beneath the "+" and "-" Buttons will flash to indicate the battery voltage. The HC68 is equipped with an intelligent charging system. As illustrated, tighten the battery cap after inserting the battery and unscrew the charging port cap until the charging port is fully exposed. Then use the USB cable to connect an external power supply to the charging port to begin the charging process.
When the light is off, short press the Power Button to turn it on.
When the light is on, short press the Power Button to turn it off.
When the light is on, short press the "+" Button each time to increase the brightness level in sequence from ULTRALOW to HIGHER.
When the light is on, short press the "-" Button each time to decrease the brightness level in sequence from HIGHER to ULTRALOW.
When the light is on, hold the Power Button for 1 second to access TURBO temporarily.
Short press the Power Button to return to the previous memorized status.
The HC68 has a spotlight/floodlight adjustment function.
The output ratio of the spotlight and floodlight is stepless adjustable on a certain brightness level.
On: When the light is off, double press the Power Button to access RED LOW.
Switch: When RED LOW is on, short press the "+" Button each time to switch to the following modes in sequence: RED, LOW RED, HIGH RED, FLASHING, BEACON, SOS.
When the battery is inserted or the power is disconnected during the charging process, the power indicator will flash to show the battery voltage (±0.1V). The integrated ATR (Advanced Temperature Regulation) technology regulates the output of the HC68 according to the working condition and ambient environment.
The batteries should be replaced when the output appears to be dim or the headlamp becomes unresponsive due to low power.
Unless your flashlight charger is faulty, please make sure your batteries are charged and inserted the correct way around. Please also try using another USB cable and USB port to eliminate faulty cabling. Don't charge from a PC as it can go into sleep mode. The metal cap battery cover of the flashlight must be 100% fastened to the shaft and must be clean. If metal on metal contact is not achieved, your light may not work correctly. Please disassemble and reassemble, tightening all parts. This is a common problem so please MAKE SURE
`
},
//*******************************************************************************************
{ Name: 'HC60V2',
Context:`
HC60V2 / HC60W V2 / HC60M V2
Light; Headlamp; High Performance; Value
Nitecore
1200 lumens High performance best value for money headlamp
HC60V2: HC60V2 Headlamp, Head strap, 18650 3400mAh battery (NL1835), USB Cable, Spare O-ring, USB-C Charging Cable, Spare Switch Cover, Headband, Bracket. HC60W V2: NITECORE 18650 Rechargeable Li-ion Battery (NL1834 3400mAh), Spare O-ring, USB-C Charging Cable, Spare Switch Cover.
Constructed from aero-grade aluminum alloy, HA III military grade hard-anodized finish
Best value for money high-intensity headlamp.
No noticeable disadvantage.
No, not a tactical device.
Single side switch for on/off and changing modes
145g (HC60V2 / HC60W V2) 150g (HC60M V2) 84mm 35.8mm (HC60V2 / HC60W V2) 50mm (HC60M V2) 53.5mm (HC60V2 / HC60W V2) 46mm (HC60M V2) 220g 150mm 100mm 55mm
Utilizes an OSRAM P9 LED with a max output of 1200 lumens
1m, limited drops
Rainproof, do not submerge.
100° wide angle flood illumination angle
Precision Digital Optics Technology (PDOT) for uniform and soft light.
NITECORE 18650 Rechargeable Li-ion Battery (Button Topped) NL1826, NL1834, NL1835, NL1836, NL1835HP, NL1836R
Compatible: 2 x Primary Lithium Battery CR123, 2 x Rechargeable Li-ion Battery RCR123. Incompatible: 18650 Rechargeable Li-ion Battery (Flat Topped)
Built-in Li-ion battery charging circuit with a USB-C port
Strobe, SOS, Beacon
5 brightness levels - Turbo, High, Mid, Low, Ultralow
1200 lumens, will heat up rapidly, ATR will initiate and reduce brightness
45min
130m
4240cd
450 lumens
2h 15min
78m
1550cd
250 lumens
6h 30min
56m
780cd
40 lumens
26h
28m
200cd
1 lumen
680h
3m
3cd
1200 lumens
1200 lumens
1200 lumens
1 year on battery, 2 year component replacement on unit, component replacement year 3-5 at partial cost to client. (see definition)
https://nitecoresa.co.za/downloads/flyers/NiteCore_HC60V2.pdf
https://nitecoresa.co.za/product/hc60v2/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/hc60v2.pdf
https://www.youtube.com/watch?v=WEJBhLKYkXw
Incorporated Advanced Temperature Regulation (ATR) module, 180° adjustable vertical tilt angle
Unscrew the battery cap, insert/remove the battery and tighten the battery cap.
The power indicator will flash to indicate the battery voltage.
Ensure the battery(s) is/are inserted with the negative end towards the spring. The product will not work if the battery(s) is/are incorrectly inserted. When the product is kept in a backpack or left unused for a prolonged time, please remove all batteries to prevent accidental activation or battery leakage. DO NOT cover the headlamp or put it close to other objects when turned on to avoid accidents. The product will produce massive heat when it runs for a prolonged period. Please pay attention to safety when using it to prevent scalds.
Unscrew the charging port cap after inserting the battery.
Use the USB cable to connect a USB adapter 2A or more.
During the charging process, the power indicator will flash slowly.
When the battery is fully charged, charging will cease and the power indicator will stay on.
When the charging status is abnormal (e.g. the battery is defective or inserted incorrectly), the light will cease the charging process and the power indicator will flash quickly.
The charging time for an 18650 Li-ion battery (3400mAh) is approx. 5 hours. (Charged via the 5V/1A adapter)
When the light is off, long press the Power Button to turn it on.
When the light is on, long press the Power Button to turn it off. This light has memory function.
When reactivated, the headlamp will automatically access the previous memorized brightness level.
When the light is on, short press the Power Button to cycle through the following brightness levels: ULTRALOW, LOW, MID, HIGH, TURBO.
ULTRALOW: When the light is off, short-press the Power Button to directly access ULTRALOW.
TURBO: When the light is off, press and hold the Power Button even after accessing the memorized brightness level until it accesses TURBO.
When the light is off, double press the Power Button to access the STROBE Mode.
When the STROBE Mode is on, short press the Power Button to cycle through the following special modes: SOS, BEACON, STROBE.
When one of the special modes is on, long press the Power Button to exit special modes and turn off the light.
When the battery is inserted, the power indicator will flash to show the battery voltage (±0.1V).
For example, when the battery voltage is at 4.2V, the power indicator will flash 4 times followed by a 1.5-second pause and 2 more flashes.
Different voltages represent the corresponding remaining battery power levels.
The integrated ATR (Advanced Temperature Regulation) technology regulates the output according to the working conditions
and ambient environment to maintain optimal performance.
The batteries should be replaced when the output appears to be dim or the headlamp becomes unresponsive due to low power.
Unless your flashlight charger is faulty, please make sure your batteries are charged and inserted the correct way around. Please also try using another USB cable and USB port to eliminate faulty cabling. Don't charge from a PC as it can go into sleep mode. The metal cap battery cover of the flashlight must be 100% fastened to the shaft and must be clean. If metal on metal contact is not achieved, your light may not work correctly. Please disassemble and reassemble, tightening all parts. This is a common problem so please MAKE SURE.
`
},
//*******************************************************************************************
{ Name: 'NU06LE',
Context:`
NU06LE
Signal Light; High Visibility; Military; Rescue; Police
Nitecore
Small form factor signal light
NU06LE light, Internal Rechargeable Li-ion Battery, Magnetic Hook-and-loop Bracket, Curved Hook-and-loop Helmet Bracket, MOLLE System Bracket, USB-C Charging Cable
Made from durable PC materials
Multi-colour signal light, can be used while charging
Not a flashlight
No, is a tactical signal light with centre button
One centre switch design for on/off and mode switching
15.8g 29.5mm 29.5mm 25.4mm 110g 120mm 90mm 40mm
Utilizes 4 x high performance LEDs
1m, limited falls
Rainproof, do not submerge.
none, signal light only
Built-in 250mAh Li-ion battery
None, but can be used while charging.
Built-in Li-ion battery charging circuit with a USB-C charging port
Police Warning Flashing (Red/Blue)
9 modes including 4 colors of constant-on + flashing
3 lumens
9h
3 lumens
75h
8 lumens
9h
8 lumens
75h
2 lumens
5h
2 lumens
48h
15 lumens
5h 45min
15 lumens
54h
56h
2 year unit replacement with no support after 2 years
A built-in power indicator indicates the remaining battery power. ARC rail adapter on the body and 3 lightweight brackets included to enable multiple mounting and carry options.
https://nitecoresa.co.za/downloads/flyers/NiteCore_NU06LE.pdf
https://nitecoresa.co.za/product/nu06le/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/nu06le.pdf
https://www.youtube.com/watch?v=ZNoejyJcg1U&
Built-in rechargeable Li-ion battery
Use the USB charging cable to connect an USB adapter.
During the charging process, the power indicator will flash.
When the battery is fully charged, the power indicator will turn on steadily.
The charging time is approx. 1h 45min.
The standby time is up to 12 months if the battery has been fully charged.
When the light is off, long press the Power Button for over 1 second to turn it on.
When the light is on, long press the Power Button to turn it off.
When the light is off, keep holding the Power Button for over 5 seconds after turning on the light to cycle through the following modes: Red Constant-on, Red Flashing, Green Constant-on, Green Flashing, Blue Constant-on, Blue Flashing, White Constant-on, White Flashing, Red/Blue Police Warning Flashing.
Release to select the desired mode.
When the light is off, short press the Power Button and the power indicator will flash to indicate the remaining power of the battery:
Flashing three times indicates that the power is above 50%;
Flashing twice indicates that the power is below 50%;
Flashing once indicates that the power is below 10%.
`
},
//*******************************************************************************************
{ Name: 'NU06MI',
Context:`
NU06MI
Signal Light; High Visibility; Military; Rescue; Police, Infra Red
Nitecore
Small form factor signal light with 940nm INFRA RED output
NU06Mi light, Internal Rechargeable Li-ion Battery, 3 Ultra Lightweight Brackets, Magnetic Hook-and-loop Bracket, Curved Hook-and-loop Helmet Bracket, MOLLE System Bracket, USB-C Charging Cable
Made from durable PC materials
Multi-colour signal light with 940nm INFRA RED output, can be used while charging
Not a flashlight
No, is a tactical signal light with centre button
Single switch design for on/off and mode switching
16.7g
29.5mm
29.5mm
25.4mm
110g
120mm
90mm
40mm
Utilizes 4 x high performance LEDs
1m, limited falls
Rainproof, do not submerge.
none, signal light only
Built-in 250mAh Li-ion battery
None, but can be used while charging.
Built-in Li-ion battery charging circuit with a USB-C charging port
Police Warning Flashing (Red/Blue)
Available with IR light, red light, green light and blue light of totally 9 modes
4h
50h
3 lumens
9h
3 lumens
75h
8 lumens
9h
8 lumens
75h
2 lumens
5h
2 lumens
48h
56h
2 year unit replacement with no support after 2 years
ARC rail adapter on the body and 3 lightweight brackets included to enable multiple mounting and carry options.
https://nitecoresa.co.za/downloads/flyers/NiteCore_NU06MI.pdf
https://nitecoresa.co.za/product/nu06mi/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/nu06mi.pdf
https://www.youtube.com/watch?v=u3ObmmoyTbk&
Built-in rechargeable Li-ion battery
Use the USB charging cable to connect an USB adapter.
During the charging process, the power indicator will flash.
When the battery is fully charged, the power indicator will turn on steadily.
The charging time is approx. 1h 45min.
The standby time is up to 12 months if the battery has been fully charged.
When the light is off, long press the Power Button for over 1 second to turn it on.
When the light is on, long press the Power Button to turn it off.
When the light is off, keep holding the Power Button for over 5 seconds after turning on the light to cycle through the following modes: Red Constant-on,
Red Flashing, Green Constant-on, Green Flashing, Blue Constant-on, Blue Flashing, White Constant-on, White Flashing, Red/Blue Police Warning Flashing.
Release to select the desired mode.
When the light is off, short press the Power Button and the power indicator will flash to indicate the remaining power of the battery:
Flashing three times indicates that the power is above 50%;
Flashing twice indicates that the power is below 50%;
Flashing once indicates that the power is below 10%.
Built-in rechargeable Li-ion battery
Uncap the charging port and use the USB cable to connect an USB adapter.
The power indicator will flash. When the battery is fully charged, the power indicator will turn on steadily.
The charging time is approx 1h 45min. (Charged via the 5V/1A adapter)
The standby time is up to 12 months if the battery has been fully charged.
During the charging process, the NU06 MI can still be turned on. (The indicator will keep flashing in any mode.)
When the light is off, long press the Power Button for 1 second to turn it on.
When the light is on, long press the Power Button to turn it off.
When the light is off, keep holding the Power Button for over 5 seconds after turning on the light to cycle through the following modes: IR Constant-on,
IR Flashing, Red Constant-on, Red Flashing, Green Constant-on, Green Flashing, Blue Constant-on, Blue Flashing, Red/Blue Police Warning Flashing.
Release to select the desired mode.
The NU06 MI is available with 9 modes including 4 lights of constant-on + flashing and Red/Blue Police Warning Flashing.
The access of IR modes is indicated by the vibration as IR light is invisible to the naked eyes.
Mode / Vibration
IR Constant-on / 1s
IR Flashing /
IR Off / Other
When the light is off, short press the Power Button and the power indicator will flash to indicate the remaining power of the battery:
Flashing three times indicates that the power is above 50%;
Flashing twice indicates that the power is below 50%;
Flashing once indicates that the power is below 10%.
How can we tell whether the IR mode of the NU06 MI is turned on without night vision devices?
Short press the Power Button. If the signal light vibrates once, it indicates that the NU06 MI is in the IR Constant-on Mode.
If the signal light vibrates twice, it indicates that the NU06 MI is in the IR Flashing Mode.
If the blue indicator slowly flashes 1-3 times (Power Indication), it indicates that the NU06 MI is off.
`
},
//*******************************************************************************************
{ Name: 'NU31',
Context:`
NU31
Light; Headlamp; High Performance; Value
Nitecore
NU31 Headlamp + Internal rechargeable Li-ion battery + Adjustable headband + USB-C charging cable.
NU31 Headlamp, Internal rechargeable Li-ion battery, Adjustable headband, USB-C charging cable
Made from durable PC material with an aluminium alloy front housing
High performance cost efficient.
No replaceable battery.
No, a headlamp is not a tactical device.
Power Button for on/off and adjusting brightness levels, MODE Button for switching light sources
95.5g
62.3mm
46mm
35.6mm
170g
130mm
90mm
55mm
Utilizes a primary white LED with a max output of 550 lumens
1m, limited drops
Rainproof, do not submerge.
Prominent spot with peripheral flood.
Small reflector plus small lens system. Utilizes a unibody optical lens system with various facets for reflecting a uniform and soft light.
Built-in 1800mAh Li-ion battery
None
Built-in intelligent Li-ion battery charging circuit with a USB-C charging port (5V⎓1A)
SOS, Beacon
5 brightness levels, 3 light sources, and 3 special modes available
550 lumens
5h
145m
5800cd
200 lumens
8h
90m
2300cd
60 lumens
38h
46m
640cd
50 lumens
42h
15m
58cd
6 lumens
147h
6m
10cd
5 lumens
80h
5m
10 lumens
50h
550 lumens
550 lumens
550 lumens
Nitecore HMB1 + HLB30 - a versatile accessory that serves as a helmet mount base and headlamp bracket for the Nitecore NU31.
2 year unit replacement with no support after 2 years
Designed with two buttons different in shape and touch, offering easy one-handed operation. Designed with 4 power indicators to inform the remaining battery power. Compact and lightweight.
https://nitecoresa.co.za/downloads/flyers/NiteCore_NU31.pdf
https://nitecoresa.co.za/product/nu31/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/nu31.pdf
https://www.youtube.com/watch?v=XVmA_PwpNU0&list=TLGGfzcpiU6yS1kxMjAzMjAyNA
Built-in rechargeable 1800mAh Li-ion battery
Open the USB protection cover and use the USB cable to connect an USB charging port.
The charging time is approx. 3h (charged via the 5V/1A adapter). When fully charged, the standby time is approx. 12 months.
During the charging process, 4 power indicators on the side will flash. When the battery is fully charged, 4 power indicators will stay on.
Long press the Power Button for 1 second to access MID on primary white light.
Double press the Power Button to turn on the auxiliary white light.
Long press the MODE Button for 1 second to turn on the auxiliary red light.
Long press the Power Button or MODE Button for 1 second to turn it off.
When the primary white light is on, short press the Power Button to cycle through MID, HIGH, TURBO.
When the auxiliary white light is on, short press the Power Button to switch between ULTRALOW and LOW.
When the auxiliary red light is on, short press the Power Button to switch between CONSTANT-ON and SLOW FLASHING.
When the light is on, short press the MODE Button to switch between Primary White Light, Auxiliary White Light, and Auxiliary Red Light.
When the headlamp is in any status, double press the MODE Button to access SOS.
When either special mode is on, short press the Power Button to switch between SOS and BEACON.
Double press the MODE Button again to return to the previous status.
When the headlamp is off, long press both buttons for 2 seconds until the primary white light flashes 3 times to indicate access to the Lockout Mode.
In Lockout Mode, any brightness levels or special modes are unavailable.
When in the Lockout Mode, long press both buttons for 2 seconds again until the ULTRALOW is on to indicate the unlock status.
The headlamp will be automatically unlocked when charging in the Lockout Mode.
When the light is off, short press the MODE Button, the corresponding power indicators on the side will be on in turn and go off after 2 seconds.
The battery should be recharged when the output appears to be dim or the headlamp becomes unresponsive due to low power.
As this is a sealed unit, there is not much fault-finding except to try using another USB cable and USB port to eliminate faulty cabling and charging.
Don't charge from a PC as it can go into sleep mode, and allow at least 2 hours for a full charge.
`
},
//*******************************************************************************************
{ Name: 'NU21',
Context:`
NU21
Light; Headlamp; Lightweight; Running
Nitecore
Lightweight running headlamp
NU21 Headlamp, Internal rechargeable Li-ion battery, Adjustable headband, USB charging cable
Made from durable PC material
Light Weight, can be used while charging.
Shorter runtime non removeable batteries.
No, headlamp not a tactical device
Power Button for turning on/off the light and adjusting brightness levels, MODE Button for switching light sources
44g
60mm
33mm
25.5mm
100g
85mm
85mm
50mm
max output 360Lumens
1m
Rainproof, do not submerge.
Wide angle flood, wide angle spot.
Combination lens reflector.
Built-in 500mAh Li-ion battery
None, but can be used while charging
Built-in intelligent Li-ion battery charging circuit with a USB-C charging port
SOS, Beacon
4 brightness levels, 2 light sources and 3 special modes available
360 lumens
2h
58m
840cd
170 lumens
3.5h
39m
399cd
60 lumens
8h
24m
150cd
5 lumens
26h
4.5m
5cd
6 lumens (White Light)
37h (White Light)
6m (White Light)
10cd (White Light)
10 lumens
360 lumens
360 lumens
NU27, NU31
None
2 year replacement with no support after 2 years
https://nitecoresa.co.za/downloads/flyers/NiteCore_NU21.pdf
https://nitecoresa.co.za/product/nu21/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/nu21.pdf
https://www.youtube.com/watch?v=9_jSHD7wRnY
Built-in rechargeable Li-ion battery
Uncap the charging port connect the USB cable to a USB charging port.
During the charging process, 4 power indicators on the top will flash.
When the battery is fully charged, 4 power indicators will stay on.
The charging time is approx. 1.5h (charged via the 5V/0.5A adapter).
When fully charged, the standby time is approx. 12 months.
Long press the Power Button for 1 second to access LOW.
Double press the Power Button to access ULTRALOW.
Long press the MODE Button for 1 second to turn on the Red Light.
Long press the Power Button or MODE Button for 1 second to turn it off.
When the light is on, short press the Power Button to cycle through LOW, MID, HIGH on white light.
When the Red Light is on, short press the Power Button to switch between CONSTANT-ON and SLOW FLASHING.
When the light is on, short press the MODE Button to switch between White Light and Red Light.
When the headlamp is in any status, double press the MODE Button to access SOS.
When either special mode is on, short press the Power Button to switch between SOS and BEACON.
Double press the MODE Button again to return to the previous status.
When the headlamp is off, long press both buttons for 2 seconds until the headlamp flashes 3 times to indicate access to the Lockout Mode.
In the Lockout Mode, any brightness levels or special modes are unavailable, and the headlamp will flash once to indicate this status when pressing either button.
When in the Lockout Mode, long press both buttons for 2 seconds again until the ULTRALOW is on to indicate the unlock status.
The NU21 will be automatically unlocked when charged in the Lockout Mode.
When the light is off, short press the MODE Button, and the corresponding power indicators next to the MODE Button will be on in turn and go off after 2 seconds. The battery should be recharged when the output appears to be dim or the headlamp becomes unresponsive due to low power.
`
},
{ Name: 'NU11',
Context:`
NU11
Light; Clip-on Cap Light
Nitecore
Clip-on Cap Light
NU11 Cap Light, Built-in rechargeable Li-ion battery,USB-C charging
Made from durable plastic material
Small form factor, Lightweight, low cost
No replaceable battery, shorter runtime compared to larger models.
No, a clip-on cap light is not a tactical device.
Power Button for on/off, IR Sensor Button for activating motion sensor
41g
59.1mm
50.2mm
18.7mm
N/A
N/A
N/A
N/A
Utilizes a primary white LED with a max output of 150 lumens
1m
IPX5 rated, do not submerge
Wide-angle lighting
N/A
Built-in 600mAh Li-ion battery
None
Built-in intelligent Li-ion battery charging circuit with a USB-C charging port (5V⎓1A)
Red Flashing
2 brightness levels, 2 light sources, and 1 special mode available
150 lumens
2.5h
50m
N/A
45 lumens
6h
25m
N/A
4 lumens
30h
3m
4 lumens
60h
Multipurpose Clip, Headband
1 year unit replacement with no support after 1 years
Motion Sensor Touchless Control: When the IR sensor is activated, waving a hand within 5-10cm in front of the light will turn it on or off.
Designed with 4 power indicators to inform the remaining battery power.
Compact and lightweight, 0°-90° adjustable lighting angle.
https://nitecoresa.co.za/downloads/flyers/NiteCore_NU11.pdf
https://nitecoresa.co.za/product/NU11/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/nu11.pdf
https://www.youtube.com/watch?v=4mrqUHE9xOA
Built-in rechargeable 600mAh Li-ion battery
Open the USB protection cover and use the USB cable to connect a USB charging port.
The charging time is approx. 1.5h (charged via the 5V/1A adapter).
When fully charged, the standby time is approx. 12 months.
During the charging process, 4 power indicators on the side will flash.
When the battery is fully charged, 4 power indicators will stay on.
Long press the Power Button for 1 second to turn on the light.
Double press the Power Button to activate the IR sensor.
Long press the Power Button for 1 second to turn it off.
When the light is on, short press the Power Button to cycle through HIGH and LOW.
Short press the IR Sensor Button to switch between White Light and Red Light.
When the light is in any status, double press the IR Sensor Button to access Red Flashing.
When the light is off, long press both buttons for 2 seconds until the light flashes 3 times to indicate access to the Lockout Mode.
In Lockout Mode, any brightness levels or special modes are unavailable.
When in Lockout Mode, long press both buttons for 2 seconds again until the light turns on to indicate the unlock status.
When the light is off, short press the IR Sensor Button, the corresponding power indicators on the side will be on in turn and go off after 2 seconds.
The battery should be recharged when the output appears to be dim or the light becomes unresponsive due to low power.
As this is a sealed unit, there is not much fault-finding except to try using another USB cable and USB port to eliminate faulty cabling and charging.
Don't charge from a PC as it can go into sleep mode, and allow at least 1.5 hours for a full charge.
`
},
//*******************************************************************************************
{ Name: 'UT27',
Context:`
UT27
Light; Headlamp; Running; Trail Running; Hiking
Nitecore
UT27 Headlamp + HLB1300 Rechargeable Li-ion Battery Pack (1300mAh) + Adjustable headband + USB-C charging cable
UT27 Headlamp, HLB1300 Rechargeable Li-ion Battery Pack (1300mAh), Adjustable headband, USB-C charging cable
Durable PC materials
Innovative combination of adjustable brightness spot and adjustable brightness flood with white and warm light options.
Smaller of the range
No, not a tactical device
Dual switch design for easy access to various light sources and brightness levels
56.0mm
46.6mm
32.0mm (With Bracket)
74g (With Bracket, Headband and Battery)
140g
90mm
90mm
50mm
Utilizes 2 x Luminus SST-40-W LEDs for dual white lights with a max output of 800 lumens
1m, limited drops
Medium Spot plus medium angle flood combination.
Spotlight uses the TIR optic lens for long-range lighting. Floodlight uses TrueVision Technology for an ultra-smooth flood beam.
NITECORE HLB1300 Rechargeable Li-ion Battery Pack (1300mAh)
3 x AAA batteries
Built-in intelligent Li-ion battery charging circuit with a USB-C charging port
SOS, beacon
4 brightness levels for white and warm light - Turbo, Higher, High, Mid, and Low
800 lumens
Not Specified, brightness will reduce with ATR
160m
6347cd
500 lumens
500 lumens
2.5h
2.5h
132m
124m
4373cd
3871cd
950 lumens
850 lumens
2h 30min
2h 30min
147m
57m
5400cd
820cd
280 lumens
280 lumens
5.5h
5.5h
104m
91m
2696cd
2078cd
100 lumens
100 lumens
11h
11h
63m
56m
994cd
799cd
10 lumens
20h
6m
10 lumens
40h
1.5h
1.5h
3h
3h
7h
7h
16h
32h
HLB1300 Battery
1 year replacement with no support after 1 year
Equipped with white light (Color Temperature: 6500K) and warm light (Color Temperature: 3000K).
Glow-in-the-dark battery compartment for easy battery replacement and location.
Highly efficient constant current circuit provides a stable output of up to 11 hours.
Power indicators can indicate the remaining battery power.
Advanced Power Cut-Off (APC) technology for ultra-low standby power consumption.
90° adjustable tilt angle for various lighting needs.
Includes a specially designed lightweight, skin-friendly and breathable headband, and a diffusing stuff sack.
https://nitecoresa.co.za/downloads/flyers/NiteCore_UT27.pdf
https://nitecoresa.co.za/product/ut27/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/ut27.pdf
https://www.youtube.com/watch?v=MFMBFj0hdGM
Insert/remove the HLB1300 Li-ion Battery Pack or 3 x AAA batteries according to the polarity marks and click to close the battery compartment.
Use the USB cable to connect an external power supply (e.g. a USB adapter or other USB charging devices) to the charging port to begin the charging process.
The charging time is approx. 2 hours. (Charged via the 5V/1A adapter)
During the charging process, the red indicator will turn on steadily.
When the battery pack is fully charged, the indicator will turn green steadily.
When the light is off, long press the W Button to access the white light.
When the light is off, long press the Y Button to access the warm light.
When the light is off, double-press either button to access the red light.
When the light is on, long press either button to turn it off.
When the white light is on, short press the Y Button to switch to the warm light.
When the warm light is on, short press the W Button to switch to the white light.
White Light: When the white light is on, short press the W Button to cycle through the brightness levels: WHITE LOW, WHITE MID, WHITE HIGH.
Warm Light: When the warm light is on, short press the Y Button to cycle through the brightness levels: WARM LOW, WARM MID, WARM HIGH.
Red Light: When the red light is on, short press either button to switch between CONSTANT-ON and WARNING FLASHING.
When the light is on, double press either button to access TURBO, turning on the white light and warm light.
Short press either button again to return to the previous status, or it will automatically return to the previous status if there is no operation in 30 seconds.
Lockout: When the light is off, long press both buttons until the light flashes 3 times to indicate access to the Lockout Mode.
In Lockout Mode, both buttons are unavailable to activate the headlamp, and the light will flash once to indicate this status when pressing either button.
Unlock: When in Lockout Mode, long press both buttons to unlock it and automatically access White LOW.
The headlamp will be automatically unlocked when the battery is replaced in Lockout Mode.
When the light is off, short press either button and the power indicators on the bottom will turn blue one by one and go off after 2 seconds.
Status of Indicators / Power Level:
4 Constant-on / Approx. 100%
3 Constant-on / Approx. 75%
2 Constant-on / Approx. 50%
1 Constant-on / Approx. 25%
The battery should be replaced or recharged when the output appears to be dim or the headlamp becomes unresponsive due to low power.
The thermal protection mechanism will regulate the output of the UT27 according to the working conditions and ambient environment to maintain the optimal performance.
`
},
//*******************************************************************************************
{ Name: 'BR35',
Context:`
BR35
Light; Bicycle Light;
NiteCore
Rechargeable bicycle light with dual distance beam with a maximum output of 1800 lumens.
BR35 light, pressure switch, quick link bike handlebar mount, mount pads, USB-C cable
Die cast unibody full metal housing
Power switch (M), Level Up Button (+), Level Down Button (-), pressure Switch
NONE
235g
110mm
50mm
20mm
262g
110mm
50mm
120mm
505g
210mm
160mm
50mm
2 x CREE XM-L2 U2 LEDs
1800 lumens
800 lumens for Short Range Beam, 1000 lumens for Long Range Beam
465 lumens
285 lumens
150 lumens for Short Range Beam, 180 lumens for Long Range Beam
Dual Range Beam with both short and long range beams, providing a 100° lighting angle
Uses a diffuse reflection board to illuminate the blind spot beneath with the short range beam
176 meters for Dual Beam
92m for Short Beam, 161m for Long Beam, 176m for Dual Beam
74m for Short Beam, 130m for Long Beam, 143m for Dual Beam
58m for Short Beam, 95m for Long Beam, 110m for Dual Beam
40m for Short Beam, 68m for Long Beam, 76m for Dual Beam
2100 cd for Short Beam, 6500 cd for Long Beam, 7750 cd for Dual Beam
1365 cd for Short Beam, 4200 cd for Long Beam, 5100 cd for Dual Beam
830 cd for Short Beam, 2250 cd for Long Beam, 3050 cd for Dual Beam
400 cd for Short Beam, 1150 cd for Long Beam, 1450 cd for Dual Beam
2h for Short Beam, 2h for Long Beam, 1h for Dual Beam
5h 45min for both Short and Long Beam, 2h 30min for Dual Beam
8h 30min for both Short and Long Beam, 4h for Dual Beam
17h for both Short and Long Beam, 8h for Dual Beam
Built-in 6800mAh Li-ion battery, can not be removed
None
None
https://nitecoresa.co.za/downloads/flyers/NiteCore_BR35.pdf
https://nitecoresa.co.za/product/br35/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/br35.pdf
https://www.youtube.com/watch?v=Q93fsa7DtjU&
1 year on battery, 2 year component replacement on unit, component replacement year 3-5 at partial cost to client. (see definition)
USB-C charging port, compatible with USB adapter or power supply: DC 5V 2A
Plug the USB cable into the BR35 a USB port. 2A
The blue indicator beneath the switches will blink slowly and the OLED screen will display the battery level;
The BR35 will automatically terminate charging upon charging completion, the indicator will stay on, and the battery level bar will be full.
It takes about 5 hours to fully charge the BR35.
After fully charged, the standby time is approximately 1 year.
Rainproof, do not submerge.
1m onto soft surface,
limited falls. Falls with cycles will likely cause physical damage which is not covered under warranty.
Caution strobe Light
Quick-release mounting design with included accessory kit for quick mounting and removal without any tools.
Press and hold the paddle to dismount the light from the handlebar mount.
When the light is off, press and hold the power switch (M) for about 1.5 seconds to turn on the light.
When the light is on, press and hold the power switch (M) to turn off the light.
when the light i son, tap Level Up (+) to increase brightness level up to Turbo.
Tap Level Down (-) to decrease to Low
Press and hold Level Down (-) for instant Low mode.
Press and hold Level up (+) for instant Low mode.
To switch between CITY, ROAD, and TRAIL modes:
When the light is off, hold and press the power switch (M).
The OLED screen will cycle through displaying "CITY-ROAD-TRAIL".
When the desired mode is shown, release the switch to select and activate that mode.
Designed for urban riding where the light defaults to the short-range beam.
when the light is on, Tapping the power switch(M) will turn on the long-range beam momentarily for 3 seconds.
The OLED screen will display a countdown.
The long-range beam will shut off automatically after that.
Press and hold (+) and (-) for Caution light on short beam.
Designed for road riding where the light defaults to the short-range beam.
when the light is on, Tapping the power switch(M) will switch the light to the long-range beam.
Every tapping on the power switch(M) alternates the output between the short-range beam and the long-range beam.
Press and hold (+) and (-) for Caution light on short beam.
Designed for outdoor riding where both the short-range and long-range beams are turned on simultaneously.
when the light is on, Tapping the power switch (M) once turns off the long-range beam.
Tapping the switch again to go back to the dual beams.
Press and hold (+) and (-) for Caution light on dual beams.
Onboard OLED display showing light mode, brightness level, and remaining runtime,
Versatile and powerful bicycle light with dual beams for illuminating both long and short distances.
The high 1800 lumen output provides excellent visibility on the road or trail.
Convenient operation with pressure switch and multiple modes for different scenarios.
Batteries can not be exchanged, unit does not work while charging.
`
},
//*******************************************************************************************
{ Name: 'BR25',
Context:`
BR25
Light; Flashlight; Bicycle Light
NiteCore
Cycle light with removable 21700 battery
Tube constructed from aero grade aluminum alloy with HA III military grade hard-anodized finish
150g
140mm
25mm
30mm
219g
140mm
90mm
140mm
320g
210mm
120mm
35mm
Luminus SST-40-W LED
1400 lumens, 1400 lumens brightness after a a short while due to ATR
1400 lumens, reduces 1400 lumens brightness after a a short while due to ATR
430 lumens
170 lumens
28 lumens
The integrated ATR technology regulates the output of the BR25 according to the working condition and ambient environment to maintain the optimal performance.
Wide range soft beam
163 meters
163m
91m
50m
20m
6,700cd
2,060cd
630cd
108cd
2h 30min
3h 15min
12h
Up to 60 hours
NITECORE 21700 Li-ion battery (NL2150R 5,000mAh)
Compatible with 18650 and CR123 batteries using the plastic spacer, need charger as well.
After battery insertion, the power indicator beneath the switch will flash to indicate the battery voltage.
Ensure the battery(s) is/are inserted with the positive end towards the head. The product will not work if the battery(s) is/are incorrectly inserted.
Please use the battery magazine when using 1 x 18650 / 2 x CR123 batteries to avoid battery rattling and to ensure a stable contact.
When the product is kept in a backpack or left unused for prolonged time, please remove all batteries to prevent accidental activation or battery leakage.
USB-C charging cable
Rainproof, do not submerge.
1m onto soft surface, limited falls.
Falls with cycles will likely cause physical damage which is not covered under warranty.
One side switch controls 4 brightness levels and Warning Flashing
When the light is off, long press the Power Button to turn it on.
When the light is on, long press the Power Button to turn it off.
When the light is on, short press the Power Button to cycle through the following brightness levels: LOW, MID, HIGH, TURBO.
The BR25 has mode memory. When reactivated, it will automatically access the previous memorized brightness level.
When the light is on (TURBO and Warning Flashing excluded), double press the Power Button to directly access TURBO.
Short press the Power Button again to return to the previous brightness level, or it will automatically return to
the previous brightness level if there is no operation in 30 seconds.
When the light is on, triple press the Power Button to access Warning Flashing.
Short press the Power Button again to return to the previous brightness level, or long press the Power Button to turn off the light.
The power indicator beneath the switch indicates the remaining battery voltage (±0.1V) by flashing a code.
For example: 3 pause 7 is 3.7V and 4 pause 1 is 4.1V.
None
Warning Flashing
One part of the bracket attaches to the BR25 and the other part attaches to the handlebars.
This allows for quick attachment and detachment and provides a secure hold for the flashlight during cycling
Loosen the screw of the handlebar mount and adjust the handlebar mount before clamping the mount to the handlebar by securely tightening the set screw.
Slide the bike light into the bike mount until it clicks into position.
Please use proper mount pads provided according to the diameters of the handlebar.
(34-38mm bar requires no pads; 29-35mm bar requires 2 thin pads: 25-29mm bar requires 1 thin pad and 1 thick pad; 20-25mm bar requires 2 thick pads)
Please adjust the beam angle of the bike light accordingly before clamping the mount to the handlebar to avoid affecting the oncoming vehicles.
Press and hold down the pedal on the back of the bike mount and pull out the light towards the opposite direction when mounting the light.
BR25, NL2150R 5,000mAh battery, USB-C Charging Cable, Bike Mount for BR25 (with 2 x Thin Mount Pads), 2 x Thick Mount Pads,
conversion 18650/CR123 Magazine, Spare O-ring, Lanyard
None
Cycle light that can also be used as a flaslight.
reduces 1400 lumens brightness after a a short while due to ATR
https://nitecoresa.co.za/downloads/flyers/NiteCore_BR25.pdf
https://nitecoresa.co.za/product/br25/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/br25.pdf
https://www.youtube.com/watch?v=SUHZ4GlD3RU
2 year unit replacement with no support after 2 years<
`
},
//*******************************************************************************************
{ Name: 'FSP100',
Context:`
FSP100
Foldable Solar Panel for Nitecore NES and NPS range with USB output
Nitecore
Nitecore FSP100 100W Foldable Solar Panel
Panel, integrated carry bag, integrated USB outputs, 3m charge cable for NPS200/400/600 NES1200/NES500/NES300
2800g
1430mm
580mm
25mm
2800g
340mm
290mm
7mm
3000g
330mm
330mm
110mm
8
24%
5.4A
18V
100W theoretical, expect 70W in good sunlight.
No cell may be exposed to shade as this will deplete yield.
Rotate regularly to face the sun directly.
7.9*5.5mm, USB-A x 2 (5V⎓3.1A MAX) , USB-C (5V⎓3A / 9V⎓3A / 12V⎓3A / 15V⎓3A).
8 x Hook-and-loop Fasteners
https://nitecoresa.co.za/downloads/flyers/NiteCore_FSP100.pdf
https://nitecoresa.co.za/product/fsp100/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/fsp100.pdf
https://www.youtube.com/watch?v=8MsUNIY8n8k&
Do not bend, puncture or expose the panels to corrosive liquids - Has some splash resistance but do not submerge in water or use in rain.
Do not use near heat sources.
Do not leave unattended when in use.
`
},
//*******************************************************************************************
{ Name: 'NES1200',
Context:`
NES1200
Portable Power Station
Nitecore
Nitecore NES1200 Portable Power Station
NES1200 Device, integrated li-ion batteries, 220v wall charger,
12v lighter socket charge cable, UK/RSA travel adapter for the 220v output port.
1252.8Wh (21.6V, 58Ah)
18650 Li-ion Batteries
348000mAh
12V-36V, up to 10A 180W max
5V⎓3A / 9V⎓3A / 12V⎓3A / 15V⎓3A / 20V⎓5A 100W max per port
220V~6A 50Hz, Pure Sine Wave
1100W max continuous
2100W surge momentarily
12V⎓10A 120W max
5V⎓3A / 9V⎓2A / 12V⎓2A / 20V⎓1.5A 30W max per port
5V⎓3A / 9V⎓3A / 12V⎓3A / 15V⎓3A / 20V⎓5A 100W max per port
Charge every 3 months
500 cycles to 80% (discharge rate: 1C, full charge/discharge, Temp 25°C)
-10 to 40°C (14~104°F)
10.65kg (23.48lbs)
317mm (12.48")
214mm (8.43")
282.5mm (11.12")
12kg
380mm
460mm
380mm
The NES1200 can be charged via the following methods:
AC Wall Charger (includes AC adapter and power cord), charge at a maximum of 135W
Car Charger (12V/24V lighter socket cable included), charge at a maximum of 100W
Solar Panel (compatible Nitecore solar panels, purchased separately), charge at a maximum of 75W
USB-C Power Delivery (100W USB Charger, purchased separately), charge at a maximum of 100W per USB-C port
To charge via AC wall outlet:
Connect the AC adapter to the power cord.
Plug the AC adapter into the NES1200 DC input port.
Plug the power cord into an AC wall outlet.
Charging will begin automatically at a maximum of 135W
Approx. 9.5h to fully charge from 0% to 100%
To charge from a 12V/24V car outlet:
Plug the car charger cable into the NES1200 DC input port
Plug the other end into the 12V/24V lighter socket in your car
Charging will begin automatically when car is running at a maximum of 100W
Approx. 13h to fully charge from 0% to 100%
To charge from a compatible Nitecore solar panel FSP100:
Connect the solar panel's output cable to the NES1200 DC input port
Position the solar panel in direct sunlight with no shade.
Charging will begin automatically at a maximum of 75W
Approx. 2 sun days to fully charge from 0% to 100% as sun will ikely not sustain 75W during the entire day .
To charge from a compatible 100W USB-C charger:
Plug the USB-C to USB-C cable into the NES1200 USB-C input port
Plug the other end into a compatible 100W USB-C wall charger or power source
Charging will begin automatically at a maximum of 100W per USB-C port
Approx. 13h to fully charge from 0% to 100% with 1 USB-C port
Approx. 7h to fully charge from 0% to 100% with 2 USB-C ports
FSP100 optional, High end 100w USB adapter optional
https://nitecoresa.co.za/downloads/flyers/NiteCore_NES1200.pdf
https://nitecoresa.co.za/product/nes1200/
https://charger.nitecore.com/Uploads/FLASHLIGHTS/download/nes1200.pdf
https://www.youtube.com/watch?v=J8YpZfXpWQs&
High capacity 1200Wh battery pack for extended off-grid power.
Multiple output options (AC, DC, USB) to power a wide range of devices.
Pure sine wave AC output compatible with sensitive electronics.
High 1100W continuous AC output and 2200W surge capability.
Can be recharged from wall, car, solar or USB-C PD sources.
Portable for short distances.
High cost compared to smaller capacity power stations.
No automatic UPS functionality, has to be manually switched on to provide power.
Fairly long charging times of 8+ hours from standard AC or 12V sources.
What is the total usable capacity of the NES1200 after accounting for losses?
How much usable power does the NES1200 provide after subtracting self-consumption?
Considering operational inefficiencies, what is the effective power capacity of the NES1200?
Factoring in self-consumption and conversion losses,
the NES1200 provides approximately 1000 Watt-hours of usable power from a full charge to depletion.
The exact usable capacity may vary slightly based on usage conditions and battery age.
Is the NES1200 powerful enough to run high-wattage appliances like microwaves?
Can the NES1200 handle the surge power demands of power tools and kitchen appliances?
What types of demanding electrical loads is the NES1200 capable of supporting?
Maybe, the NES1200's pure sine wave AC inverter can provide up to 1100W of continuous power and 2200W of surge power.
This is sufficient for running most countertop appliances like blenders, inverter based microwaves, as well as some entry level power tools.
As long as the peak and continuous wattage of the device is under the NES1200's output ratings, it should be able to power it.
How long will the NES1200 power my 200W CPAP machine?
With a 200W continuous draw and 1000Wh of usable capacity, the NES1200 could power a 200W CPAP machine for approximately 5+ hours on a full charge.
How many times can the NES1200 charge my iPhone 12 Pro?
The NES1200's 1000Wh capacity is enough to recharge an iPhone 12 Pro around 90 times.
If I connect a 1500W appliance to the NES1200, will it provide power?
No, the NES1200 will not power a 1500W device. Its AC output is limited to 1100W maximum continuous power draw.
Attempting to run devices exceeding 1100W will cause the AC output to shut off to protect the inverter from overload.
What is the fastest way to recharge the NES1200?
The quickest way to charge the NES1200 is by using two 100W USB-C PD chargers connected to the unit's USB-C input ports or 1 AC aapter and a 100W USB-C PD.
This allows it to charge at a maximum combined rate of 180W, fully recharging the power station in approximately 7 hours.
Charging from a standard AC wall outlet maxes out at 100W and takes around 8.5 hours for a full charge.
Can the NES1200 be used while it is recharging?
Yes, the NES1200 supports pass-through charging, meaning you can use it to power devices while it is plugged in and recharging its battery.
However, if the power draw from connected devices exceeds the input charging rate, the battery will still deplete, just at a slower rate than if it wasn't plugged in.
Is it possible to use the NES1200 as an Uninterruptible Power Supply (UPS)?
No, the NES1200 does not have an automatic UPS function.
It cannot be set up inline between an outlet and device to provide automatic emergency backup power in the event of a blackout.
The unit has to be manually switched on to power devices from its internal battery.
While it can provide temporary power during an outage, it will not seamlessly take over if utility power fails.
How should I store and maintain the NES1200 if I only use it occasionally?
For proper long-term storage of the NES1200:
Fully charge the battery before putting it into storage.
Keep it in a cool, dry place at room temperature, avoiding exposure to extreme heat or cold.
Recharge the battery to full at least once every 3-6 months to prevent over-discharge.
Following these steps will maximize the battery's health and lifespan.
If the NES1200 is not responding, not supplying power to connected devices, or encountering other issues:
Check that the unit's battery has sufficient charge and isn't depleted. Recharge it if the battery is low.
Verify that the AC or DC output ports are turned on after the main power button is switched on.
Check that the connected devices don't exceed the maximum supported wattage for the output port.
Unplug any connected devices and turn the NES1200 fully off, then back on to reset it.
If the issue persists, contact Nitecore Support for further troubleshooting.
`
},
//*******************************************************************************************
{ Name: 'NES500',
Context:`
NES500
Portable Power Station
Nitecore
Nitecore NES500 Portable Power Station
NES500 Device, integrated li-ion batteries, 220v wall charger,
12v lighter socket charge cable, UK/RSA travel adapter for the 220v output port.
518Wh (10.8V, 48Ah)
18650 Li-ion Batteries
144000mAh
14.4V-26V, up to 10A (160W max)
220V~2.27A 50Hz, Pure Sine Wave
450W max continuous
900W surge momentarily
12V⎓10A (120W max)
5V⎓2.4A (12W max each port)
5V⎓3A / 9V⎓3A / 12V⎓3A / 15V⎓3A / 20V⎓3A (60W max)
Charge every 3-6 months
500 cycles to 80% (discharge rate: 1C, full charge/discharge, Temp 25°C)
-10 to 40°C (14~104°F)
5.65kg
262mm
237mm
154mm
7kg
350mm
280mm
280mm
The NES500 can be charged via the following methods:
AC Wall Charger (includes AC adapter and power cord), charge at a maximum of 65W
Car Charger (12V lighter socket cable included), charge at a maximum of 65W
Solar Panel (compatible Nitecore solar panels, purchased separately), charge at a maximum of 75W
To charge via AC wall outlet:
Connect the AC adapter to the power cord.
Plug the AC adapter into the NES500 DC input port.
Plug the power cord into an AC wall outlet.
Charging will begin automatically at a maximum of 65W.
Approx. 8 hours to fully charge from 0% to 100%
To charge from a 12V car outlet:
Plug the car charger cable into the NES500 DC input port.
Plug the other end into the 12V lighter socket in your car.
Charging will begin automatically when car is running at a maximum of 65W.
Approx. 8 hours to fully charge from 0% to 100%
To charge from a compatible Nitecore solar panel FSP100:
Connect the solar panel's output cable to the NES500 DC input port.
Position the solar panel in direct sunlight.
Charging will begin automatically at a maximum of 75W.
Approx. 8+ hours to fully charge from 0% to 100% under ideal sunlight conditions.
AC Adapter, Power Cord, Car Charger
https://nitecoresa.co.za/downloads/flyers/NiteCore_NES500.pdf
https://nitecoresa.co.za/product/nes500/
https://charger.nitecore.com/Uploads/FLASHLIGHTS/download/nes500.pdf
https://www.youtube.com/watch?v=-D46gM1nUTQ&
Larger 518Wh capacity for extended mobile power.
High 450W continuous AC output and 1000W surge handles more demanding devices.
Pure sine wave AC for safe operation of sensitive electronics.
Multiple charging options - AC, 12V car, or solar.
Compact, all-in-one portable power solution.
No USB-C PD high speed charging input/output.
Relatively slow 65W max AC charging speed.
No automatic UPS functionality, has to be manually switched on to provide power.
What is the total usable battery capacity of the NES500?
What is the effective Watt-hour capacity of the NES500 after efficiency losses?
After accounting for energy conversion, what usable capacity does the NES500 provide?
The NES500 has a rated capacity of 518 Watt-hours (Wh).
Accounting for inverter and conversion efficiency, expect approximately 450-470 usable Watt-hours available to power your devices.
How many times can the NES500 recharge a smartphone?
Approximately how many full charges can a standard smartphone receive from the NES500?
How often can the NES500 recharge an average smartphone from 0% to 100%?
The NES500's 518Wh capacity can recharge a typical 4000mAh smartphone battery around 50 times before depleting.
What types of devices can the NES500 power with its AC outlet?
Can the NES500 supply power to household AC devices?
What is the range of AC-powered devices compatible with the NES500?
The NES500 can power a wide range of AC devices under 500W, such as laptops, tablets, drone batteries, small appliances, CPAP machines, and more.
It also supports brief surges up to 1000W to start certain motors and compressors in things like mini fridges or power tools.
How long will a 50W device run from the NES500?
For how many hours can the NES500 power a device that requires 50 Watts?
What is the runtime for a 50W appliance when connected to the NES500?
Using the NES500's approximate 470Wh usable capacity, a 50W device would run for about 9.4 hours on a full charge (470Wh / 50W).
Can I use the NES500 while it's recharging?
Is it possible to utilize the NES500 for powering devices during its charging cycle?
Can the NES500 be used simultaneously while it is being charged?
Yes, but charging power is typically lower than consumption power.
Is the NES500 suitable for CPAP use?
Does the NES500 offer sufficient power for running a CPAP machine?
For CPAP devices, is the NES500 a reliable power source?
We recommend the larger NES1200 for mission critical uses.
How fast does the NES500 charge from AC power?
What is the charging duration of the NES500 when connected to AC power?
How long does it take to fully charge the NES500 using an AC power source?
The NES500 has a maximum AC charging rate of 65W. At this speed, it will take approximately 8-10 hours to fully recharge if starting from a fully depleted state.
What kind of battery cells does the NES500 use?
What type of battery technology is employed in the NES500?
What battery technology does the NES500 utilize for energy storage?
The NES500 uses high quality Lithium-Ion 18650 battery cells, similar to those used in electric vehicles. This battery chemistry provides excellent energy density, lifecycle durability, and safety.
If you are experiencing issues with the NES500, try these troubleshooting steps:
Verify the unit has sufficient battery charge. Recharge it if the battery display is low or depleted.
Check that the connected devices are compatible and do not exceed the port's maximum output rating. Disconnect any devices that are not working.
If the AC output is not working, confirm it is turned on and that the connected device does not exceed 500W continuous or 1000W surge.
If charging seems slow, ensure you are using the proper charging cables and adapters that can support up to 65W. Using lower power chargers will result in slower charging speeds.
If the unit becomes unresponsive, try a force reset by holding the main power button for 20 seconds to cycle power.
Should issues persist, please email us for further assistance.
`
},
//*******************************************************************************************
{ Name: 'NPS400',
Context:`
NPS400
li-ion 220v Portable Power Station
Nitecore
Nitecore NPS400 Portable Power Station
NPS400 Device, integrated li-ion batteries, 220v wall charger,
12v lighter socket charge cable, UK/RSA travel adapter for the 220v output port.
421Wh(10.8V, 39Ah) (370Wh real life)
18650 Li-ion Batteries
117000mAh
14.4V-26V, up to 10A (160W max)
220V~1.36A 50Hz, Pure Sine Wave
280W max continuous
600W surge momentarily
12V⎓ less than 10A 120W
5V⎓2.4A 12W max each port
5V⎓2.4A / 9V⎓2A 18W max
5V⎓3A / 9V⎓3A / 12V⎓3A / 15V⎓3A / 20V⎓3A 60W max
Charge every 3 months
500 cycles to 80% (discharge rate: 1C, full charge/discharge, Temp 25°C)
5.68kg
244mm
187.7mm
157.3mm
5.68kg
244mm
187.7mm
157.3mm
The NPS400 can be charged via the following methods:
AC Wall Charger (includes AC adapter and power cord), slow charge at a maximum of 65W
Car Charger (12V lighter socket cable included), slow charge at a maximum of 65W
Solar Panel (compatible Nitecore solar panels, purchased separately), slow charge at a maximum of 75W
To charge via AC wall outlet: 1. Connect the AC adapter to the power cord
Plug the AC adapter into the NPS400 AC input port 3.
Plug the power cord into a AC wall outlet
Charging will begin automatically at a maximum of 65W
To charge from a 12V car outlet:
Plug the car charger cable into the NPS400 DC input port
Plug the other end into the 12V lighter socket in your car
Charging will begin automatically when car is running at a maximum of 65W
To charge from a compatible Nitecore solar panel:
Connect the solar panel's output cable to the NPS400 DC input
Position the solar panel in direct sunlight
Charging will begin automatically at a maximum of 75W
AC Adapter, Power Cord, Car Charger
https://nitecoresa.co.za/downloads/flyers/NiteCore_NPS400.pdf
https://nitecoresa.co.za/product/nps400/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/nps400.pdf
https://www.youtube.com/watch?v=NPfWMyeIjLc&
Portable power source for off-grid situations
Multiple output options (AC, DC, USB) to power various devices
High capacity 420Wh battery pack
Can be recharged from wall, car or solar sources
Pure sine wave AC output compatible with sensitive electronics
Requires separate charging before use, no automatic UPS functionality so i cannot be used connected inline between wall and device.
Limited runtime for high-wattage devices.
Maximum 300W AC output may be insufficient for large applications
What is the total usable capacity of the NPS400 after accounting for losses?
How much usable power does the NPS400 provide after subtracting self-consumption?
Considering operational inefficiencies, what is the effective power capacity of the NPS400?
Conservatively speaking, a fully charged NPS400 has a total real life usable capacity of 350Wh,
taking into account self-consumption and other factors.
Is it possible to operate a 1000W microwave with the NPS400?
Can the NPS400 support the energy demands of a 2000W kettle?
Are high-wattage devices like hairdryers compatible with the NPS400's output capacity?
No, the NPS400 cannot power high-wattage appliances such as 1000W microwaves
or 2000W kettles since their consumption exceeds the highest output capacity of the NPS400.
What impact does a device's wattage have on its runtime with the NPS400?
How does intermittent device operation affect battery drain on the NPS400?
In terms of power consumption, what should be considered to maximize the NPS400's battery life?
The runtime of a device when powered by the NPS400 varies depending on the actual power draw of the device.
Devices with higher wattage will drain the battery faster.
It's recommended to check the actual power consumption of your devices to estimate runtimes more accurately.
But in all cases wattage must be below maximum continuous OUTPUT POWER.>
What key factors influence the estimated runtime on the NPS400?
How should one calculate the expected battery life of the NPS400 for various devices?
What considerations are important for accurately predicting how long the NPS400 will power a device?
To accurately estimate the runtime of devices powered by the NPS400,
it's important to consider the actual power draw of the connected devices and whether they are running continuously or with breaks.
Higher wattage devices will drain the battery faster.
Therefore runtime = WattHour rating devided by average watts consumed per hour.
What adjustments can extend the viewing time of an LCD TV powered by the NPS400?
How can energy efficiency be improved when using the NPS400 to power a television?
What strategy can significantly increase the runtime of electrical appliances like TVs when connected to the NPS400?
The runtime of a 70W LCD Television can be significantly extended by reducing the brightness, as lower power consumption will drain the NPS400 battery at a slower rate.
Could you list some examples of device runtimes when powered by the NPS400?
What are some examples of how long different devices can run on the NPS400?
Can you share some specific runtime examples for devices using the NPS400's power capacity?
The NPS400 has a total real life usable capacity of 350Wh when fully charged if you deduct self consumption and other factors.
Here are some examples of typical device runtimes:
40W CPAP machine: Around 8.75 hours
15W laptop: Around 23 hours
10W LED light: Around 35 hours
5W phone charger: Around 70 hours
100W refrigerator: Around 3.5 hours
70W LCD Television: Around 5 hours (Reducing brightness will extend runtime significantly)
1000W microwave: Since the consumption exceeds the highest output, the microwave will not run at all.
2000W Hairdryer: Since the consumption exceeds the highest output, the hairdryer will not run at all.
2000W Kettle: Since the consumption exceeds the highest output, the kettle will not run at all.
The runtimes will vary depending on the actual power draw of the connected devices and whether they are running continuously or with breaks.
Higher wattage devices will drain the battery faster.
It's recommended to check the actual power consumption of your devices to estimate runtimes more accurately.
How long does it take to fully charge the NPS400 using various charging options?
Can you outline the charging durations for the NPS400 with different charging techniques?
What are the different charging times for the NPS400 based on the method of charging used?
The approximate charge times for the NPS400 with its 420Wh capacity are:
AC Wall Charger: up to 7 hours to fully charge from 0% to 100%
12V Car Charger: up to 7 hours to fully charge from 0% to 100%
75W Solar Panel: 1 or more sun days hours to fully charge from 0% to 100% as the yield from the sun will likely not be at max the entire day.
These times assume charging from a fully depleted battery.
Charging from a partially charged state will take less time proportionately.
The charge times can vary slightly depending on factors like temperature, charging current fluctuations, and battery health over time.
Can the NPS400 be used as an uninterruptible power supply (UPS)?
No, the NPS400 is not designed to function as a UPS device.
It does not provide automatic backup power like a UPS in the event of a power outage.
Once charged, the NPS400 needs to be switched on manually to supply AC/DC power to connected devices.
The NPS400 cannot be connected inline between a power source and the devices being powered on a permanent basis.
It has to be charged separately first, then switched on to provide power from its internal battery.
It is primarily designed as a portable power station to run devices when no other power source is available
although it can charge at 65w while being used.
So the NPS400 does not offer uninterrupted backup power capabilities.
In case of freezes or malfunctions where the NPS400 becomes unresponsive:
The device needs to be switched off using the front panel buttons.
Open the bottom panel. Locate the two red wires.
Disconnect both red wires from the board temporarily.
Wait 30 seconds, then reconnect the red wires to reset the system.
Dont fiddle around inside to prevent getting shocked.
Close the bottom panel and power on the NPS400.
If this reset procedure does not resolve the issue, please email us.
`
},
//*******************************************************************************************
{ Name: 'NPS200',
Context:`
NPS200
Portable Power Station
Nitecore
Nitecore NPS200 Portable Power Station
NPS200 Device, integrated li-ion batteries, 220v wall charger,
12v lighter socket charge cable, UK/RSA travel adapter for the 220v output port.
196.56Wh (10.8V, 18.2Ah)
18650 Li-ion Batteries
54600mAh
14.4V-26V, up to 10A (65W max)
220V~0.68A 50Hz, Pure Sine Wave
65W max continuous
300W surge momentarily
12V⎓ less than 10A 120W
12V⎓ less than 10A 120W
5V⎓2.4A 12W max each port
5V⎓2.4A / 9V⎓2A 18W max
5V⎓3A / 9V⎓3A / 12V⎓3A / 15V⎓3A / 20V⎓3A 60W max
Charge every 3 months
500 cycles to 80% (discharge rate: 1C, full charge/discharge, Temp 25°C)
-10 to 40°C (14~104°F)
3.35kg
209mm
156.3mm
137.3mm
4.5kg
230mm
200mm
200mm
The NPS200 can be charged via the following methods:
AC Wall Charger (includes AC adapter and power cord), slow charge at a maximum of 65W
Car Charger (12V lighter socket cable included), slow charge at a maximum of 65W
Solar Panel (compatible Nitecore solar panels, purchased separately), slow charge at a maximum of 75W
To charge via AC wall outlet: Connect the AC adapter to the power cord.
Plug the AC adapter into the NPS200 AC input port.
Plug the power cord into a AC wall outlet.
Charging will begin automatically at a maximum of 65W
To charge from a 12V car outlet:
Plug the car charger cable into the NPS200 DC input port.
Plug the other end into the 12V lighter socket in your car.
Charging will begin automatically when car is running at a maximum of 65W.
To charge from a compatible Nitecore solar panel:
Connect the solar panel's output cable to the NPS200 DC input
Position the solar panel in direct sunlight with no shade.
Charging will begin automatically at a maximum of 75W
AC Adapter, Power Cord, Car Charger
https://nitecoresa.co.za/downloads/flyers/NiteCore_NPS200.pdf
https://nitecoresa.co.za/product/nps200/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/nps200.pdf
https://www.youtube.com/watch?v=NPfWMyeIjLc&
Portable power source for off-grid situations.
Multiple output options (AC, DC, USB) to power various devices.
Compact 196Wh battery pack.
Can be recharged from wall, car or solar sources.
Pure sine wave AC output compatible with sensitive electronics.
Requires separate charging before use,
no automatic UPS functionality so it cannot be used connected inline between wall and device.
Limited runtime for high-wattage devices.
Maximum 150W AC output may be insufficient for large applications
What is the total usable capacity of the NPS200 after accounting for losses?
How much usable power does the NPS200 provide after subtracting self-consumption?
Considering operational inefficiencies, what is the effective power capacity of the NPS200?
Conservatively speaking, a fully charged NPS200 has a total real life usable capacity of 160Wh,
taking into account self-consumption and other factors.
Is it possible to operate a 1000W microwave with the NPS200?
Can the NPS200 support the energy demands of a 2000W kettle?
Are high-wattage devices like hairdryers compatible with the NPS200's output capacity?
No, the NPS200 cannot power high-wattage appliances such as 1000W microwaves
or 2000W kettles since their consumption ffar exceeds the highest output capacity of the NPS200.
What impact does a device's wattage have on its runtime with the NPS200?
How does intermittent device operation affect battery drain on the NPS200?
In terms of power consumption, what should be considered to maximize the NPS200's battery life?
The runtime of a device when powered by the NPS200 varies depending on the actual power draw of the device.
Devices with higher wattage will drain the battery faster.
It's recommended to check the actual power consumption of your devices to estimate runtimes more accurately.
But in all cases wattage must be below maximum continuous OUTPUT POWER.>
What key factors influence the estimated runtime on the NPS200?
How should one calculate the expected battery life of the NPS200 for various devices?
What considerations are important for accurately predicting how long the NPS200 will power a device?
To accurately estimate the runtime of devices powered by the NPS200,
it's important to consider the actual power draw of the connected devices and whether they are running continuously or with breaks.
Higher wattage devices will drain the battery faster.
Therefore runtime = WattHour rating devided by average watts consumed per hour.
What adjustments can extend the viewing time of an LCD TV powered by the NPS200?
How can energy efficiency be improved when using the NPS200 to power a television?
What strategy can significantly increase the runtime of electrical appliances like TVs when connected to the NPS200?
The runtime of a 70W LCD Television can be significantly extended by reducing the brightness,
as lower power consumption will drain the NPS200 battery at a slower rate.
Could you list some examples of device runtimes when powered by the NPS200?
What are some examples of how long different devices can run on the NPS200?
Can you share some specific runtime examples for devices using the NPS200's power capacity?
The NPS200 has a total real life usable capacity of 160Wh when fully charged if you deduct self consumption and other factors.
Here are some examples of typical device runtimes:
40W CPAP machine: Around 4 hours
15W laptop: Around 10.6 hours
10W LED light: Around 16 hours
5W phone charger: Around 32 hours
100W refrigerator: Around 1.6 hours
70W LCD Television: Around 2.3 hours (Reducing brightness will extend runtime significantly)
1000W microwave: Since the consumption exceeds the highest output, the microwave will not run at all.
2000W Hairdryer: Since the consumption exceeds the highest output, the hairdryer will not run at all.
2000W Kettle: Since the consumption exceeds the highest output, the kettle will not run at all.
The runtimes will vary depending on the actual power draw of the connected devices and whether they are running continuously or with breaks.
Higher wattage devices will drain the battery faster.
It's recommended to check the actual power consumption of your devices to estimate runtimes more accurately.
How long does it take to fully charge the NPS200 using various charging options?
Can you outline the charging durations for the NPS200 with different charging techniques?
What are the different charging times for the NPS200 based on the method of charging used?
The approximate charge times for the NPS200 with its 196Wh capacity are:
AC Wall Charger: up to 3.5 hours to fully charge from 0% to 100%
12V Car Charger: up to 3.5 hours to fully charge from 0% to 100%
75W Solar Panel: 1 sun days to fully charge from 0% to 100% as the yield from the sun will likely not be at max the entire day.
These times assume charging from a fully depleted battery.
Charging from a partially charged state will take less time proportionately.
The charge times can vary slightly depending on factors like temperature, charging current fluctuations, and battery health over time.
Can the NPS200 be used as an uninterruptible power supply (UPS)?
No, the NPS200 is not designed to function as a UPS device.
It does not provide automatic backup power like a UPS in the event of a power outage.
Once charged, the NPS200 needs to be switched on manually to supply AC/DC power to connected devices.
The NPS200 cannot be connected inline between a power source and the devices being powered on a permanent basis.
It has to be charged separately first, then switched on to provide power from its internal battery.
It is primarily designed as a portable power station to run devices when no other power source is available
although it can charge at 65w while being used.
So the NPS200 does not offer uninterrupted backup power capabilities.
In case of freezes or malfunctions where the NPS200 becomes unresponsive:
The device needs to be switched off using the front panel buttons.
Open the bottom panel. Locate the two red wires.
Disconnect both red wires from the board temporarily.
Wait 30 seconds, then reconnect the red wires to reset the system.
Dont fiddle around inside to prevent getting shocked.
Close the bottom panel and power on the NPS200.
If this reset procedure does not resolve the issue, please email us.
`
},
//*******************************************************************************************
{ Name: 'NB20000',
Context:`
NB20000
Portable Power Bank
Nitecore
Ultra Compact and Lightweight Portable Power Bank.
Sealed power bank including battery, USB Cable
20000mAh at 3.85V (77Wh), 13500mAh at 5V (TYP 2A)
Li-ion
5V⎓2.4A / 9V⎓2A / 12V⎓1.5A (18W MAX)
5V⎓2.4A / 9V⎓3A / 12V⎓2.5A / 15V⎓2A / 20V⎓1.5A (30W MAX)
5V⎓2.4A / 9V⎓3A / 12V⎓3A / 15V⎓3A / 20V⎓2.25A (45W MAX)
5V⎓2.4A / 9V⎓2A / 12V⎓1.5A
5V⎓3A (MAX)
IPX5
324.5g 136.3mm 60mm 21.4mm
427.5g
180mm
95mm
30mm
USB Charging Cable (USB-A to USB-C)
Recharge every 3 months when left unused
-10 to 40°C (14~104°F)
https://nitecoresa.co.za/downloads/flyers/NiteCore_NB20000.pdf
https://nitecoresa.co.za/product/nb20000/
https://charger.nitecore.com/Uploads/FLASHLIGHTS/download/nb20000.pdf
https://www.youtube.com/watch?v=66qTAubRmKw
18 months with no additional support after that
The NB20000 has 4 blue indicators that display the charging status and power level. Short press the Mode Button to turn on the blue indicators and display the power level as follows: 4 Indicators Constant-on: Approx. 100% power 3 Indicators Constant-on: Approx. 75% power 2 Indicators Constant-on: Approx. 50% power 1 Indicator Constant-on: Approx. 25% power 1 Indicator Flashing: Nearly depleted, recharge. The NB20000 will enter hibernation mode when there is no input/output for a while. During charging, the blue indicators will flash to show the power level from 1 to 4. All 4 blue indicators will be constant-on when fully charged. Suitable for charging low current devices like wireless headphones and wearables. Double press the Mode Button to turn on the white indicator and enter Low Current Mode. Press the Mode Button again to exit Low Current Mode. Exit Low Current Mode once low current charging is finished. Built-in thermal protection module. When output reaches 45W, it may automatically stop output due to thermal protection. Output will automatically resume once temperature decreases. Supports simultaneous input and output. When being charged via USB-C (INPUT) port, it can charge devices via USB-A (OUT2/OUT3) ports. Charging will be delayed. The USB-C (IN/OUT1) port does not support this function. High capacity device that can charge most smartphones around 3-4 times. Ultra compact and lightweight design for easy portability. Fast charging capability with up to 45W USB-C output. Supports low current mode for safely charging small devices like wireless earbuds. Allows simultaneous charging of devices while the power bank itself is being charged. Higher capacity makes it more expensive than lower capacity power banks. Larger than smaller capacity power banks at 324.5g. Can I take the NB20000 on an airplane? Is the NB20000 allowed on flights? Can I bring the NB20000 power bank on a plane? The NB20000 has a rated capacity of 77Wh which is under the 100Wh limit for power banks allowed on airplanes. It complies with UN38.3 standards for air travel and can be carried in hand luggage. We also recommend you place it in hand luggage. Keep in mind that Airline policies can change.
How many times can the NB20000 recharge a smartphone?
What is the recharge capability of the NB20000 for a typical smartphone?
How many full charges can a smartphone get from the NB20000?
The NB20000 has a 13500mAh capacity at 5V USB output which can recharge a typical 4000mAh
smartphone battery around 3 times, accounting for energy transfer losses.
Give typical examples of what devices can be recharged how many times?
How many times can various devices be recharged by the NB20000?
What is the recharge capability of the NB20000 for different devices?
iPhone 13 Pro: Around 4 full charges
iPhone 11 (typical 3000mAh battery): Around 4 full charges
Huawei P30 (typical 3600mAh battery): Around 3.5 full charges
NU32 headlamp: Around 8 full charges
Huawei P50: Around 3 full charges
Typical wireless headphones: Around 18 full charges
What is the purpose of the Low Current Mode?
Why does the NB20000 have a Low Current Mode?
What is the function of the Low Current Mode on the NB20000?
The Low Current Mode lowers the output current to safely and efficiently charge
small devices like wireless earbuds, smartwatches, fitness trackers, and other low-power
accessories. These devices may not charge properly under the normal high-current output.
Can I charge the NB20000 while simultaneously using it to charge another device?
Is it possible to charge the NB20000 and another device at the same time?
Can the NB20000 be used as a power source while being charged?
Yes, the NB20000 supports simultaneous input and output.
When it is being charged via the USB-C (INPUT) port, it can charge external devices through the USB-A (OUT2/OUT3) ports.
However, the USB-C (IN/OUT1) port does not support this pass-through charging function.
If you encounter issues with the NB20000, try these steps: Check the remaining power level. Recharge if indicators show low or flashing power. Try a different USB cable and port on the NB20000. For low-power devices, ensure Low Current Mode is activated. Confirm your device is not drawing over 3A, as the NB20000 may shut off if overloaded. If the mode button was held down for long, the power bank may enter a hidden hibernation mode. Charge it for over 10 minutes to exit this mode. Tap the mode button to switch it on after connecting a device. If problems persist, email us for further assistance.
`
},
//*******************************************************************************************
{ Name: 'NB10000',
Context:`
NB10000, B10000Gen2, NB10000 Gen2, NB10000 Generation2
Portable Power Bank
Nitecore
Small size NB10000 Portable Power Bank with USB and USB-C
lightweight Carbon fiber reinforced polymer
Sealed power bank including battery, USB Cable
10000mAh Li-Po at 3.85V storage (38.5Wh) and 6400mAh at 5V USB output
257mWh/g
Li-Po
226g
170mm
95mm
20mm
5V⎓2.4A / 9V⎓2A
5V⎓3A / 9V⎓2.22A / 12V⎓1.68A
5V⎓3A / 9V⎓2A / 12V⎓1.5A
5V⎓3A (MAX)
If the powerbank does not wake up automatically when a device is plugged in,
press the mode button on the power bank to turn it on.
Holding the mode button will cause it to go into low current mode.
When not used, the powerbank will switch off automatically.
Press and hold the Mode Button to turn on the white indicator and access Low Current Mode.
This mode is suitable for charging low current devices including wireless headphones, wearables and more.
Press and hold the Mode Button again to turn off the white indicator and exit Low Current Mode.
(It is recommended to exit Low Current Mode once the low current charging process is finished.)
IPX5, should not get wet
150g
121.9mm
60mm
10.6mm
226g
170mm
95mm
20mm
USB Charging Cable (USB-A to USB-C)
Charge every 3 months when left unused
-10 to 40°C (14~104°F)
The 3 small blue LEDs display the charging status and power level while the small white LED indicates Low Current Mode.
Short press the Mode Button, and the blue indicators will be turned on to display the power level.
The NB10000 needs to get recharged when the last blue indicator flashes to indicate a low power level.
It will automatically access the hibernation status when there is no input or output for a while.
The 4 rows map the indicator patterns to power levels as follows:
3 blue lights constant-on: Approx. 100% power remaining.
2 blue lights constant-on: Approx. 70% power remaining.
1 blue light constant-on: Approx. 30% power remaining.
1 blue light flashing: Nearly depleted power level.
During the charging process, the blue indicators will flash to indicate the power level.
All 3 blue indicators will be turned on steadily when it is fully charged.
https://nitecoresa.co.za/downloads/flyers/NiteCore_NB20000.pdf
https://nitecoresa.co.za/product/nb10000gen2/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/nb10000.pdf
https://www.youtube.com/watch?v=66qTAubRmKw
18 months with no additional support after that
More compact and lightweight than competing power banks.
Well made.
Supports USB-C and USB-A output for charging various devices.
Low Current Mode for charging small wearables and wireless headphones.
Can be used as a small USB UPS, plugged in while being used.
Limited storage capacity. 10000mAh at 3.85V (38.5Wh) and 6400mAh at 5V USB output.
Can I take the NB10000 on an airplane?
Is the NB10000 allowed on flights?
Can I bring the NB10000 power bank on a plane?
In compliance with the UN38.3 Standard with a rated capacity less than 100Wh, the NB10000 power bank is approved for air travel and can be safely carried onto airplanes.
We recommend taking it on with hand luggage to avoid complications with the airline.
Keep in mind that an airline can change policies at any time.
How many times can the NB10000 recharge a smartphone?
What is the recharge capability of the NB10000 for a typical smartphone?
How many full charges can a smartphone get from the NB10000?
The NB10000's 6400mAh at 5V USB output capacity can recharge a typical 4000mAh smartphone battery around 1.5 times before depleting,
accounting for energy transfer losses.
Give typical examples of what devices can be recharged how many times?
How many times can various devices be recharged by the NB10000?
What is the recharge capability of the NB10000 for different devices?
iPhone 13 Pro around 2 charges.
iPhone 11 (typical battery ~3000mAh) around 2 charges.
Huawei P30 (typical battery ~3600mAh) around 1.5 full charges.
NU31 headlamp around 4 full charges.
Huawei P50 around 1.5 charges.
Typical wireless headphones can get around 9 full charges.
What is the purpose of the Low Current Mode?
Why does the NB10000 have a Low Current Mode?
What is the function of the Low Current Mode on the NB10000?
Lowers the output current to allow safe and efficient charging of small devices like wireless earbuds,
smartwatches, fitness trackers, and other low-power accessories that may not charge properly under normal high-current output.
Can I charge the NB10000 while simultaneously using it to charge another device?
Is it possible to charge the NB10000 and another device at the same time?
Can the NB10000 be used as a power source while being charged?
Yes, for low current draw devices only.
If you encounter issues with the NB10000, try these steps:
Check the NB10000's remaining power level. Recharge it if the indicator is low or flashing.
Try a different USB cable and charging port on the NB10000.
For low-power devices, make sure Low Current Mode is activated.
Confirm your device is drawing no more than 3A. The NB10000 may shut off if overloaded.
If the mode button has been held down for a prolonged time, the power bank can enter a hidden hibernate mode, which can be exited by charging it again for 10+ minutes.
If problems persist, email us for assistance.
`
},
//*******************************************************************************************
{ Name: 'NEF10',
Context: `
NEF10
Fan, Portable Fan, battery Fan, USB FAN
NiteCore
Portable fan with LED light, adjustable height, hanging and standing modes, and power bank functionality.
3 levels of wind speed available, up to 4.0m/s.
Standing and hanging available and 360° adjustable.
Equipped with a LED ring light with 3 adjustable brightness levels, ideal for daily use.
Detachable fan part and ball head tripod, capable to carry conveniently.
5 adjustable height levels of the ball head tripod suitable for various terrains.
Built-in 10,000mAh large capacity Li-ion battery with a max runtime of 27h.
Designed with USB-C input and USB-A output with an anti-dust cover, capable to be used as a power bank.
Detachable fan hood easy to remove or install for cleaning.
Brushless motor for quiet operation compared to noisy motors.
Adjustable tripod legs can be tilted to desired angle for use on hills, woodlands, and grass.
Multiple usage modes: standing, handheld, or hanging using handle and hook.
Universal 6.35mm screw hole for connecting fan to ball head tripod or other tripods.
Ball Head Tripod, Hook, USB-C Charging Cable
10,000mAh
5V,2A
5V,2A
4W (MAX)
5V,2A, 10W (MAX)
194mm x 175mm x 345mm
655g (±5g)
345mm (MAX)
275mm (MIN)
210mm x 120mm x 190mm
865g
27h
13h
8h
100h
50h
28h
4.5h
When the fan is off, short press the Fan Switch to turn it on. The default starting level of the fan is LOW.
When the fan is on, long press the Fan Switch to turn it off.
Short press the Fan Switch to cycle through the following sequence: LOW, MID, HIGH, Fan Off. The corresponding indicator will turn on during switching.
When the light is off, short press the Light Switch to turn it on. The default starting level of the light is LOW.
When the light is on, long press the Light Switch to turn it off.
Short press the Light Switch to cycle through the following sequence: LOW, MID, HIGH, Lighting Off.
When the fan is on, short press the Timing Switch to turn on the timing function. The default starting level of the timing is 1h.
When the timing function is on, short press the Timing Switch to cycle through the following sequence: 1h, 3h, 5h, Timing Off. The corresponding indicator will turn on during switching.
The NEF10 is available with the USB output, ideal for charging common digital products on the market.
When the product is charging other devices, the Power Indicator will steadily turn blue.
During the charging process, the Power Indicator will steadily turn red.
When the product is fully charged, the Power Indicator will steadily turn green.
When the power is low, the Power Indicator will turn red and flash.
1 year unit replacement with no support after 1 years< (see definition)
https://nitecoresa.co.za/downloads/flyers/NiteCore_NEF10.pdf
https://nitecoresa.co.za/product/NEF10/
https://charger.nitecore.com/Uploads/CHARGERS/download/nef10.pdf
https://youtu.be/r2tMG-mVeQo?list=TLGGGHYWv8hm3YUwMjA1MjAyNA
O NOT use the product in a humid environment (such as the bathroom). Exposure to water may cause product malfunction or damage.
`
},
//*******************************************************************************************
{ Name: 'UA66Q',
Context: `
UA66Q
USB Adapter, Desktop USB Charger, Multi-Port USB Charger
NiteCore
6-port USB desktop charging adapter featuring 5 standard USB ports and 1 Quick Charge 3.0 port, with a total output of 68W.
UA66Q desktop adapter, AC power cable
Plastic housing
109.2mm
80.4mm
28.7mm
222g
485g
165mm
165mm
50mm
100-240V~ 50/60Hz 1.5A (MAX)
5V 10A (2A MAX Per Port), 50W MAX
5V 2A / 9V 2A / 12V 1.5A, 18W MAX
68W MAX
Connect the UA66Q to the power outlet via the AC Power Cable.
Connect the UA66Q to the external devices (smartphones, tablets or other USB devices) via the USB charging cable to begin charging.
Ambient Temperature of Usage: -10~40℃ (14~104℉); Temperature of Storage: -20~60℃ (-4~140℉)
https://nitecoresa.co.za/downloads/flyers/NiteCore_UA66Q.pdf
https://nitecoresa.co.za/product/UA66Q/
https://charger.nitecore.com/Uploads/FLASHLIGHTS/download/1560743322.pdf
https://youtu.be/zinx6oN_A2A?list=TLGG-HCSwh3zRq0wMjA1MjAyNA
Nitecore UA66Q
Charges up to 6 devices simultaneously, Quick Charge 3.0 support on top port.
No USB-C ports, QC 3.0 limited to one port.
`
},
//*******************************
{ Name: 'UA55',
Context: `
UA55
USB Adapter, Desktop USB Charger, Multi-Port USB Charger
NiteCore
5-port USB desktop charging adapter with a total output of 50W.
UA55 desktop adapter, AC power cable
Plastic housing
97.3mm
68.4mm
28.3mm
178.5g
446g
165mm
165mm
50mm
100-240V~ 50/60Hz 1.5A (MAX)
5V 10A (2A MAX Per Port), 50W MAX
Connect the UA55 to the power outlet via the AC Power Cable.
Connect the UA55 to the external devices (smartphones, tablets or other USB devices) via the USB charging cable to begin charging.
Ambient Temperature of Usage: -10~40℃; Temperature of Storage: -20~60℃
https://nitecoresa.co.za/downloads/flyers/Nitecore_UA55Q.pdf
https://charger.nitecore.com/Uploads/FLASHLIGHTS/download/1558410736.pdf
https://youtu.be/zinx6oN_A2A?list=TLGG-HCSwh3zRq0wMjA1MjAyNA
Nitecore UA55
Nitecore UA55
Charges up to 5 devices simultaneously.
No Quick Charge or USB-C ports.
`
},
//*******************************
{ Name: 'UMS4',
Context: `
UMS4
USB li-ion battery desktop charger
NiteCore
4 cyclindrical battery USB desktop charger.
UMS4 charger, Micro-USB power cable, still Needs 5v/3A USB port
High Quality Plastic housing
Automatic and High-Speed Charging.
Real-time Information Display.
Over-Discharged Li-ion Battery Activation.
IMR Battery Restoration.
Intelligent USB.
Four-Slot Superb Charger.
Intelligent USB Four-Slot Superb Charger.
QC 2.0 input available.
Capable of charging 4 batteries simultaneously and controlling each slot independently.
Up to 3,000mA charging speed in a single slot.
Compatible with Li-ion and Ni-MH/Ni-Cd batteries with automatic detection.
Automatic detection of battery power level and automatic selection of the appropriate voltage and charging mode (LiFePO4 and 3.8V Li-ion batteries excluded).
Automatic selection between 3 charging modes (CC, CV and -dV/dt).
Energy-efficient LCD display for real-time charging information.
Capable of manually selecting the charging cut-off voltage and the charging current.
Automatic detection of large/small capacity batteries and automatic selection of appropriate charging current.
Automatic termination upon charging completion.
Reverse polarity protection and short circuit protection.
Over-discharged battery activation.
Li-ion battery restoration.
Overtime charging protection.
Automatic detection of battery internal resistance and display of battery health.
Made from durable and fire-retardant PC materials.
Optimal heat dissipation design.
Certified by RoHS, CE, FCC and CEC.
Insured worldwide by Ping An Insurance (Group) Company of China, Ltd.
DC 5V/2A or higher
18W(MAX) input
4.35V±1%
4.2V±1%
3.7V±1%
1.48V±1%
3,000mA*1 (MAX)
2,000mA*2 (MAX)
1,000mA*4 (MAX)
2,000mA*1 (MAX)
1,000mA*2 (MAX)
500mA*4 (MAX)
10440, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650, 26700
AA, AAA, AAAA, C, D
159mm
107mm
41mm
255.4g
50mm
150mm
180mm
377g
https://nitecoresa.co.za/downloads/flyers/Nitecore_UMS4.pdf
https://charger.nitecore.com/Uploads/FLASHLIGHTS/download/ums4.pdf
2Amp or higher USB adapter.
The UMS4 features 4 independently controlled charging slots.
Insert batteries of supported types into each slot according to the polarity marks on the slot.
After battery installation, the UMS4 begins charging and presents Battery Health by "Good" or "Poor",
Internal Resistance, Charging Current, Battery Voltage, Charged Volume and Charging Time on the LCD screen.
Lithium-ion (Li-ion) batteries have strict requirement on voltage control.
Charging Li-ion batteries with electric voltage beyond safety standard can lead to battery damage and explosion.
3.7V Li-ion batteries are the most common rechargeable Lithium batteries.
The batteries are often marked with 3.6V/3.7V. If our chargers determines that an inserted battery is a Li-ion battery,
the battery will be automatically charged in 4.2V standard charging mode. You do not need extra voltage settings for these types of batteries.
3.8V Li-ion batteries are comparatively rare. It usually has a 3.7V mark.
Normally its seller will inform its buyer that it needs to be charged with 4.35V power.
When charging this type of battery, please manually set the charging voltage to 4.3V,
otherwise the charger will charge at 4.2V by default, and cannot provide adequate charging voltage.
3.2V LiFePO4 batteries have LiFePO4 and/or 3.2V marks.
Be careful with this type of batteries. Without manual setting, our chargers will charge this type of batteries with 4.2V,
and will damage or even explode the battery with excessive charging voltage.
You need to manually set the charging voltage to 3.7V for safe charging.
For all rechargeable Lithium batteries (including Li-ion, IMR and LiFePO4 batteries),
we suggest not using current larger than 1C* for charging. For small capacity batteries, the charging current must be smaller than 1C.
* C=Capacity of a battery. For example, 1C in a 2600mAh rechargeable Lithium battery is 2.6A. 1C in a 3400mAh rechargeable Lithium battery is 3.4A.
Excessively large charging current will lead to great amount of heat, and consequently battery damage and explosion.
Warning: Our chargers automatically judge and select charging current by the batteries' length.
For some long but small capacity batteries (i.e. 12650, 13650, 14650, 16650), please manually set appropriate charging current (smaller than 1C).
DO NOT short circuit the battery in any way.
DO NOT use a 3.7V/3.8V Lithium battery when its voltage is lower than 2.8V, otherwise it can be over-discharged, and/or prone to explosion at next charging.
We strongly recommend batteries with protective circuit. For batteries without protective circuit (such as IMR batteries), please stay alert for over-discharge and short circuit.
DO NOT discharge a battery with a discharging current larger than its maximum rated current.
The charger must be used with NITECORE's official cords. Official cords are identified with clearly printed NITECORE on the plug.
During charging, third party cords can cause malfunction, overheat and even fire on the charger.
Damages from using unofficial cords cannot be covered by official warranty.
The charger is restricted to charging Li-ion, IMR, 3.2V LiFePO4, Ni-MH/Ni-Cd rechargeable batteries only.
DO NOT use the charger with other types of batteries as this could result in battery explosion, cracking or leaking, causing property damage and/or personal injury.
`
},
//*******************************
{ Name: 'UI2',
Context:`
UI2
Portable 2 port USB Li-ion Battery Charger
NiteCore
A portable USB battery charger for charging Li-ion and IMR rechargeable batteries with 2 independent charging slots.
UI2 charger, USB charging cable
High Quality Plastic housing
2 independently controlled charging slots for various sized Li-ion and IMR batteries.
Low current charging mode (100mA) for batteries below 2.9V.
Capable of activating over-discharged Li-ion batteries with protection circuit.
Thermal protection to regulate current when overheated.
Reverse polarity and short circuit protection.
DC 5V
1.6A (MIN)
1000mA (MAX)
100mA
Li-ion, IMR
125mm
30mm
60mm
102g
160mm
75mm
35mm
125g
https://nitecoresa.co.za/downloads/flyers/NiteCore_UI2.pdf
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/ui2.pdf
https://youtu.be/DtU8SwgTJmw?list=TLGGPNthTww9bBMwMjA1MjAyNA
2A or higher USB adapter.
The UI2 features 2 independently controlled charging slots available for charging variously sized rechargeable Li-ion batteries.
Please insert the battery of supported types into the slot according to the polarity mark on the slot.
When the battery is inserted with the polarities reversed, the battery will not be charged, and all 3 indicators will flash to indicate an error.
When the charging status is normal, the indicators will flash to indicate the battery level.
When the battery is fully charged, all 3 indicators will glow steadily. When the charging status is abnormal (e.g. the battery is short-circuited),
all 3 indicators will flash to indicate an error.
The UI2 is available for low current charging below 2.9V.
When a battery with a voltage below 2.9V is inserted, the charger will automatically access the Low Current Charging Mode with a charging current of 100mA.
When a battery with a voltage over 2.9V is inserted, it will access the Standard Mode with a max charging current of 1000mA.
The UI2 is capable of activating over-discharged Li-ion batteries with a protective circuit.
After battery installation, UI2 will test and activate the battery before charging.
When a battery is detected as damaged, the indicators will not be turned on.
In this case, please cease the charging process immediately.
Please DO NOT charge unprotected 0V over-discharged Li-ion batteries, or it will result in fire or even battery explosions.
When the charger is overheated due to the high temperature of the working environment,
the UI2 will automatically regulate the charging current to protect the charger and the battery.
If the battery is inserted with polar reversed or short-circuited,
all 3 indicators will flash to indicate an error.
The charger is restricted to charging Li-ion and IMR rechargeable batteries only.
DO NOT use the charger with other types of batteries as this could result in battery explosion, cracking or leaking, causing property damage and/or personal injury.
The product is globally insured by Ping An Insurance Company.
`
},
//**************************************
{ Name: 'UI1',
Context: `
UI1
Portable USB Li-ion Battery Charger
NiteCore
A portable USB battery charger for charging Li-ion rechargeable batteries with 1 charging slot.
UI1 charger, USB charging cable
1 charging slot for various sized Li-ion batteries.
Low current charging mode (100mA) for batteries below 2.9V.
Capable of activating over-discharged Li-ion batteries with protection circuit.
Thermal protection to regulate current when overheated.
Reverse polarity and short circuit protection.
DC 5v 1A 5W
1000mA (MAX)
100mA
Li-ion
120mm
30mm
30mm
41g
155mm
45mm
35mm
59g
https://nitecoresa.co.za/downloads/flyers/NiteCore_UI1.pdf
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/ui1.pdf
https://youtu.be/DtU8SwgTJmw?list=TLGGPNthTww9bBMwMjA1MjAyNA
1A or higher USB adapter.
The UI1 features 1 charging slot available for charging variously sized rechargeable Li-ion batteries.
Please insert the battery of supported types into the slot according to the polarity mark on the slot.
When the battery is inserted with the polarities reversed, the battery will not be charged, and all 3 indicators will flash to indicate an error.
When the charging status is normal, the indicators will flash to indicate the battery level.
When the battery is fully charged, all 3 indicators will glow steadily. When the charging status is abnormal (e.g. the battery is short-circuited),
all 3 indicators will flash to indicate an error.
The UI1 is available for low current charging below 2.9V.
When a battery with a voltage below 2.9V is inserted, the charger will automatically access the Low Current Charging Mode with a charging current of 100mA.
When a battery with a voltage over 2.9V is inserted, it will access the Standard Mode with a max charging current of 1000mA.
The UI1 is capable of activating over-discharged Li-ion batteries with a protective circuit.
After battery installation, UI1 will test and activate the battery before charging.
When a battery is detected as damaged, the indicators will not be turned on.
In this case, please cease the charging process immediately.
Please DO NOT charge unprotected 0V over-discharged Li-ion batteries, or it will result in fire or even battery explosions.
When the charger is overheated due to the high temperature of the working environment,
the UI1 will automatically regulate the charging current to protect the charger and the battery.
If the battery is inserted with polar reversed or short-circuited,
all 3 indicators will flash to indicate an error.
The charger is restricted to charging Li-ion rechargeable batteries only.
DO NOT use the charger with other types of batteries as this could result in battery explosion, cracking or leaking, causing property damage and/or personal injury.
The product is globally insured by Ping An Insurance Company.
`
},
{ Name: 'D4',
Context: ` D4 Work in progress, content is not yet loaded. `
},
{ Name: 'F4',
Context: ` F4 Work in progress, content is not yet loaded. `
},
{ Name: 'QC3 USB',
Context: ` QC3 USB Work in progress, content is not yet loaded. `
},
//****************************************************************************************************************************
// BATTERIES
//****************************************************************************************************************************
{ Name: 'CR2',
Context:`
CR2
3V Non-Rechargeable Lithium Battery
3V
Lithium
No
https://nitecoresa.co.za/downloads/flyers/NiteCore_CR2.pdf
https://nitecoresa.co.za/product/CR2/
`
},
//***************************
{ Name: 'CR123A',
Context:`
CR123A
Non-Rechargeable 3V Lithium 1600mAh Battery
3V
Lithium
1600mAh
4.8Wh
No
17.8g
Diameter 16.6mm, Length 34.8mm
NONE, not rechargeable, refer to RCR123 or NL166
https://nitecoresa.co.za/downloads/flyers/NiteCore_CR123A.pdf
https://nitecoresa.co.za/product/CR123/
`
},
//***************************
{ Name: 'NBM41',
Context:`
NITECORE NBM41
Multi-purpose Portable Battery Magazine
Ultra Compact and Lightweight
Convenient to carry and allows attachment to a belt, bag, backpack, or storage in a pocket
53±3g (1.89±0.11oz)
50mm x 54.6mm x 99.4mm (1.97cm x 2.15cm x 3.91cm)
- Available to carry 4 × 21700 batteries
- Available to carry 4 x 18650 batteries loosly fitted
High strength and impact resistant, ideal for protecting the batteries inside with the hook-and-loop strap
https://nitecoresa.co.za/downloads/flyers/NiteCore_NBM41.pdf
https://nitecoresa.co.za/product/NBM41/
`
},
//***************************
{ Name: 'NL166',
Context:`
NL166 650mAh or RCR123 or RCR123A or 16340
RCR123 Li-ion Battery FOR HIGH DRAIN DEVICES
650mAh
3.7V
Maximum 650mA (300mA recommended)
17.8g
Diameter 16.6mm, Length 34.8mm
12 months warranty
- Never expose an RCR123 battery to water or fire.
- To extend battery life, it is recommended that a NL166 is charged every three months when unused for long periods.
- Microporous barrier protects delicate internal components
- Pressure relief valve activates in the event of a rapid temperature increase
- Built-in PTC to inhibit high current surges
- Innovative anode design with high-temperature resistance
I2, I4, D2, D4, UI1, UI2, UMS4
- Equipped at both ends with a nickel-plated S.S protector ensuring high impact resistance, good electrical conductivity, and oxidation resistance
- Tough plastic circuit board protector
- Coated with durable metallic film to guard against abrasion
- Automatically protects against overcharge, over-discharge, and short-circuiting
- Utilizes a high-quality battery protection IC from Seiko Instruments Japan
- Utilizes high-power MOS-FEE in the current regulation module for better efficiency and superior output
- Actual measured capacity is approximately 650mAh
- A high output current of up to 4A makes NL166 compatible with various kinds of high-drain devices
- Positive end is a standard button size allowing maximum equipment compatibility
- Compatible with most brands of devices but take note that a li-ion RCR123 is 3.7v and a non rechargeble CR123 is 3.0v.
- A NL166 battery can be recharged over 500 times, the equivalent of 500+ CR123 batteries
https://nitecoresa.co.za/downloads/flyers/NiteCore_NL166.pdf
https://nitecoresa.co.za/product/RCR123/
`
},
//***************************
{ Name: 'NL1485',
Context:`
NL1485
NL1485 Li-ion Battery. High Capacity
The 14500 is the size of a AA battery, it is not an AA battery as it is 3.7v and a normal AA battery is 1.2v or 1.5v
850mAh
3.7V
0.8A
5.2 cm
1.4 cm
21 grams
I2, I4, D2, D4, UI1, UI2, UMS4
- Pressure relief valve protection activates in the event of a rapid temperature increase.
- Innovative anode design with high temperature resistance.
- Microporous barrier protects delicate internal components.
- Built-in PTC inhibits high current surges.
- Automatically protects against overcharge, over discharge, and short-circuit.
- Utilizes a high-quality battery protection IC.
- Utilizes high power MOS FETs in the current regulation module for better efficiency and superior output.
- The NL1485 battery can be recharged over 500 times.
- High strength plastic wrapper for preventing tear and wear.
- Equipped with nickel-plated stainless steel protectors ensuring high impact resistance, good electrical conductivity, and oxidation resistance.
- To extend battery life, the battery should be charged every three months when unused for long periods.
https://nitecoresa.co.za/downloads/flyers/NiteCore_NL1485.pdf
https://nitecoresa.co.za/product/14500/
`
},
//***************************
{ Name: 'NL1835HP',
Context:`
NL1835HP
NITECORE NL1835HP High current Protected Li-ion Battery.
3500mAh
3.6v 8A 12.6Wh
49.9g
69.7±0.3mm
18.5±0.2mm
12 months warranty
I2, I4, D2, D4, UI1, UI2, UMS4
Most models using a button top 18650.
Flashlights: TM38 Lite, TM39 Lite, Ci7.
Headlamps: HC65V2, HC68, HC33
Continuous discharge up to 8A
Suitable for high power 18650 based illumination products.
The NL1835HP will not increase the output of a standard device that does not require 8A current.
Normally a device of 1200 Lumens upward per battery will benefit from using this model.
A normal flashlight of 1000 Lumens will not show a benefit compared to a standard 18650.
Pressure relief valve protection
Built-in PTC inhibiting high current surges
Microporous barrier protects internal components
Overcharge, over-discharge and short-circuit protection
High-quality battery protection IC
Nickel-plated steel protectors at both ends for impact and oxidation resistance
Durable metallic wrapper guards against abrasion
Low cost and environmentally friendly (can be recharged over 500 times)
https://nitecoresa.co.za/downloads/flyers/NiteCore_NL1835HP.pdf
https://nitecoresa.co.za/product/NL1835HP/
`
},
//***************************
{ Name: 'NL1836',
Context:`
NL1836
NITECORE NL1836 18650 High-Performance Li-ion Rechargeable Battery
3600mAh 3.6V (12.96Wh)
18.6mm ± 0.3mm
69.8mm ± 0.3mm
49 grams
12 months warranty
I2, I4, D2, D4, UI1, UI2, UMS4
Various older models including:
Flashlights: MH11, P30 ,EF1 (needs charger), DL20 (Needs charger)
Headlamps: HC60, HC60v2.
High capacity ensures stable and long-lasting power supply
Pressure relief valve for rapid temperature increase
Built-in intelligent protective circuit protects against overcharge, over-discharge, and short-circuiting
High-quality battery protection IC
High-power MOS FET in current regulation module for better efficiency and output
Nickel-plated steel protectors at both ends for impact resistance, conductivity and oxidation resistance
Durable metallic film coating guards against abrasion
Mercury free, lead free, cadmium free
Low cost and environmentally friendly rechargeable battery (can be recharged over 500 times)
https://nitecoresa.co.za/downloads/flyers/NiteCore_NL1836.pdf
https://nitecoresa.co.za/product/NL1836/
`
},
//***************************
{ Name: 'NL1836HP',
Context:`
NL1836HP
NITECORE NL1836HP High Performance Protected Li-ion Battery
3,600mAh
3.6V
12.96Wh
18.6mm±0.3mm / 1.86cm±0.03cm
69.8mm±0.3mm / 6.98cm±0.03cm
49g
12 months warranty
8A
High Capacity ensures stable and long-lasting power supply for various devices
8A Continuous Discharge Current, ideal for high strain devices
I2, I4, D2, D4, UI1, UI2, UMS4
Most models using a button top 18650.
Flashlights: TM38 Lite, TM39 Lite, Ci7.
Headlamps: HC65V2, HC68, HC33
Built-in intelligent protective circuit of the positive polarity protects against overcharge, over discharge, and short-circuiting
Pressure relief valve activates in the event of a rapid temperature increase
Purpose-designed
Effectively protects against overcharge, over discharge, and short-circuiting
Utilizes a high-quality battery protection IC
Utilizes high-power MOS-FEE in the current regulation module for better efficiency and superior output
Equipped at both ends with a nickel-plated stainless steel protector ensuring high impact resistance, good electrical conductivity, and oxidation resistance
Coated with durable metallic film to guard against abrasion
Mercury Free, Lead Free, and Cadmium Free for safe use and storage
Low Cost and Environmentally Friendly
A NL1836HP battery can be recharged over 500 times
https://nitecoresa.co.za/downloads/flyers/NiteCore_NL1836HP.pdf
https://nitecoresa.co.za/product/NL1836HP/
`
},
//***************************
{ Name: 'NL1836R',
Context:`
NL1836R
NITECORE NL1836R 18650 USB-C Rechargeable Li-ion Battery
3600mAh
3.6V
12.96Wh
1.85±0.03cm
7.1±0.03cm
50g
12 months warranty
3600mAh capacity ensures stable and long-lasting power supply for various devices
USB-C Rechargeable with charging indicators (green light on when fully charged, red light on during charging)
Internal safety features include a built-in intelligent protective circuit of the positive end that protects against overcharge, over-discharge, and short-circuiting
Pressure relief valve activates in the event of a rapid temperature increase
I2, I4, D2, D4, UI1, UI2, UMS4, USB-C Cable
Various older 18650 models including:
Flashlights: MH11, P30 ,EF1 (needs charger), DL20 (Needs charger)
Headlamps: HC60, HC60v2.
Effectively protects against overcharge, over-discharge, and short-circuiting
Utilizes a high-quality battery protection IC
Utilizes high-power MOS-FEE in the current regulation module for better efficiency and superior output
Equipped at both ends with a nickel-plated stainless steel protector ensuring high impact resistance, good electrical conductivity, and oxidation resistance
Coated with durable metallic film to guard against abrasion
Mercury Free, Lead Free, and Cadmium Free for safe use and storage
Low cost and environmentally friendly, with the ability to be recharged over 500 times
Safe and reliable, globally insured, and multiple global certifications approved
https://nitecoresa.co.za/downloads/flyers/NiteCore_NL1836R.pdf
https://nitecoresa.co.za/product/NL1836R/
`
},
//***************************
{ Name: 'NL1840',
Context:`
NL1840
NITECORE NL1840 High Performance Rechargeable Lithium Battery
4000mAh
3.6V
14.4Wh
A NL1840 battery still retains over 80% of its original capacity at 500 full charging cycles
I2, I4, D2, D4, UI1, UI2, UMS4
Various older 18650 models including:
Flashlights: MH11, P30 ,EF1 (needs charger), DL20 (Needs charger)
Headlamps: HC60, HC60v2.
The First 4000mAh 18650 Li-ion Battery
Features an energy density of 288mWh/g
IPX6 Water Resistant
Built-in intelligent protective circuit of the positive polarity protects against overcharge, over discharge, and short-circuiting
Pressure relief valve activates in the event of a rapid temperature increase
Effectively protects against overcharge, over discharge, and short-circuiting
Utilizes a high-quality battery protection IC
Utilizes high-power MOS-FEE in the current regulation module for better efficiency and superior output
Equipped at both ends with a nickel-plated stainless steel protector ensuring high impact resistance, good electrical conductivity, and oxidation resistance
Coated with durable metallic film to guard against abrasion
Mercury Free, Lead Free, and Cadmium Free for safe use and storage
Safe and Reliable, Globally insured and multiple global certifications approved
Capacity: 4000mAh 3.6V (14.4Wh)
Diameter: 18.6mm±0.3mm
Length: 69.8mm±0.3mm
Weight: 50 grams.
Warranty Period: 12 months warranty.
https://nitecoresa.co.za/downloads/flyers/NiteCore_NL1840.pdf
https://nitecoresa.co.za/product/NL1840/
`
},
//***************************
{ Name: 'NL2150',
Context:`
NL2150
NITECORE NL2150 21700 Li-ion Rechargeable Battery
5000mAh 3.6V (18Wh)
8A Continuous Discharge Current
Flashlights: MH40S.
Lanterns: LR60.
Worklight: NWL20.
21.6±0.3mm
75.2±0.3mm
73g
12 months warranty
Single polarity both ends.
High energy density
Long lifespan
Pressure relief valve for rapid temperature increase
Innovative anode design with high-temperature resistance
Built-in PTC to inhibit high current surges
Overcharge, over-discharge and short-circuit protection
High-quality battery protection IC
High-power MOS FETs in current regulation module
Nickel-plated steel protectors at both ends for impact resistance, conductivity and oxidation resistance
Durable metallic film coating guards against abrasion
Tough plastic circuit board protector
Mercury free, lead free, cadmium free
UMS4, UI1, UI2
https://nitecoresa.co.za/downloads/flyers/NiteCore_NL2150.pdf
https://nitecoresa.co.za/product/NL2150/
`
},
//***************************
{ Name: 'NL2150HPi',
Context:`
NL2150HPi
NITECORE NL2150HPi 21700 i Series Battery
5000mAh 3.6V
15A Continuous Discharge Current
Flashlights: P20i, P20iX, I4000R, P23i, PP30i, P35i, i series flashlights.
Headlamps: HC35
21.9±0.3mm
77.2±0.3mm
75.5g
12 months warranty
Dual polarities at both ends
High energy density up to 240mWh/g
Minimizes power loss due to internal resistance
Enables direct energy conversion
Revolutionary and upgraded battery design
Globally insured and multiple global certifications approved
Pressure relief valve for rapid temperature increase
Innovative anode design with high-temperature resistance
Built-in PTC to inhibit high current surges
Microporous barrier protects internal components
Overcharge, over-discharge and short-circuit protection
High-quality battery protection IC
High-power MOS FETs in current regulation module
Nickel-plated steel strips at both ends for impact resistance, conductivity and oxidation resistance
Durable metallic film coating guards against abrasion
Tough plastic circuit board protector
Mercury free, lead free, cadmium free
UMS4, UI1, UI2
https://nitecoresa.co.za/downloads/flyers/NiteCore_NL2150HPI.pdf
https://nitecoresa.co.za/product/NL2150HPI/
`
},
//***************************
{ Name: 'NL2150R',
Context:`
NL2150R
NITECORE NL2150R 21700 Li-ion USB-C Rechargeable Battery
5000mAh 3.6V (18Wh)
8A Continuous Discharge Current
USB-C
21.7±0.3mm
77.2±0.3mm
12 months warranty
Flashlights: new P30.
Lantern: LR60 (Tight Fit)
UI1, UI2, UMS4, USB-C Cable
High energy density
Long lifespan
Dual charging ways (USB-C cable or external charger)
USB-C charging indicators (red light on during charging, green light on when fully charged)
Pressure relief valve for rapid temperature increase
Microporous barrier protects internal components
Innovative anode design with high-temperature resistance
Built-in PTC to inhibit high current surges
Overcharge, over-discharge and short-circuit protection
High-quality battery protection IC
High-power MOS FETs in current regulation module
Nickel-plated steel protectors at both ends for impact resistance, conductivity and oxidation resistance
Durable metallic film coating guards against abrasion
Tough plastic circuit board protector
https://nitecoresa.co.za/downloads/flyers/NiteCore_NL2150R.pdf
https://nitecoresa.co.za/product/NL2150R/
`
},
//***************************
{ Name: 'NL2150RX',
Context:`
NL2150RX
NITECORE NL2150RX High Performance USB-C Bidirectional Charging Li-ion Battery
5000mAh at 3.7v and 3050mAh at 5V (TYP 1A)
3.6V
18Wh
8A Continuous Discharge Current
USB-C Input / Output
Efficient USB-C Power Supply (can charge other devices)
UMS4, UI1, UI2, USB-C Cable
Flashlights: New P30
Integrated smart charging circuitry in the anode
Protects against overcharge, over discharge, and short-circuit
Built-in PTC to inhibit high current surges
Microporous barrier protects delicate internal components
Pressure relief valve protection activates in the event of a rapid temperature increase
USB-C Rechargeable
During Charging: Red light flashes
Fully Charged: Red light constant-on
Automatically protects against overcharge, over discharge, and short-circuit
Utilizes a high-quality battery protection IC
Utilizes two high-power MOS FETs in the current regulation module for better efficiency and superior output
Equipped at both ends with nickel-plated stainless steel protector ensuring high impact resistance, good electrical conductivity, and oxidation resistance
Coated with durable metallic film to guard against abrasion
Tough plastic circuit board protector
Low Cost and Environmentally Friendly, Using a rechargeable Li-ion battery is energy saving to minimize the carbon footprint
Capacity: 5000mAh at 3.6V (18Wh)
Capacity: 3050mAh at 5V (TYP 1A)
Input: USB-C: 5V=2.5A
Output: USB-C: 5V=2A
Length: 7.88cm ± 0.02cm
Diameter: 2.17cm ± 0.03cm
Weight: 74.5g
Warranty Period: 12 months warranty
Never expose the battery to water or fire
Do NOT store the battery in a confined area with a high temperature above 50°C (122°F)
When charging or using batteries, ensure the positive and negative ends correspond with the positive (+) and negative (-) symbols
To extend battery life, it is recommended that it is charged every three months when unused for long periods
https://nitecoresa.co.za/downloads/flyers/NiteCore_NL2150RX.pdf
https://nitecoresa.co.za/product/NL2150RX/
`
},
//***************************
{ Name: 'NL2153HPi',
Context:`
NL2153HPi
Nitecore NL2153HPi 21700 i Series Battery, 5300mAh, 20A
Flashlights: P20i, P20iX, I4000R, P23i, PP30i, P35i, i series flashlights.
Headlamps: HC35
5300mAh 3.6V (19.08Wh)
22.2±0.3mm
77.2±0.3mm
75g
12 months
The dual polarities at both ends.
20A Continuous Discharge Current - Ideal for high drain devices.
500 Full Charging Cycles - Low cost and environmentally friendly - Can be recharged over 500 times.
Built-in intelligent protective circuit on positive polarity.
Protects against overcharge.
Protects against over discharge.
Protects against short-circuiting.
Pressure relief valve activates with rapid temperature increase.
Nickel-plated stainless steel protectors at both ends.
High impact resistance, electrical conductivity, oxidation resistance.
Durable metallic film coating guards against abrasion.
Mercury free.
Lead free.
Cadmium free.
Globally insured.
UMS4, UI1, UI2
https://nitecoresa.co.za/downloads/flyers/NiteCore_NL2153HPI.pdf
https://nitecoresa.co.za/product/NL2153HPi/
`
},
//**********************************************
// BAGS
//**********************************************
{
Name: 'BP16',
Context: `
BP16
Backpack; Commuter Backpack; Business Backpack
NiteCore
Ultra-lightweight and compact 16-liter commuter backpack designed for simplicity, fashion, and ergonomic comfort.
BP16 backpack
Nitecore BP16 Commuter Backpack
500D polyester fabric with water and scratch-resistant coating
815g
14cm
29cm
46cm
16 liters
Full frontal opening for quick access
Fits 14-inch laptop/tablet
Flocking fabric and padded sleeve for shock resistance and impact protection
Made of polymer insulation composite material
Foil lining reflects thermal radiation
Backpack for commuting
Carry-on bag for business trips
User-friendly laptop compartment (14-inch)
Mesh zippered pocket for documentation, keys, and earphones
Dual internal side pockets for smartphones, power banks, pens, umbrellas, and bottles
Frontal flocking zippered compartment for personal belongings
Built-in clip for hanging keys, keychain lights, or sundries
Tool tensile webbings for flashlights, utility knives, and tactical pens
Mesh pocket for small items
Widened S-shape padded shoulder straps
Ergonomic comfort and breathability
Frontal MOLLE system with high-strength straps
Compatible with NUP10, NUP20, NDP20, and other modular extensions (sold separately)
Premium zippers and extended pull tabs
Sternum strap for quick adjustment
Reinforced polyester handle
Loop areas for nametapes and reflective stickers
Water-resistant coating for all weather conditions
Commuting, business trips
NUP10, NUP20, NDP20, and other modular extensions
Versatile, lightweight, and durable with multiple compartments and ergonomic design
Limited capacity compared to larger backpacks
Information not provided
https://nitecoresa.co.za/downloads/flyers/NiteCore_BP16.pdf
https://nitecoresa.co.za/product/BP16/
`
},
{
Name: 'BP18',
Context: `
BP18
Backpack; Commuter Backpack; Overnight Backpack
NiteCore
18-liter ultra-lightweight commuter backpack designed in collaboration with Lii Gear, featuring quick release shoulder straps and Fishbone Carrying System.
BP18 backpack
Nitecore BP18 Commuter Backpack
500D Nylon fabric with dirt and water-resistant coating
710g
16cm
24cm
47cm
18 liters
Dual opening methods: Frontal full opening and top opening
Fits 14-inch laptop/tablet with cotton cushion
Frontal interior hook surface for modular extensions
Dual side interior compartments for small gadgets
Hanger for hydration pack
Fishbone Carrying System for ergonomic comfort and breathability
Quick release shoulder straps for switching between backpack and sling bag modes
Sternum strap for quick adjustment
Frontal and side MOLLE straps for attaching tools, pouches, and modular extensions
Premium YKK zippers
UTX Duraflex buckles
Extended pull tabs
Duct channel design for drink tube or charging cable
Reinforced polyester handle
Loop areas for nametapes and reflective stickers
Frontal zipped compartment for quick access
Shoulder strap mounting system
Concealed anti-hook side compartments for bottles and umbrellas
Dirt and water-resistant coating for all-weather applications
Commuting, business trips, overnight trips
Various modular extensions (sold separately)
Ultra-lightweight, versatile with dual opening methods, ergonomic carrying system, and modular expandability
Modular extensions sold separately
Designed in collaboration with Lii Gear, established by Lii, a senior military and outdoor enthusiast
Information not provided
https://nitecoresa.co.za/downloads/flyers/NiteCore_BP18.pdf
https://nitecoresa.co.za/product/BP18/
`
},
{
Name: 'BP23',
Context: `
BP23
Backpack; Commuter Backpack; Multipurpose Backpack
NiteCore
23-liter multipurpose commuting backpack designed for commuters and overnighters, featuring multiple compartments and ergonomic design.
BP23 backpack
Nitecore BP23 Multipurpose Commuting Backpack
600D Polyester fabric with dirt and water-resistant coating
1,030 grams
47 cm
29 cm
15 cm
23 liters (1,404 cubic centimeters)
Multifunctional with large capacity
7 sections for organized packing
Dual internal side pockets for bottles, umbrellas, power banks, and more
Mesh zippered pocket in the front suitable for storing passports and more
Can carry a 15.6 inch (39.62 cm) laptop/tablet with shock resistance and impact resistance
Full opening design for easy access to large items
Four-section design for organized packing
Three-way divider for quick access to items from various directions
Flock liner effectively protects smartphones and other electronic devices
Ergonomic carrying system with padded shoulder straps
Breathable mesh lining for added
comfort
Adjustable chest and waist straps for stability
3D mesh padding for comfort and heat dissipation
Frontal MOLLE system for compatibility with modular extensions
Made of high-strength polyester fabric for durability
Zip pockets and mesh compartments for practical storage
Dirt and water-resistant coating suitable for all-weather conditions
Commuting, business trips, multipurpose use
Compatible with various modular extensions (sold separately)
High capacity, multiple compartments, ergonomic design, modular expandability
More substantial weight compared to smaller backpacks
Information not provided
https://nitecoresa.co.za/downloads/flyers/NiteCore_BP23.pdf
https://nitecoresa.co.za/product/BP23/
`
},
{
Name: 'NUP10',
Context: `
NUP10
Utility Pouch; Modular Pouch
NiteCore
Utility pouch designed for quick access to essential items, compatible with MOLLE systems and various backpacks.
NUP10 utility pouch
Nitecore NUP10 Utility Pouch
Durable nylon fabric
200 grams
11 cm
15 cm
5 cm
Large capacity for essential items
MOLLE compatible for versatile attachment
Multiple internal pockets for organization
Premium zippers for durability
Adjustable strap for easy carrying
Water-resistant fabric
Utility storage, modular attachment
Compatible with various MOLLE accessories (sold separately)
Versatile and durable with MOLLE compatibility
Limited capacity compared to larger pouches
Information not provided
https://nitecoresa.co.za/downloads/flyers/NiteCore_NUP10.pdf
https://nitecoresa.co.za/product/NUP10/
`
},
{
Name: 'NUP30',
Context: `
NUP30
Utility Pouch; Modular Pouch
NiteCore
Multi-purpose utility pouch designed for versatile storage and attachment, featuring durable construction and MOLLE compatibility.
NUP30 utility pouch
Nitecore NUP30 Multi-Purpose Utility Pouch
High-strength nylon fabric
250 grams
12 cm
17 cm
6 cm
Large main compartment for versatile storage
Multiple internal pockets for better organization
MOLLE compatible for various attachments
Durable zippers and buckles
Adjustable strap for carrying convenience
Water-resistant construction
Versatile storage, modular attachment
Compatible with other MOLLE accessories (sold separately)
Multi-purpose design with high-strength fabric and MOLLE compatibility
Relatively large size may be cumbersome for some users
Information not provided
https://nitecoresa.co.za/downloads/flyers/NiteCore_NUP30.pdf
https://nitecoresa.co.za/product/NUP30/
`
},
{
Name: 'NPP30',
Context: `
NPP30
Utility Pouch; Pocket Pouch
NiteCore
Compact pocket pouch designed for small essentials, offering modular attachment options and durable construction.
NPP30 pocket pouch
Nitecore NPP30 Pocket Pouch
Sturdy nylon fabric
150 grams
10 cm
12 cm
4 cm
Compact design for small items
MOLLE compatible for easy attachment
Single internal pocket for organization
High-quality zippers and buckles
Compact size for portability
Water-resistant fabric
Storage of small essentials, modular attachment
Compatible with various MOLLE accessories (sold separately)
Compact and versatile with MOLLE compatibility
Limited storage capacity
Information not provided
https://nitecoresa.co.za/downloads/flyers/NiteCore_NPP30.pdf
https://nitecoresa.co.za/product/NPP30/
`
},
{ Name: 'NTP30',
Context: ` NTP30 Work in progress, content is not yet loaded. `
},
{ Name: 'NTK10',
Context: ` NTK10 Work in progress, content is not yet loaded. `
},
{ Name: 'BLOWERBABY',
Context: ` BlowerBaby Work in progress, content is not yet loaded. `
},
{ Name: 'NEF10',
Context: ` NEF10 Work in progress, content is not yet loaded. `
},
{ Name: 'EMR06',
Context: ` EMR06 Work in progress, content is not yet loaded. `
},
{ Name: 'GM02MH',
Context: ` GM02MH Work in progress, content is not yet loaded. `
},
{ Name: 'RSW21',
Context: ` RSW21 Work in progress, content is not yet loaded. `
},
{ Name: 'NTP31',
Context: ` NTP31 Work in progress, content is not yet loaded. `
},
{ Name: 'RSW3',
Context: ` RSW3 Work in progress, content is not yet loaded. `
},
{ Name: 'GM02',
Context: ` GM02 Work in progress, content is not yet loaded. `
},
{ Name: 'EMR05',
Context: ` EMR05 Work in progress, content is not yet loaded. `
},
{ Name: 'GM01',
Context: ` GM01 Work in progress, content is not yet loaded. `
},
{ Name: 'NTR10',
Context: ` NTR10 Work in progress, content is not yet loaded. `
},
{ Name: 'NBM41',
Context: ` NBM41 Work in progress, content is not yet loaded. `
},
{ Name: 'NTH20',
Context: ` NTH20 Work in progress, content is not yet loaded. `
},
{ Name: 'NCCAP',
Context: ` NCCAP Work in progress, content is not yet loaded. `
},
{ Name: 'MICROUSB',
Context: ` MICROUSB Work in progress, content is not yet loaded. `
},
{
Name: 'EMR06',
Context: `
EMR06
Mosquito Repeller
NiteCore
Portable mosquito mat heater
EMR06 Mosquito Repeller, USB-C Charging Cable, MOLLE System Bracket, Lanyard, no mats, use standard RSA mats
Impact resistant material with IPX5 water resistance rating
Single power button interface
71.8g ± 5g (2.53 oz ± 0.18 oz) (Accessories Not Included)
55mm x 91.5mm x 28.3mm (2.17 x 3.60 x 1.11in)
1,800mAh 6.66Wh
Built-in Li-ion battery
Up to 3.5 hours runtime
Input: 5V - 1A (5W MAX)
Power Indicator flashes green when charging
Power Indicator steady green when full
Power Indicator alternates between green and blue when charging while operating
FCB Heating System
165°C / 329°F MAX temperature
Surface temperature below 45°C
Power consumption: 514mAh per hour (40% less than conventional)
IPX5 Waterproof Rating
1.5m impact resistant
12ft protection zone
10 minutes activation time to mat being heated
Short press then long press Power Button when off to turn on
Long press Power Button when on to turn off
Double press Power Button for voltage indication
Size: 34mm x 48mm
Duration: when plugged in the mat will last as per mat specification. When running from battery, until battery is flat 3h.
Works with conventional mosquito repellent mats available in South Africa
MOLLE system bracket included, compatible with MOLLE systems and webbings
Airline Approved
Ultra lightweight and compact design
40% lower heating area temperature than conventional solutions
60% less power consumption than conventional solutions
Do not cover during use
Store in dry, room temperature area
Recharge every 3 months during prolonged storage
Allow to cool completely before storage
compact, portable design with battery
small coverage area
Ensure device is properly charged and power button is operated correctly (short press then long press for activation). For optimal performance,
ensure repellent mat is properly inserted and device is placed upwind in outdoor settings. Multiple units may be required for larger areas.
https://nitecoresa.co.za/downloads/flyers/NiteCore_EMR06.pdf
https://nitecoresa.co.za/product/EMR06/
https://flashlight.nitecore.com/Uploads/FLASHLIGHTS/download/EMR06.pdf
https://www.youtube.com/watch?v=3_nNskLBTDA
`
},
{
Name: 'EMR05',
Context: `
EMR05
Mosquito Mat heater
NiteCore
Portable mosquito mat heater with USB power
EMR05 , USB-C Charging Cable, MOLLE System Bracket, Lanyard
Impact resistant material with IPX5 water resistance ratin
Single power button interface (indicator light)
39.1g ± 5g (1.38 oz ± 0.18 oz) (Accessories Not Included)
63.5mm x 52.7mm x 26.8mm (2.5 x 2.07 x 1.06 in) (Accessories not included)
No built-in battery, powered by external USB source only.
Input: 5V - 2A
Use USB-C cable to connect an external power supply (USB adapter, power bank, etc.)
Heating Temperature: 165°C ± 5°C
Protection Zone: 2m radius
IPX5 Waterproof Rating
Do not leave unattended when in use
Do not expose to temperatures above 60°C (140°F) for long
Do not put it in water
On: Long press the Power Button (indicator turns blue)
Off: Long press the Power Button (indicator goes off)
Insert a repellent mat into the Repellent Mat Placement Area (when the device is off)
Long press the Power Button to activate
Protection zone created after 10 minutes
Turn off after use by long pressing the Power Button. Store after cooling
Size: 34mm x 48mm / 1.34 x 1.89 in
Note: Use local South African Mosquito repellent mats, not included
Duration: when plugged in the mat will last as per mat specification.
MOLLE system bracket included, compatible with MOLLE systems and webbings
Portable design with USB charging port
Multiple units can be used together for larger protection zones
Do not cover during use
compact, portable design with USB power port
requires external power source
Ensure device is properly connected to a power source and power button is operated correctly (long press for activation). For optimal performance,
ensure repellent mat is properly inserted and device is placed upwind in outdoor settings.
https://example.com/downloads/flyers/NiteCore_EMR05.pdf
https://example.com/product/EMR05/
https://example.com/Uploads/FLASHLIGHTS/download/EMR05.pdf
https://www.youtube.com/watch?v=example
`
}